| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20060731165011.GA6659@htj.dyndns.org>
Date: Tue, 1 Aug 2006 01:50:11 +0900
From: Tejun Heo <htejun@...il.com>
To: Alan Cox <alan@...rguk.ukuu.org.uk>
Cc: "J.A. Magall?n" <jamagallon@....com>,
"Linux-Kernel," <linux-kernel@...r.kernel.org>,
linux-ide@...r.kernel.org, Jeff Garzik <jgarzik@...ox.com>,
Andrew Morton <akpm@...l.org>
Subject: Re: [2.6.18-rc2-mm1] libata ate one PATA channel
On Mon, Jul 31, 2006 at 05:31:29PM +0100, Alan Cox wrote:
> Ar Maw, 2006-08-01 am 01:00 +0900, ysgrifennodd Tejun Heo:
> > These are patches #110-112. Andrew, can you drop those patches for the
> > time being? I'm working on integrating those into libata #upstream now.
>
> If you drop the host_set and tuning patches please drop all the PATA
> stuff and my other patches out. I don't have time to field a second
> batch of hundreds of "why has my drive stopped working, why is the speed
> wrong" emails.
Didn't realize pata stuff relies on it.
> It'll be easier just to work outside the -mm tree with all this
> continued in/out random breakage if people are just going to say "drop
> xyz patch" rather than actually specifying *what is actually wrong* and
> getting me to fix the merge (Tejun that last one sentence is a hint ;))
Okay, took the hint. Magallon, can you please try the following
patch?
Index: work/drivers/scsi/libata-bmdma.c
===================================================================
--- work.orig/drivers/scsi/libata-bmdma.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/libata-bmdma.c 2006-08-01 01:46:57.000000000 +0900
@@ -905,8 +905,6 @@ static struct ata_probe_ent *ata_pci_ini
return NULL;
probe_ent->legacy_mode = 1;
- probe_ent->n_ports = 1;
- probe_ent->hard_port_no = 0;
probe_ent->private_data = port[0]->private_data;
if (port_mask & ATA_PORT_PRIMARY) {
@@ -928,12 +926,10 @@ static struct ata_probe_ent *ata_pci_ini
else {
/* Secondary only. IRQ 15 only and "first" port is port 1 */
probe_ent->irq = 15;
- probe_ent->hard_port_no = 1;
}
probe_ent->port[port_num].cmd_addr = ATA_SECONDARY_CMD;
probe_ent->port[port_num].altstatus_addr =
probe_ent->port[port_num].ctl_addr = ATA_SECONDARY_CTL;
- port_num ++;
if (bmdma) {
probe_ent->port[port_num].bmdma_addr = bmdma + 8;
if (inb(bmdma + 10) & 0x80)
@@ -942,6 +938,9 @@ static struct ata_probe_ent *ata_pci_ini
ata_std_ports(&probe_ent->port[port_num]);
port_num ++;
}
+
+ probe_ent->n_ports = port_num;
+
return probe_ent;
}
Index: work/drivers/scsi/ata_jmicron.c
===================================================================
--- work.orig/drivers/scsi/ata_jmicron.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/ata_jmicron.c 2006-08-01 01:46:57.000000000 +0900
@@ -44,8 +44,8 @@ static int jmicron_pre_reset(struct ata_
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u32 control;
u32 control5;
- int port_mask = 1<< (4 * ap->hard_port_no);
- int port = ap->hard_port_no;
+ int port_mask = 1<< (4 * ap->port_no);
+ int port = ap->port_no;
port_type port_map[2];
/* Check if our port is enabled */
Index: work/drivers/scsi/ata_piix.c
===================================================================
--- work.orig/drivers/scsi/ata_piix.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/ata_piix.c 2006-08-01 01:46:57.000000000 +0900
@@ -581,7 +581,7 @@ static void ich_pata_cbl_detect(struct a
goto cbl40;
/* check BIOS cable detect results */
- mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
+ mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
if ((tmp & mask) == 0)
goto cbl40;
@@ -605,7 +605,7 @@ static int piix_pata_prereset(struct ata
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
return 0;
@@ -633,7 +633,7 @@ static int ich_pata_prereset(struct ata_
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
return 0;
@@ -670,7 +670,7 @@ static int piix_sata_prereset(struct ata
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
struct piix_host_priv *hpriv = ap->host_set->private_data;
const unsigned int *map = hpriv->map;
- int base = 2 * ap->hard_port_no;
+ int base = 2 * ap->port_no;
unsigned int present = 0;
int port, i;
u16 pcs;
@@ -721,7 +721,7 @@ static void piix_set_piomode (struct ata
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
unsigned int is_slave = (adev->devno != 0);
- unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40;
+ unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
u16 master_data;
u8 slave_data;
@@ -756,9 +756,9 @@ static void piix_set_piomode (struct ata
/* enable PPE1, IE1 and TIME1 as needed */
master_data |= (control << 4);
pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data &= (ap->hard_port_no ? 0x0f : 0xf0);
+ slave_data &= (ap->port_no ? 0x0f : 0xf0);
/* Load the timing nibble for this slave */
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->hard_port_no ? 4 : 0);
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
} else {
/* Master keeps the bits in a different format */
master_data &= 0xccf8;
@@ -777,7 +777,7 @@ static void piix_set_piomode (struct ata
if (ap->udma_mask) {
pci_read_config_byte(dev, 0x48, &udma_enable);
- udma_enable &= ~(1 << (2 * ap->hard_port_no + adev->devno));
+ udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
pci_write_config_byte(dev, 0x48, udma_enable);
}
}
@@ -798,10 +798,10 @@ static void piix_set_piomode (struct ata
static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, int isich)
{
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
- u8 master_port = ap->hard_port_no ? 0x42 : 0x40;
+ u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
- int devid = adev->devno + 2 * ap->hard_port_no;
+ int devid = adev->devno + 2 * ap->port_no;
u8 udma_enable;
static const /* ISP RTC */
@@ -879,9 +879,9 @@ static void do_pata_set_dmamode (struct
master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
master_data |= control << 4;
pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= (0x0F + 0xE1 * ap->hard_port_no);
+ slave_data &= (0x0F + 0xE1 * ap->port_no);
/* Load the matching timing */
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->hard_port_no ? 4 : 0);
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
pci_write_config_byte(dev, 0x44, slave_data);
} else { /* Master */
master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
Index: work/drivers/scsi/libata-core.c
===================================================================
--- work.orig/drivers/scsi/libata-core.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/libata-core.c 2006-08-01 01:46:57.000000000 +0900
@@ -5265,8 +5265,6 @@ static void ata_host_init(struct ata_por
ap->dev = ent->dev;
ap->port_no = port_no;
- ap->hard_port_no =
- ent->legacy_mode ? ent->hard_port_no : port_no;
ap->pio_mask = ent->pio_mask;
ap->mwdma_mask = ent->mwdma_mask;
ap->udma_mask = ent->udma_mask;
Index: work/drivers/scsi/pata_ali.c
===================================================================
--- work.orig/drivers/scsi/pata_ali.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_ali.c 2006-08-01 01:46:57.000000000 +0900
@@ -83,7 +83,7 @@ static int ali_c2_cable_detect(struct at
/* Host view cable detect 0x4A bit 0 primary bit 1 secondary
Bit set for 40 pin */
pci_read_config_byte(pdev, 0x4A, &ata66);
- if (ata66 & (1 << ap->hard_port_no))
+ if (ata66 & (1 << ap->port_no))
return ATA_CBL_PATA40;
else
return ATA_CBL_PATA80;
@@ -177,7 +177,7 @@ static unsigned long ali_20_filter(const
static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int pio_fifo = 0x54 + ap->hard_port_no;
+ int pio_fifo = 0x54 + ap->port_no;
u8 fifo;
int shift = 4 * adev->devno;
@@ -208,10 +208,10 @@ static void ali_fifo_control(struct ata_
static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int cas = 0x58 + 4 * ap->hard_port_no; /* Command timing */
- int cbt = 0x59 + 4 * ap->hard_port_no; /* Command timing */
- int drwt = 0x5A + 4 * ap->hard_port_no + adev->devno; /* R/W timing */
- int udmat = 0x56 + ap->hard_port_no; /* UDMA timing */
+ int cas = 0x58 + 4 * ap->port_no; /* Command timing */
+ int cbt = 0x59 + 4 * ap->port_no; /* Command timing */
+ int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */
+ int udmat = 0x56 + ap->port_no; /* UDMA timing */
int shift = 4 * adev->devno;
u8 udma;
Index: work/drivers/scsi/pata_amd.c
===================================================================
--- work.orig/drivers/scsi/pata_amd.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_amd.c 2006-08-01 01:46:57.000000000 +0900
@@ -49,7 +49,7 @@ static void timing_setup(struct ata_port
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
struct ata_device *peer = ata_dev_pair(adev);
- int dn = ap->hard_port_no * 2 + adev->devno;
+ int dn = ap->port_no * 2 + adev->devno;
struct ata_timing at, apeer;
int T, UT;
const int amd_clock = 33333; /* KHz. */
@@ -137,14 +137,14 @@ static int amd_pre_reset(struct ata_port
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u8 ata66;
- if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
}
pci_read_config_byte(pdev, 0x42, &ata66);
- if (ata66 & bitmask[ap->hard_port_no])
+ if (ata66 & bitmask[ap->port_no])
ap->cbl = ATA_CBL_PATA80;
else
ap->cbl = ATA_CBL_PATA40;
@@ -167,7 +167,7 @@ static int amd_early_pre_reset(struct at
{ 0x40, 1, 0x01, 0x01 }
};
- if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -259,7 +259,7 @@ static int nv_pre_reset(struct ata_port
u16 udma;
pci_read_config_byte(pdev, 0x52, &ata66);
- if (ata66 & bitmask[ap->hard_port_no])
+ if (ata66 & bitmask[ap->port_no])
ap->cbl = ATA_CBL_PATA80;
else
ap->cbl = ATA_CBL_PATA40;
@@ -267,7 +267,7 @@ static int nv_pre_reset(struct ata_port
/* We now have to double check because the Nvidia boxes BIOS
doesn't always set the cable bits but does set mode bits */
- pci_read_config_word(pdev, 0x62 - 2 * ap->hard_port_no, &udma);
+ pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap);
Index: work/drivers/scsi/pata_artop.c
===================================================================
--- work.orig/drivers/scsi/pata_artop.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_artop.c 2006-08-01 01:46:57.000000000 +0900
@@ -47,7 +47,7 @@ static int artop6210_pre_reset(struct at
{ 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */
};
- if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -90,13 +90,13 @@ static int artop6260_pre_reset(struct at
u8 tmp;
/* Odd numbered device ids are the units with enable bits (the -R cards) */
- if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->hard_port_no])) {
+ if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
}
pci_read_config_byte(pdev, 0x49, &tmp);
- if (tmp & (1 >> ap->hard_port_no))
+ if (tmp & (1 >> ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
@@ -135,7 +135,7 @@ static void artop6260_error_handler(stru
static void artop6210_load_piomode(struct ata_port *ap, struct ata_device *adev, unsigned int pio)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int dn = adev->devno + 2 * ap->hard_port_no;
+ int dn = adev->devno + 2 * ap->port_no;
const u16 timing[2][5] = {
{ 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 },
{ 0x0700, 0x070A, 0x0708, 0x0403, 0x0401 }
@@ -162,7 +162,7 @@ static void artop6210_load_piomode(struc
static void artop6210_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int dn = adev->devno + 2 * ap->hard_port_no;
+ int dn = adev->devno + 2 * ap->port_no;
u8 ultra;
artop6210_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
@@ -189,7 +189,7 @@ static void artop6210_set_piomode(struct
static void artop6260_load_piomode (struct ata_port *ap, struct ata_device *adev, unsigned int pio)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int dn = adev->devno + 2 * ap->hard_port_no;
+ int dn = adev->devno + 2 * ap->port_no;
const u8 timing[2][5] = {
{ 0x00, 0x0A, 0x08, 0x33, 0x31 },
{ 0x70, 0x7A, 0x78, 0x43, 0x41 }
@@ -221,9 +221,9 @@ static void artop6260_set_piomode(struct
artop6260_load_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
/* Clear the UDMA mode bits (set_dmamode will redo this if needed) */
- pci_read_config_byte(pdev, 0x44 + ap->hard_port_no, &ultra);
+ pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra);
ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */
- pci_write_config_byte(pdev, 0x44 + ap->hard_port_no, ultra);
+ pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra);
}
/**
@@ -241,7 +241,7 @@ static void artop6210_set_dmamode (struc
{
unsigned int pio;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int dn = adev->devno + 2 * ap->hard_port_no;
+ int dn = adev->devno + 2 * ap->port_no;
u8 ultra;
if (adev->dma_mode == XFER_MW_DMA_0)
@@ -292,7 +292,7 @@ static void artop6260_set_dmamode (struc
artop6260_load_piomode(ap, adev, pio);
/* Add ultra DMA bits if in UDMA mode */
- pci_read_config_byte(pdev, 0x44 + ap->hard_port_no, &ultra);
+ pci_read_config_byte(pdev, 0x44 + ap->port_no, &ultra);
ultra &= ~(7 << (4 * adev->devno)); /* One nibble per drive */
if (adev->dma_mode >= XFER_UDMA_0) {
u8 mode = adev->dma_mode - XFER_UDMA_0 + 1 - clock;
@@ -300,7 +300,7 @@ static void artop6260_set_dmamode (struc
mode = 1;
ultra |= (mode << (4 * adev->devno));
}
- pci_write_config_byte(pdev, 0x44 + ap->hard_port_no, ultra);
+ pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra);
}
static struct scsi_host_template artop_sht = {
Index: work/drivers/scsi/pata_atiixp.c
===================================================================
--- work.orig/drivers/scsi/pata_atiixp.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_atiixp.c 2006-08-01 01:46:57.000000000 +0900
@@ -41,7 +41,7 @@ static int atiixp_pre_reset(struct ata_p
{ 0x48, 1, 0x08, 0x00 }
};
- if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -70,10 +70,10 @@ static void atiixp_set_pio_timing(struct
static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int dn = 2 * ap->hard_port_no + adev->devno;
+ int dn = 2 * ap->port_no + adev->devno;
/* Check this is correct - the order is odd in both drivers */
- int timing_shift = (16 * ap->hard_port_no) + 8 * (adev->devno ^ 1);
+ int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
u16 pio_mode_data, pio_timing_data;
pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
@@ -116,7 +116,7 @@ static void atiixp_set_dmamode(struct at
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
int dma = adev->dma_mode;
- int dn = 2 * ap->hard_port_no + adev->devno;
+ int dn = 2 * ap->port_no + adev->devno;
int wanted_pio;
if (adev->dma_mode >= XFER_UDMA_0) {
@@ -131,7 +131,7 @@ static void atiixp_set_dmamode(struct at
} else {
u16 mwdma_timing_data;
/* Check this is correct - the order is odd in both drivers */
- int timing_shift = (16 * ap->hard_port_no) + 8 * (adev->devno ^ 1);
+ int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
dma -= XFER_MW_DMA_0;
@@ -170,7 +170,7 @@ static void atiixp_bmdma_start(struct at
struct ata_device *adev = qc->dev;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int dn = (2 * ap->hard_port_no) + adev->devno;
+ int dn = (2 * ap->port_no) + adev->devno;
u16 tmp16;
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
@@ -194,7 +194,7 @@ static void atiixp_bmdma_stop(struct ata
{
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int dn = (2 * ap->hard_port_no) + qc->dev->devno;
+ int dn = (2 * ap->port_no) + qc->dev->devno;
u16 tmp16;
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
Index: work/drivers/scsi/pata_cmd64x.c
===================================================================
--- work.orig/drivers/scsi/pata_cmd64x.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_cmd64x.c 2006-08-01 01:46:57.000000000 +0900
@@ -88,7 +88,7 @@ static int cmd648_pre_reset(struct ata_p
/* Check cable detect bits */
pci_read_config_byte(pdev, BMIDECSR, &r);
- if (r & (1 << ap->hard_port_no))
+ if (r & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA80;
else
ap->cbl = ATA_CBL_PATA40;
@@ -133,15 +133,15 @@ static void cmd64x_set_piomode(struct at
{ DRWTIM2, DRWTIM3 }
};
- int arttim = arttim_port[ap->hard_port_no][adev->devno];
- int drwtim = drwtim_port[ap->hard_port_no][adev->devno];
+ int arttim = arttim_port[ap->port_no][adev->devno];
+ int drwtim = drwtim_port[ap->port_no][adev->devno];
if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
return;
}
- if (ap->hard_port_no) {
+ if (ap->port_no) {
/* Slave has shared address setup */
struct ata_device *pair = ata_dev_pair(adev);
@@ -206,8 +206,8 @@ static void cmd64x_set_dmamode(struct at
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u8 regU, regD;
- int pciU = UDIDETCR0 + 8 * ap->hard_port_no;
- int pciD = BMIDESR0 + 8 * ap->hard_port_no;
+ int pciU = UDIDETCR0 + 8 * ap->port_no;
+ int pciD = BMIDESR0 + 8 * ap->port_no;
int shift = 2 * adev->devno;
pci_read_config_byte(pdev, pciD, ®D);
@@ -239,8 +239,8 @@ static void cmd648_bmdma_stop(struct ata
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u8 dma_intr;
- int dma_reg = ap->hard_port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
- int dma_mask = ap->hard_port_no ? ARTTIM2 : CFR;
+ int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
+ int dma_mask = ap->port_no ? ARTTIM2 : CFR;
ata_bmdma_stop(qc);
Index: work/drivers/scsi/pata_cs5520.c
===================================================================
--- work.orig/drivers/scsi/pata_cs5520.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_cs5520.c 2006-08-01 01:46:57.000000000 +0900
@@ -75,16 +75,16 @@ static void cs5520_set_timings(struct at
pio -= XFER_PIO_0;
/* Channel command timing */
- pci_write_config_byte(pdev, 0x62 + ap->hard_port_no,
+ pci_write_config_byte(pdev, 0x62 + ap->port_no,
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
/* FIXME: should these use address ? */
/* Read command timing */
- pci_write_config_byte(pdev, 0x64 + 4*ap->hard_port_no + slave,
+ pci_write_config_byte(pdev, 0x64 + 4*ap->port_no + slave,
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
/* Write command timing */
- pci_write_config_byte(pdev, 0x66 + 4*ap->hard_port_no + slave,
+ pci_write_config_byte(pdev, 0x66 + 4*ap->port_no + slave,
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
}
@@ -261,7 +261,6 @@ static int __devinit cs5520_init_one(str
probe[1] = probe[0];
INIT_LIST_HEAD(&probe[1].node);
probe[1].irq = 15;
- probe[1].hard_port_no = 1;
probe[1].port[0].cmd_addr = 0x170;
probe[1].port[0].ctl_addr = 0x376;
probe[1].port[0].altstatus_addr = 0x376;
Index: work/drivers/scsi/pata_cs5530.c
===================================================================
--- work.orig/drivers/scsi/pata_cs5530.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_cs5530.c 2006-08-01 01:46:57.000000000 +0900
@@ -52,7 +52,7 @@ static void cs5530_set_piomode(struct at
{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
{0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
};
- unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->hard_port_no;
+ unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no;
u32 tuning;
int format;
@@ -79,7 +79,7 @@ static void cs5530_set_piomode(struct at
static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
- unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->hard_port_no;
+ unsigned long base = ( ap->ioaddr.bmdma_addr & ~0x0F) + 0x20 + 0x10 * ap->port_no;
u32 tuning, timing = 0;
u8 reg;
Index: work/drivers/scsi/pata_cypress.c
===================================================================
--- work.orig/drivers/scsi/pata_cypress.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_cypress.c 2006-08-01 01:46:57.000000000 +0900
@@ -109,7 +109,7 @@ static void cy82c693_set_piomode(struct
static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
- int reg = CY82_INDEX_CHANNEL0 + ap->hard_port_no;
+ int reg = CY82_INDEX_CHANNEL0 + ap->port_no;
/* Be afraid, be very afraid. Magic registers in low I/O space */
outb(reg, 0x22);
Index: work/drivers/scsi/pata_efar.c
===================================================================
--- work.orig/drivers/scsi/pata_efar.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_efar.c 2006-08-01 01:46:57.000000000 +0900
@@ -42,13 +42,13 @@ static int efar_pre_reset(struct ata_por
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u8 tmp;
- if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
}
pci_read_config_byte(pdev, 0x47, &tmp);
- if (tmp & (2 >> ap->hard_port_no))
+ if (tmp & (2 >> ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
@@ -83,7 +83,7 @@ static void efar_set_piomode (struct ata
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
- unsigned int idetm_port= ap->hard_port_no ? 0x42 : 0x40;
+ unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
u16 idetm_data;
int control = 0;
@@ -117,7 +117,7 @@ static void efar_set_piomode (struct ata
idetm_data |= (timings[pio][0] << 12) |
(timings[pio][1] << 8);
} else {
- int shift = 4 * ap->hard_port_no;
+ int shift = 4 * ap->port_no;
u8 slave_data;
idetm_data &= 0xCC0F;
@@ -148,10 +148,10 @@ static void efar_set_piomode (struct ata
static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
- u8 master_port = ap->hard_port_no ? 0x42 : 0x40;
+ u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
- int devid = adev->devno + 2 * ap->hard_port_no;
+ int devid = adev->devno + 2 * ap->port_no;
u8 udma_enable;
static const /* ISP RTC */
@@ -202,9 +202,9 @@ static void efar_set_dmamode (struct ata
master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
master_data |= control << 4;
pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= (0x0F + 0xE1 * ap->hard_port_no);
+ slave_data &= (0x0F + 0xE1 * ap->port_no);
/* Load the matching timing */
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->hard_port_no ? 4 : 0);
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
pci_write_config_byte(dev, 0x44, slave_data);
} else { /* Master */
master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
Index: work/drivers/scsi/pata_hpt366.c
===================================================================
--- work.orig/drivers/scsi/pata_hpt366.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_hpt366.c 2006-08-01 01:46:57.000000000 +0900
@@ -226,7 +226,7 @@ static int hpt36x_pre_reset(struct ata_p
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
pci_read_config_byte(pdev, 0x5A, &ata66);
- if (ata66 & (1 << ap->hard_port_no))
+ if (ata66 & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
@@ -261,8 +261,8 @@ static void hpt366_set_piomode(struct at
u32 mode;
u8 fast;
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->hard_port_no);
- addr2 = 0x51 + 4 * ap->hard_port_no;
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
@@ -296,8 +296,8 @@ static void hpt366_set_dmamode(struct at
u32 mode;
u8 fast;
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->hard_port_no);
- addr2 = 0x51 + 4 * ap->hard_port_no;
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
Index: work/drivers/scsi/pata_hpt37x.c
===================================================================
--- work.orig/drivers/scsi/pata_hpt37x.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_hpt37x.c 2006-08-01 01:46:57.000000000 +0900
@@ -461,7 +461,7 @@ static int hpt37x_pre_reset(struct ata_p
/* Restore state */
pci_write_config_byte(pdev, 0x5B, scr2);
- if (ata66 & (1 << ap->hard_port_no))
+ if (ata66 & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
@@ -505,7 +505,7 @@ static int hpt374_pre_reset(struct ata_p
pci_write_config_word(pdev, 0x52, mcr3);
pci_write_config_word(pdev, 0x56, mcr6);
- if (ata66 & (1 << ap->hard_port_no))
+ if (ata66 & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
@@ -553,8 +553,8 @@ static void hpt370_set_piomode(struct at
u32 mode;
u8 fast;
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->hard_port_no);
- addr2 = 0x51 + 4 * ap->hard_port_no;
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
@@ -587,8 +587,8 @@ static void hpt370_set_dmamode(struct at
u32 mode;
u8 fast;
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->hard_port_no);
- addr2 = 0x51 + 4 * ap->hard_port_no;
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
@@ -616,7 +616,7 @@ static void hpt370_bmdma_start(struct at
{
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- pci_write_config_byte(pdev, 0x50 + 4 * ap->hard_port_no, 0x37);
+ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(10);
ata_bmdma_start(qc);
}
@@ -642,7 +642,7 @@ static void hpt370_bmdma_stop(struct ata
}
if (dma_stat & 0x01) {
/* Clear the engine */
- pci_write_config_byte(pdev, 0x50 + 4 * ap->hard_port_no, 0x37);
+ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(10);
/* Stop DMA */
dma_cmd = inb(bmdma );
@@ -651,7 +651,7 @@ static void hpt370_bmdma_stop(struct ata
dma_stat = inb(bmdma + 2);
outb(dma_stat | 0x06 , bmdma + 2);
/* Clear the engine */
- pci_write_config_byte(pdev, 0x50 + 4 * ap->hard_port_no, 0x37);
+ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(10);
}
ata_bmdma_stop(qc);
@@ -673,8 +673,8 @@ static void hpt372_set_piomode(struct at
u32 mode;
u8 fast;
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->hard_port_no);
- addr2 = 0x51 + 4 * ap->hard_port_no;
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
@@ -708,8 +708,8 @@ static void hpt372_set_dmamode(struct at
u32 mode;
u8 fast;
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->hard_port_no);
- addr2 = 0x51 + 4 * ap->hard_port_no;
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
@@ -736,12 +736,12 @@ static void hpt37x_bmdma_stop(struct ata
{
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int mscreg = 0x50 + 2 * ap->hard_port_no;
+ int mscreg = 0x50 + 2 * ap->port_no;
u8 bwsr_stat, msc_stat;
pci_read_config_byte(pdev, 0x6A, &bwsr_stat);
pci_read_config_byte(pdev, mscreg, &msc_stat);
- if (bwsr_stat & (1 << ap->hard_port_no))
+ if (bwsr_stat & (1 << ap->port_no))
pci_write_config_byte(pdev, mscreg, msc_stat | 0x30);
ata_bmdma_stop(qc);
}
Index: work/drivers/scsi/pata_hpt3x2n.c
===================================================================
--- work.orig/drivers/scsi/pata_hpt3x2n.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_hpt3x2n.c 2006-08-01 01:46:57.000000000 +0900
@@ -134,7 +134,7 @@ static int hpt3xn_pre_reset(struct ata_p
/* Restore state */
pci_write_config_byte(pdev, 0x5B, scr2);
- if (ata66 & (1 << ap->hard_port_no))
+ if (ata66 & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
@@ -175,8 +175,8 @@ static void hpt3x2n_set_piomode(struct a
u32 mode;
u8 fast;
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->hard_port_no);
- addr2 = 0x51 + 4 * ap->hard_port_no;
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
@@ -208,8 +208,8 @@ static void hpt3x2n_set_dmamode(struct a
u32 mode;
u8 fast;
- addr1 = 0x40 + 4 * (adev->devno + 2 * ap->hard_port_no);
- addr2 = 0x51 + 4 * ap->hard_port_no;
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
/* Fast interrupt prediction disable, hold off interrupt disable */
pci_read_config_byte(pdev, addr2, &fast);
@@ -235,12 +235,12 @@ static void hpt3x2n_bmdma_stop(struct at
{
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int mscreg = 0x50 + 2 * ap->hard_port_no;
+ int mscreg = 0x50 + 2 * ap->port_no;
u8 bwsr_stat, msc_stat;
pci_read_config_byte(pdev, 0x6A, &bwsr_stat);
pci_read_config_byte(pdev, mscreg, &msc_stat);
- if (bwsr_stat & (1 << ap->hard_port_no))
+ if (bwsr_stat & (1 << ap->port_no))
pci_write_config_byte(pdev, mscreg, msc_stat | 0x30);
ata_bmdma_stop(qc);
}
@@ -290,7 +290,7 @@ static void hpt3x2n_set_clock(struct ata
static int hpt3x2n_pair_idle(struct ata_port *ap)
{
struct ata_host_set *host = ap->host_set;
- struct ata_port *pair = host->ports[ap->hard_port_no ^ 1];
+ struct ata_port *pair = host->ports[ap->port_no ^ 1];
if (pair->hsm_task_state == HSM_ST_IDLE)
return 1;
Index: work/drivers/scsi/pata_hpt3x3.c
===================================================================
--- work.orig/drivers/scsi/pata_hpt3x3.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_hpt3x3.c 2006-08-01 01:46:57.000000000 +0900
@@ -58,7 +58,7 @@ static void hpt3x3_set_piomode(struct at
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u32 r1, r2;
- int dn = 2 * ap->hard_port_no + adev->devno;
+ int dn = 2 * ap->port_no + adev->devno;
pci_read_config_dword(pdev, 0x44, &r1);
pci_read_config_dword(pdev, 0x48, &r2);
@@ -84,7 +84,7 @@ static void hpt3x3_set_dmamode(struct at
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u32 r1, r2;
- int dn = 2 * ap->hard_port_no + adev->devno;
+ int dn = 2 * ap->port_no + adev->devno;
int mode_num = adev->dma_mode & 0x0F;
pci_read_config_dword(pdev, 0x44, &r1);
Index: work/drivers/scsi/pata_it8172.c
===================================================================
--- work.orig/drivers/scsi/pata_it8172.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_it8172.c 2006-08-01 01:46:57.000000000 +0900
@@ -59,7 +59,7 @@ static int it8172_pre_reset(struct ata_p
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (ap->hard_port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->hard_port_no])) {
+ if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -146,7 +146,7 @@ static void it8172_set_piomode(struct at
static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int dn = (2 * ap->hard_port_no) + adev->devno;
+ int dn = (2 * ap->port_no) + adev->devno;
u8 reg48, reg4a;
int pio;
Index: work/drivers/scsi/pata_it821x.c
===================================================================
--- work.orig/drivers/scsi/pata_it821x.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_it821x.c 2006-08-01 01:46:57.000000000 +0900
@@ -152,7 +152,7 @@ static void it821x_program(struct ata_po
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
struct it821x_dev *itdev = ap->private_data;
- int channel = ap->hard_port_no;
+ int channel = ap->port_no;
u8 conf;
/* Program PIO/MWDMA timing bits */
@@ -180,7 +180,7 @@ static void it821x_program_udma(struct a
{
struct it821x_dev *itdev = ap->private_data;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int channel = ap->hard_port_no;
+ int channel = ap->port_no;
int unit = adev->devno;
u8 conf;
@@ -246,8 +246,8 @@ static void it821x_clock_strategy(struct
sel = 1;
}
pci_read_config_byte(pdev, 0x50, &v);
- v &= ~(1 << (1 + ap->hard_port_no));
- v |= sel << (1 + ap->hard_port_no);
+ v &= ~(1 << (1 + ap->port_no));
+ v |= sel << (1 + ap->port_no);
pci_write_config_byte(pdev, 0x50, v);
/*
@@ -316,7 +316,7 @@ static void it821x_passthru_set_dmamode(
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
struct it821x_dev *itdev = ap->private_data;
- int channel = ap->hard_port_no;
+ int channel = ap->port_no;
int unit = adev->devno;
u8 conf;
@@ -624,7 +624,7 @@ static int it821x_port_start(struct ata_
/* No ATAPI DMA in this mode either */
}
/* Pull the current clocks from 0x50 */
- if (conf & (1 << (1 + ap->hard_port_no)))
+ if (conf & (1 << (1 + ap->port_no)))
itdev->clock_mode = ATA_50;
else
itdev->clock_mode = ATA_66;
Index: work/drivers/scsi/pata_mpiix.c
===================================================================
--- work.orig/drivers/scsi/pata_mpiix.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_mpiix.c 2006-08-01 01:46:57.000000000 +0900
@@ -54,7 +54,7 @@ static int mpiix_pre_reset(struct ata_po
{ 0x6F, 1, 0x80, 0x80 }
};
- if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -233,7 +233,6 @@ static int mpiix_init_one(struct pci_dev
probe[0].irq_flags = SA_SHIRQ;
probe[0].host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
probe[0].legacy_mode = 1;
- probe[0].hard_port_no = 0;
probe[0].n_ports = 1;
probe[0].port[0].cmd_addr = 0x1F0;
probe[0].port[0].ctl_addr = 0x3F6;
@@ -245,7 +244,6 @@ static int mpiix_init_one(struct pci_dev
INIT_LIST_HEAD(&probe[1].node);
probe[1] = probe[0];
probe[1].irq = 15;
- probe[1].hard_port_no = 1;
probe[1].port[0].cmd_addr = 0x170;
probe[1].port[0].ctl_addr = 0x376;
probe[1].port[0].altstatus_addr = 0x376;
Index: work/drivers/scsi/pata_ns87410.c
===================================================================
--- work.orig/drivers/scsi/pata_ns87410.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_ns87410.c 2006-08-01 01:46:57.000000000 +0900
@@ -45,7 +45,7 @@ static int ns87410_pre_reset(struct ata_
{ 0x47, 1, 0x08, 0x08 }
};
- if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -80,7 +80,7 @@ static void ns87410_error_handler(struct
static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int port = 0x40 + 4 * ap->hard_port_no;
+ int port = 0x40 + 4 * ap->port_no;
u8 idetcr, idefr;
struct ata_timing at;
Index: work/drivers/scsi/pata_oldpiix.c
===================================================================
--- work.orig/drivers/scsi/pata_oldpiix.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_oldpiix.c 2006-08-01 01:46:57.000000000 +0900
@@ -42,7 +42,7 @@ static int oldpiix_pre_reset(struct ata_
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
};
- if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -80,7 +80,7 @@ static void oldpiix_set_piomode (struct
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
- unsigned int idetm_port= ap->hard_port_no ? 0x42 : 0x40;
+ unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
u16 idetm_data;
int control = 0;
@@ -140,7 +140,7 @@ static void oldpiix_set_piomode (struct
static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *dev = to_pci_dev(ap->host_set->dev);
- u8 idetm_port = ap->hard_port_no ? 0x42 : 0x40;
+ u8 idetm_port = ap->port_no ? 0x42 : 0x40;
u16 idetm_data;
static const /* ISP RTC */
Index: work/drivers/scsi/pata_opti.c
===================================================================
--- work.orig/drivers/scsi/pata_opti.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_opti.c 2006-08-01 01:46:57.000000000 +0900
@@ -59,7 +59,7 @@ static int opti_pre_reset(struct ata_por
{ 0x40, 1, 0x08, 0x00 }
};
- if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
Index: work/drivers/scsi/pata_optidma.c
===================================================================
--- work.orig/drivers/scsi/pata_optidma.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_optidma.c 2006-08-01 01:46:57.000000000 +0900
@@ -59,7 +59,7 @@ static int optidma_pre_reset(struct ata_
0x40, 1, 0x08, 0x00
};
- if (ap->hard_port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) {
+ if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -221,7 +221,7 @@ static void optiplus_set_mode(struct ata
u8 udcfg;
u8 udslave;
int dev2 = 2 * adev->devno;
- int unit = 2 * ap->hard_port_no + adev->devno;
+ int unit = 2 * ap->port_no + adev->devno;
int udma = mode - XFER_UDMA_0;
pci_read_config_byte(pdev, 0x44, &udcfg);
@@ -230,7 +230,7 @@ static void optiplus_set_mode(struct ata
optidma_set_mode(ap, adev, adev->dma_mode);
} else {
udcfg |= (1 << unit);
- if (ap->hard_port_no) {
+ if (ap->port_no) {
pci_read_config_byte(pdev, 0x45, &udslave);
udslave &= ~(0x03 << dev2);
udslave |= (udma << dev2);
@@ -334,7 +334,7 @@ static u8 optidma_make_bits43(struct ata
static void optidma_post_set_mode(struct ata_port *ap)
{
u8 r;
- int nybble = 4 * ap->hard_port_no;
+ int nybble = 4 * ap->port_no;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
pci_read_config_byte(pdev, 0x43, &r);
Index: work/drivers/scsi/pata_pdc202xx_old.c
===================================================================
--- work.orig/drivers/scsi/pata_pdc202xx_old.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_pdc202xx_old.c 2006-08-01 01:46:57.000000000 +0900
@@ -49,7 +49,7 @@ static int pdc2026x_pre_reset(struct ata
u16 cis;
pci_read_config_word(pdev, 0x50, &cis);
- if (cis & (1 << (10 + ap->hard_port_no)))
+ if (cis & (1 << (10 + ap->port_no)))
ap->cbl = ATA_CBL_PATA80;
else
ap->cbl = ATA_CBL_PATA40;
@@ -76,7 +76,7 @@ static void pdc2026x_error_handler(struc
static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int port = 0x60 + 4 * ap->hard_port_no + 2 * adev->devno;
+ int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
static u16 pio_timing[5] = {
0x0913, 0x050C , 0x0308, 0x0206, 0x0104
};
@@ -123,7 +123,7 @@ static void pdc_set_piomode(struct ata_p
static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int port = 0x60 + 4 * ap->hard_port_no + 2 * adev->devno;
+ int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
static u8 udma_timing[6][2] = {
{ 0x60, 0x03 }, /* 33 Mhz Clock */
{ 0x40, 0x02 },
@@ -168,11 +168,11 @@ static void pdc2026x_bmdma_start(struct
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
struct ata_taskfile *tf = &qc->tf;
- int sel66 = ap->hard_port_no ? 0x08: 0x02;
+ int sel66 = ap->port_no ? 0x08: 0x02;
unsigned long master = ap->host_set->ports[0]->ioaddr.bmdma_addr;
unsigned long clock = master + 0x11;
- unsigned long atapi_reg = master + 0x20 + (4 * ap->hard_port_no);
+ unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);
u32 len;
@@ -220,11 +220,11 @@ static void pdc2026x_bmdma_stop(struct a
struct ata_device *adev = qc->dev;
struct ata_taskfile *tf = &qc->tf;
- int sel66 = ap->hard_port_no ? 0x08: 0x02;
+ int sel66 = ap->port_no ? 0x08: 0x02;
/* The clock bits are in the same register for both channels */
unsigned long master = ap->host_set->ports[0]->ioaddr.bmdma_addr;
unsigned long clock = master + 0x11;
- unsigned long atapi_reg = master + 0x20 + (4 * ap->hard_port_no);
+ unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);
/* Cases the state machine will not complete correctly */
if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) {
Index: work/drivers/scsi/pata_sc1200.c
===================================================================
--- work.orig/drivers/scsi/pata_sc1200.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_sc1200.c 2006-08-01 01:46:57.000000000 +0900
@@ -95,7 +95,7 @@ static void sc1200_set_piomode(struct at
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u32 format;
- unsigned int reg = 0x40 + 0x10 * ap->hard_port_no;
+ unsigned int reg = 0x40 + 0x10 * ap->port_no;
int mode = adev->pio_mode - XFER_PIO_0;
pci_read_config_dword(pdev, reg + 4, &format);
@@ -130,7 +130,7 @@ static void sc1200_set_dmamode(struct at
int clock = sc1200_clock();
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- unsigned int reg = 0x40 + 0x10 * ap->hard_port_no;
+ unsigned int reg = 0x40 + 0x10 * ap->port_no;
int mode = adev->dma_mode;
u32 format;
Index: work/drivers/scsi/pata_serverworks.c
===================================================================
--- work.orig/drivers/scsi/pata_serverworks.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_serverworks.c 2006-08-01 01:46:57.000000000 +0900
@@ -68,7 +68,7 @@ static const char *csb_bad_ata100[] = {
static int dell_cable(struct ata_port *ap) {
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (pdev->subsystem_device & (1 << (ap->hard_port_no + 14)))
+ if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
return ATA_CBL_PATA80;
return ATA_CBL_PATA40;
}
@@ -85,7 +85,7 @@ static int dell_cable(struct ata_port *a
static int sun_cable(struct ata_port *ap) {
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (pdev->subsystem_device & (1 << (ap->hard_port_no + 14)))
+ if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
return ATA_CBL_PATA80;
return ATA_CBL_PATA40;
}
@@ -254,8 +254,8 @@ static unsigned long serverworks_csb_fil
static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
- int offset = 1 + (2 * ap->hard_port_no) - adev->devno;
- int devbits = (2 * ap->hard_port_no + adev->devno) * 4;
+ int offset = 1 + (2 * ap->port_no) - adev->devno;
+ int devbits = (2 * ap->port_no + adev->devno) * 4;
u16 csb5_pio;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
int pio = adev->pio_mode - XFER_PIO_0;
@@ -284,8 +284,8 @@ static void serverworks_set_piomode(stru
static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 dma_mode[] = { 0x77, 0x21, 0x20 };
- int offset = 1 + 2 * ap->hard_port_no - adev->devno;
- int devbits = (2 * ap->hard_port_no + adev->devno);
+ int offset = 1 + 2 * ap->port_no - adev->devno;
+ int devbits = (2 * ap->port_no + adev->devno);
u8 ultra;
u8 ultra_cfg;
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
@@ -295,11 +295,11 @@ static void serverworks_set_dmamode(stru
if (adev->dma_mode >= XFER_UDMA_0) {
pci_write_config_byte(pdev, 0x44 + offset, 0x20);
- pci_read_config_byte(pdev, 0x56 + ap->hard_port_no, &ultra);
- ultra &= ~(0x0F << (ap->hard_port_no * 4));
+ pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
+ ultra &= ~(0x0F << (ap->port_no * 4));
ultra |= (adev->dma_mode - XFER_UDMA_0)
- << (ap->hard_port_no * 4);
- pci_write_config_byte(pdev, 0x56 + ap->hard_port_no, ultra);
+ << (ap->port_no * 4);
+ pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
ultra_cfg |= (1 << devbits);
} else {
Index: work/drivers/scsi/pata_sil680.c
===================================================================
--- work.orig/drivers/scsi/pata_sil680.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_sil680.c 2006-08-01 01:46:57.000000000 +0900
@@ -49,7 +49,7 @@
static unsigned long sil680_selreg(struct ata_port *ap, int r)
{
unsigned long base = 0xA0 + r;
- base += (ap->hard_port_no << 4);
+ base += (ap->port_no << 4);
return base;
}
@@ -66,7 +66,7 @@ static unsigned long sil680_selreg(struc
static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
{
unsigned long base = 0xA0 + r;
- base += (ap->hard_port_no << 4);
+ base += (ap->port_no << 4);
base |= adev->devno ? 2 : 0;
return base;
}
@@ -180,7 +180,7 @@ static void sil680_set_dmamode(struct at
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
unsigned long ma = sil680_seldev(ap, adev, 0x08);
unsigned long ua = sil680_seldev(ap, adev, 0x0C);
- unsigned long addr_mask = 0x80 + 4 * ap->hard_port_no;
+ unsigned long addr_mask = 0x80 + 4 * ap->port_no;
int port_shift = adev->devno * 4;
u8 scsc, mode;
u16 multi, ultra;
Index: work/drivers/scsi/pata_sis.c
===================================================================
--- work.orig/drivers/scsi/pata_sis.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_sis.c 2006-08-01 01:46:57.000000000 +0900
@@ -53,7 +53,7 @@ struct sis_chipset {
static int sis_port_base(struct ata_device *adev)
{
- return 0x40 + (4 * adev->ap->hard_port_no) + (2 * adev->devno);
+ return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno);
}
/**
@@ -74,13 +74,13 @@ static int sis_133_pre_reset(struct ata_
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u16 tmp;
- if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
}
/* The top bit of this register is the cable detect bit */
- pci_read_config_word(pdev, 0x50 + 2 * ap->hard_port_no, &tmp);
+ pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
if (tmp & 0x8000)
ap->cbl = ATA_CBL_PATA40;
else
@@ -121,14 +121,14 @@ static int sis_66_pre_reset(struct ata_p
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u8 tmp;
- if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
}
/* Older chips keep cable detect in bits 4/5 of reg 0x48 */
pci_read_config_byte(pdev, 0x48, &tmp);
- tmp >>= ap->hard_port_no;
+ tmp >>= ap->port_no;
if (tmp & 0x10)
ap->cbl = ATA_CBL_PATA40;
else
@@ -167,7 +167,7 @@ static int sis_old_pre_reset(struct ata_
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -206,7 +206,7 @@ static void sis_set_fifo(struct ata_port
u8 fifoctrl;
u8 mask = 0x11;
- mask <<= (2 * ap->hard_port_no);
+ mask <<= (2 * ap->port_no);
mask <<= adev->devno;
/* This holds various bits including the FIFO control */
@@ -323,7 +323,7 @@ static void sis_133_set_piomode (struct
pci_read_config_dword(pdev, 0x54, ®54);
if (reg54 & 0x40000000)
port = 0x70;
- port += 8 * ap->hard_port_no + 4 * adev->devno;
+ port += 8 * ap->port_no + 4 * adev->devno;
pci_read_config_dword(pdev, port, &t1);
t1 &= 0xC0C00FFF; /* Mask out timing */
@@ -511,7 +511,7 @@ static void sis_133_set_dmamode (struct
pci_read_config_dword(pdev, 0x54, ®54);
if (reg54 & 0x40000000)
port = 0x70;
- port += (8 * ap->hard_port_no) + (4 * adev->devno);
+ port += (8 * ap->port_no) + (4 * adev->devno);
pci_read_config_dword(pdev, port, &t1);
Index: work/drivers/scsi/pata_sl82c105.c
===================================================================
--- work.orig/drivers/scsi/pata_sl82c105.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_sl82c105.c 2006-08-01 01:46:57.000000000 +0900
@@ -49,7 +49,7 @@ static int sl82c105_pre_reset(struct ata
};
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (ap->hard_port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->hard_port_no])) {
+ if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) {
ata_port_disable(ap);
dev_printk(KERN_INFO, &pdev->dev, "port disabled. ignoring.\n");
return 0;
@@ -83,7 +83,7 @@ static void sl82c105_configure_piomode(s
0x50D, 0x407, 0x304, 0x242, 0x240
};
u16 dummy;
- int timing = 0x44 + (8 * ap->hard_port_no) + (4 * adev->devno);
+ int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno);
pci_write_config_word(pdev, timing, pio_timing[pio]);
/* Can we lose this oddity of the old driver */
@@ -120,7 +120,7 @@ static void sl82c105_configure_dmamode(s
0x707, 0x201, 0x200
};
u16 dummy;
- int timing = 0x44 + (8 * ap->hard_port_no) + (4 * adev->devno);
+ int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno);
int dma = adev->dma_mode - XFER_MW_DMA_0;
pci_write_config_word(pdev, timing, dma_timing[dma]);
Index: work/drivers/scsi/pata_triflex.c
===================================================================
--- work.orig/drivers/scsi/pata_triflex.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_triflex.c 2006-08-01 01:46:57.000000000 +0900
@@ -61,7 +61,7 @@ static int triflex_probe_init(struct ata
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -94,7 +94,7 @@ static void triflex_load_timing(struct a
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
u32 timing = 0;
u32 triflex_timing, old_triflex_timing;
- int channel_offset = ap->hard_port_no ? 0x74: 0x70;
+ int channel_offset = ap->port_no ? 0x74: 0x70;
unsigned int is_slave = (adev->devno != 0);
Index: work/drivers/scsi/pata_via.c
===================================================================
--- work.orig/drivers/scsi/pata_via.c 2006-08-01 01:46:56.000000000 +0900
+++ work/drivers/scsi/pata_via.c 2006-08-01 01:46:57.000000000 +0900
@@ -137,7 +137,7 @@ static int via_cable_detect(struct ata_p
pci_read_config_dword(pdev, 0x50, &ata66);
/* Check both the drive cable reporting bits, we might not have
two drives */
- if (ata66 & (0x10100000 >> (16 * ap->hard_port_no)))
+ if (ata66 & (0x10100000 >> (16 * ap->port_no)))
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
@@ -155,7 +155,7 @@ static int via_pre_reset(struct ata_port
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- if (!pci_test_config_bits(pdev, &via_enable_bits[ap->hard_port_no])) {
+ if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
return 0;
@@ -207,7 +207,7 @@ static void via_do_set_mode(struct ata_p
unsigned long T = 1000000000 / via_clock;
unsigned long UT = T/tdiv;
int ut;
- int offset = 3 - (2*ap->hard_port_no) - adev->devno;
+ int offset = 3 - (2*ap->port_no) - adev->devno;
/* Calculate the timing values we require */
@@ -233,7 +233,7 @@ static void via_do_set_mode(struct ata_p
}
/* Load the PIO mode bits */
- pci_write_config_byte(pdev, 0x4F - ap->hard_port_no,
+ pci_write_config_byte(pdev, 0x4F - ap->port_no,
((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
pci_write_config_byte(pdev, 0x48 + offset,
((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
Index: work/include/linux/libata.h
===================================================================
--- work.orig/include/linux/libata.h 2006-08-01 01:46:56.000000000 +0900
+++ work/include/linux/libata.h 2006-08-01 01:46:57.000000000 +0900
@@ -350,7 +350,6 @@ struct ata_probe_ent {
struct scsi_host_template *sht;
struct ata_ioports port[ATA_MAX_PORTS];
unsigned int n_ports;
- unsigned int hard_port_no;
unsigned int pio_mask;
unsigned int mwdma_mask;
unsigned int udma_mask;
@@ -507,7 +506,6 @@ struct ata_port {
unsigned int pflags; /* ATA_PFLAG_xxx */
unsigned int id; /* unique id req'd by scsi midlyr */
unsigned int port_no; /* unique port #; from zero */
- unsigned int hard_port_no; /* hardware port #; from zero */
struct ata_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists