[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20060730220530.a2818547.rdunlap@xenotime.net>
Date: Sun, 30 Jul 2006 22:05:30 -0700
From: "Randy.Dunlap" <rdunlap@...otime.net>
To: Rubens Ramos <rubensr@...ernode.on.net>
Cc: linux-kernel@...r.kernel.org, Markus.Lidel@...dowconnect.com
Subject: Re: block-osm: NULL reply received (Promise SX6000) on 2.6.17 (was
working on 2.6.16)
On Sun, 30 Jul 2006 16:14:16 +0930 Rubens Ramos wrote:
> Hello,
>
> 1. Full description
> -------------------
> I've got a Fedora Core 5 system, which had the 2.6.16 kernel working
> without any problems (disks were identified without any issues), until
> the kernel was upgraded to 2.6.17. I can still boot using the old
> kernel, so I was hoping to get some help from the list.
>
> Basically, when I boot the server with 2.6.17, I get only the first
> initial kernel messages (just about 5 lines) indicating that the logical
> volumes are being detected, and then:
>
> block-osm: NULL reply received!
>
> the kernel freezes, and I need to reboot.
>
> (Please note I haven't subscribed to the list yet as I am not sure
> it would be necessary - let me know otherwise)
>
> Detailed information below as per kernel.org bug submission
> instructions.
>
> Thanks in advance
> Rubens
>
> 2. Keywords
> -----------
> SCSI, i2o, SX6000, Adaptec, Promise
>
> 4. Kernel Version
> -----------------
> Works: 2.6.16-1.2133
> Do not work: 2.6.17-1.2139, 2.6.17-1.2157
Can you also test a current 2.6.18-rc2 kernel and let us know
how that works (or not) please?
There should have been a warning message just before this one,
like:
block-osm: context id <foo> not found
Was there anything before your reported message?
> 5. Output of Oops
> -----------------
> block-osm: NULL reply received!
> (this is all I get)
>
> 6. A small example
> ------------------
> All I have to do is boot using 2.6.17
>
> 7. Environment
> --------------
> [root@...iter rfernandes]# cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 11
> model name : Intel(R) Pentium(R) III CPU family 1266MHz
> stepping : 1
> cpu MHz : 1267.384
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca
> cmov pat pse36 mmx fxsr sse
> bogomips : 2538.40
>
> [root@...iter rfernandes]# cat /proc/modules
> nls_utf8 2241 1 - Live 0xf88fe000
> cifs 197357 1 - Live 0xf8f92000
> autofs4 19141 1 - Live 0xf8d9f000
> hidp 16065 2 - Live 0xf8daa000
> rfcomm 34901 0 - Live 0xf8f4b000
> l2cap 23617 10 hidp,rfcomm, Live 0xf8dc5000
> bluetooth 44709 5 hidp,rfcomm,l2cap, Live 0xf8db9000
> sunrpc 139389 1 - Live 0xf8dd1000
> video 15173 0 - Live 0xf8da5000
> button 6609 0 - Live 0xf88a1000
> battery 9285 0 - Live 0xf8d87000
> ac 4933 0 - Live 0xf88fb000
> ipv6 225825 24 - Live 0xf8e19000
> lp 12169 0 - Live 0xf8d35000
> parport_pc 25573 1 - Live 0xf8d59000
> parport 34569 2 lp,parport_pc, Live 0xf8d46000
> floppy 57733 0 - Live 0xf8d8f000
> nvram 8393 0 - Live 0xf8d31000
> uhci_hcd 29393 0 - Live 0xf8d50000
> via_ircc 19541 0 - Live 0xf8d40000
> irda 105721 1 via_ircc, Live 0xf8d62000
> 8139cp 21441 0 - Live 0xf8d39000
> crc_ccitt 2241 1 irda, Live 0xf889f000
> e100 33221 0 - Live 0xf8d1f000
> 8139too 25537 0 - Live 0xf8d29000
> i2c_viapro 8277 0 - Live 0xf887c000
> mii 5441 3 8139cp,e100,8139too, Live 0xf8879000
> i2c_core 21057 1 i2c_viapro, Live 0xf88f4000
> dm_snapshot 16493 0 - Live 0xf8899000
> dm_zero 2113 0 - Live 0xf8840000
> dm_mirror 20625 0 - Live 0xf8881000
> dm_mod 51929 6 dm_snapshot,dm_zero,dm_mirror, Live 0xf88c5000
> ext3 116681 2 - Live 0xf8d01000
> jbd 52821 1 ext3, Live 0xf888b000
> i2o_block 12621 3 - Live 0xf8845000
> i2o_core 38757 1 i2o_block, Live 0xf884e000
> aic7xxx 129525 0 - Live 0xf88a4000
> scsi_transport_spi 21185 1 aic7xxx, Live 0xf8831000
> sd_mod 16449 0 - Live 0xf8838000
> scsi_mod 126185 3 aic7xxx,scsi_transport_spi,sd_mod, Live 0xf8859000
>
> [root@...iter rfernandes]# cat /proc/ioports
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 02f8-02ff : serial
> 0376-0376 : ide1
> 0378-037a : parport0
> 037b-037f : parport0
> 03c0-03df : vga+
> 03f8-03ff : serial
> 04d0-04d1 : pnp 00:0b
> 0cf8-0cff : PCI conf1
> 0e00-0e7e : pnp 00:0b
> 2000-200f : motherboard
> 2000-200f : pnp 00:0b
> 2000-2007 : vt596_smbus
> 7000-7fff : PCI Bus #02
> 7000-7007 : 0000:02:00.0
> 7040-7043 : 0000:02:00.0
> 7080-7087 : 0000:02:00.0
> 70c0-70c3 : 0000:02:00.0
> 7400-740f : 0000:02:00.0
> 7440-7447 : 0000:02:01.0
> 7480-7483 : 0000:02:01.0
> 74c0-74c7 : 0000:02:01.0
> 7800-7803 : 0000:02:01.0
> 7840-784f : 0000:02:01.0
> 7880-7887 : 0000:02:02.0
> 78c0-78c3 : 0000:02:02.0
> 7c00-7c07 : 0000:02:02.0
> 7c40-7c43 : 0000:02:02.0
> 7c80-7c8f : 0000:02:02.0
> 8000-8fff : PCI Bus #01
> 8000-80ff : 0000:01:00.0
> 9000-90ff : 0000:00:0a.0
> 9000-90ff : 8139too
> 9400-94ff : 0000:00:0d.0
> 9800-98ff : 0000:00:0d.1
> 9c80-9cbf : 0000:00:0e.0
> 9c80-9cbf : e100
> a000-a01f : 0000:00:11.2
> a000-a01f : uhci_hcd
> a040-a04f : 0000:00:11.1
> a040-a047 : ide0
> a048-a04f : ide1
> f000-f09e : motherboard
> f000-f003 : PM1a_EVT_BLK
> f004-f005 : PM1a_CNT_BLK
> f008-f00b : PM_TMR
> f020-f023 : GPE0_BLK
>
> [root@...iter rfernandes]# cat /proc/iomem
> 00000000-0009fbff : System RAM
> 00000000-00000000 : Crash kernel
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000c8000-000cbfff : Adapter ROM
> 000e0000-000e07ff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-3ffeffff : System RAM
> 00100000-002e5daf : Kernel code
> 002e5db0-003a7503 : Kernel data
> 3fff0000-3fff7fff : ACPI Tables
> 3fff8000-3fffffff : ACPI Non-volatile Storage
> 80100000-801fffff : PCI Bus #02
> 80100000-80103fff : 0000:02:00.0
> 80104000-80107fff : 0000:02:01.0
> 80108000-8010bfff : 0000:02:02.0
> 80200000-820fffff : PCI Bus #01
> 80200000-80200fff : 0000:01:00.0
> 80220000-8023ffff : 0000:01:00.0
> 81000000-81ffffff : 0000:01:00.0
> 82100000-821000ff : 0000:00:0a.0
> 82100000-821000ff : 8139too
> 82101000-82101fff : 0000:00:0d.0
> 82101000-82101fff : aic7xxx
> 82102000-82102fff : 0000:00:0d.1
> 82102000-82102fff : aic7xxx
> 82120000-8212ffff : 0000:00:0b.1
> 82140000-8215ffff : 0000:00:0d.0
> 82160000-8217ffff : 0000:00:0d.1
> 82400000-827fffff : 0000:00:0b.1
> 82400000-827fffff : I2O-subsystem
> 82900000-82900fff : 0000:00:0e.0
> 82900000-82900fff : e100
> 82920000-8293ffff : 0000:00:0e.0
> 82920000-8293ffff : e100
> 82940000-8294ffff : 0000:00:0e.0
> e0000000-e3ffffff : 0000:00:00.0
> fff80000-ffffffff : reserved
>
>
> [root@...iter rfernandes]# /sbin/lspci -vvv
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8653 Host Bridge
> Subsystem: Acer Incorporated [ALI] Unknown device 0018
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 8
> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
> Rate=<none>
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00008000-00008fff
> Memory behind bridge: 80200000-820fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 9000 [size=256]
> Region 1: Memory at 82100000 (32-bit, non-prefetchable)
> [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1
> +,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0b.0 PCI bridge: Intel Corporation 80960RM [i960RM Bridge] (rev 02)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, Cache Line Size 08
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
> I/O behind bridge: 00007000-00007fff
> Memory behind bridge: 80100000-801fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 00:0b.1 I2O: Intel Corporation 80960RM [i960RM Microprocessor] (rev 02)
> (prog-if 01)
> Subsystem: Promise Technology, Inc. SuperTrak SX6000 I2O CPU
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, Cache Line Size 08
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at 82400000 (32-bit, prefetchable) [size=4M]
> Expansion ROM at 82120000 [disabled] [size=64K]
>
> 00:0d.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
> Subsystem: Acer Incorporated [ALI] Unknown device 2005
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (10000ns min, 6250ns max), Cache Line Size 08
> Interrupt: pin A routed to IRQ 16
> BIST result: 00
> Region 0: I/O ports at 9400 [disabled] [size=256]
> Region 1: Memory at 82101000 (64-bit, non-prefetchable)
> [size=4K]
> Expansion ROM at 82140000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0d.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
> Subsystem: Acer Incorporated [ALI] Unknown device 2005
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (10000ns min, 6250ns max), Cache Line Size 08
> Interrupt: pin B routed to IRQ 17
> BIST result: 00
> Region 0: I/O ports at 9800 [disabled] [size=256]
> Region 1: Memory at 82102000 (64-bit, non-prefetchable)
> [size=4K]
> Expansion ROM at 82160000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0e.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
> 100] (rev 0d)
> Subsystem: Acer Incorporated [ALI] Unknown device 0040
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (2000ns min, 14000ns max), Cache Line Size 08
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at 82900000 (32-bit, non-prefetchable)
> [size=4K]
> Region 1: I/O ports at 9c80 [size=64]
> Region 2: Memory at 82920000 (32-bit, non-prefetchable)
> [size=128K]
> Expansion ROM at 82940000 [disabled] [size=64K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1
> +,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
> Subsystem: Acer Incorporated [ALI] Unknown device 0018
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> (prog-if 8a [Master SecP PriP])
> Subsystem: Acer Incorporated [ALI] Unknown device 0018
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Region 4: I/O ports at a040 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 1b) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, Cache Line Size 08
> Interrupt: pin D routed to IRQ 17
> Region 4: I/O ports at a000 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP 2X
> (rev 27) (prog-if 00 [VGA])
> Subsystem: ATI Technologies Inc Unknown device 8008
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (2000ns min), Cache Line Size 08
> Interrupt: pin A routed to IRQ 9
> Region 0: Memory at 81000000 (32-bit, non-prefetchable)
> [size=16M]
> Region 1: I/O ports at 8000 [size=256]
> Region 2: Memory at 80200000 (32-bit, non-prefetchable)
> [size=4K]
> Expansion ROM at 80220000 [disabled] [size=128K]
> Capabilities: [50] AGP version 1.0
> Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3- Rate=x1,x2
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
> Rate=<none>
> Capabilities: [5c] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:00.0 RAID bus controller: Promise Technology, Inc. PDC20276
> (MBFastTrak133 Lite) (rev ff) (prog-if ff)
> !!! Unknown header type 7f
>
> 02:01.0 RAID bus controller: Promise Technology, Inc. PDC20276
> (MBFastTrak133 Lite) (rev ff) (prog-if ff)
> !!! Unknown header type 7f
>
> 02:02.0 RAID bus controller: Promise Technology, Inc. PDC20276
> (MBFastTrak133 Lite) (rev ff) (prog-if ff)
> !!! Unknown header type 7f
>
> [root@...iter rfernandes]#
>
> [root@...iter rfernandes]# cat /proc/scsi/scsi
> Attached devices:
---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists