Linux version 2.6.18-rc3-git3 (root@server) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Thu Aug 3 13:28:08 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable) BIOS-e820: 000000007ffe0000 - 000000007ffef000 (ACPI data) BIOS-e820: 000000007ffef000 - 000000007fffdc00 (ACPI NVS) BIOS-e820: 000000007fffdc00 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 524256 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294880 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f8370 ACPI: RSDT (v001 A M I OEMRSDT 0x09000520 MSFT 0x00000097) @ 0x7ffe0000 ACPI: FADT (v002 A M I OEMFACP 0x09000520 MSFT 0x00000097) @ 0x7ffe0200 ACPI: MADT (v001 A M I OEMAPIC 0x09000520 MSFT 0x00000097) @ 0x7ffe0390 ACPI: SPCR (v001 A M I OEMSPCR 0x09000520 MSFT 0x00000097) @ 0x7ffe0420 ACPI: MCFG (v001 A M I OEMMCFG 0x09000520 MSFT 0x00000097) @ 0x7ffe0470 ACPI: OEMB (v001 A M I AMI_OEM 0x09000520 MSFT 0x00000097) @ 0x7ffef040 ACPI: DSDT (v001 SBD2B SBD2B016 0x00000016 INTL 0x02002026) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Detected 3192.358 MHz processor. Built 1 zonelists. Total pages: 524256 Kernel command line: root=/dev/md1 ro nmi_watchdog=1 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec80000) mapped IOAPIC to ffffa000 (fec80400) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c04fb000 soft=c04f3000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2070156k/2097024k available (2512k kernel code, 25736k reserved, 887k data, 188k init, 1179520k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6388.63 BogoMIPS (lpj=12777275) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 16k freed ACPI: Core revision 20060707 CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 03 Booting processor 1/1 eip 2000 CPU 1 irqstacks, hard=c04fc000 soft=c04f4000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6384.44 BogoMIPS (lpj=12768892) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 03 Total of 2 processors activated (12773.08 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=1440 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:07:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPC0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *5) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:01:00.0 IO window: b000-bfff MEM window: fcd00000-fcdfffff PREFETCH window: fa000000-faffffff PCI: Bridge: 0000:01:00.2 IO window: c000-cfff MEM window: fce00000-fcefffff PREFETCH window: fb000000-fb7fffff PCI: Bridge: 0000:00:02.0 IO window: b000-cfff MEM window: fcc00000-fcefffff PREFETCH window: fa000000-fb7fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: d000-dfff MEM window: fcf00000-fcffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: e000-efff MEM window: fd000000-febfffff PREFETCH window: fb800000-fbffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Setting latency timer of device 0000:01:00.2 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with large block numbers, no debug enabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 Allocate Port Service[0000:00:04.0:pcie00] PCI: Setting latency timer of device 0000:00:05.0 to 64 Allocate Port Service[0000:00:05.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 Allocate Port Service[0000:00:06.0:pcie00] Real Time Clock Driver v1.12ac i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0) ipmi message handler version 39.0 ipmi device interface IPMI System Interface driver. ipmi_si: Unable to find any System Interface(s) IPMI Watchdog: driver initialized Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 16 (level, low) -> IRQ 169 e1000: 0000:07:04.0: e1000_probe: (PCI:33MHz:32-bit) 00:04:23:bf:d9:62 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 28 (level, low) -> IRQ 177 3w-9xxx: scsi0: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:. 3w-9xxx: scsi0: AEN: WARNING (0x04:0x0042): Primary DCB read error occurred:port=5, error=0x208. scsi0 : 3ware 9000 Storage Controller 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfcdffc00, IRQ: 177. 3w-9xxx: scsi0: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 12. Vendor: AMCC Model: 9500S-12MI DISK Rev: 2.06 Type: Direct-Access ANSI SCSI revision: 03 Vendor: AMCC Model: 9500S-12MI DISK Rev: 2.06 Type: Direct-Access ANSI SCSI revision: 03 Vendor: AMCC Model: 9500S-12MI DISK Rev: 2.06 Type: Direct-Access ANSI SCSI revision: 03 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 24 (level, low) -> IRQ 185 scsi1 : 3ware 9000 Storage Controller 3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xfcdff800, IRQ: 185. 3w-9xxx: scsi1: Firmware FE9X 2.02.00.008, BIOS BE9X 2.02.01.037, Ports: 12. Vendor: 3ware Model: Logical Disk 00 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 01 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 02 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 03 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 Vendor: 3ware Model: Logical Disk 04 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 193 3w-9xxx: scsi2: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:. scsi2 : 3ware 9000 Storage Controller 3w-9xxx: scsi2: Found a 3ware 9000 Storage Controller at 0xfceffc00, IRQ: 193. 3w-9xxx: scsi2: Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047, Ports: 8. Vendor: 3ware Model: Logical Disk 00 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 201 3w-9xxx: scsi3: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:. scsi3 : 3ware 9000 Storage Controller 3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller at 0xfebdbc00, IRQ: 201. 3w-9xxx: scsi3: Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047, Ports: 8. Vendor: 3ware Model: Logical Disk 00 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA000 irq 201 ata2: SATA max UDMA/133 cmd 0xA400 ctl 0xA082 bmdma 0xA008 irq 201 scsi4 : ata_piix ata1.00: ATA-6, max UDMA/133, 390721968 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi5 : ata_piix ata2.00: ATA-6, max UDMA/133, 390721968 sectors: LBA48 ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 Vendor: ATA Model: ST3200822AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3200822AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 976541696 512-byte hdwr sectors (499989 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 SCSI device sda: drive cache: write back, no read (daft) SCSI device sda: 976541696 512-byte hdwr sectors (499989 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 SCSI device sda: drive cache: write back, no read (daft) sda: unknown partition table sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 976541696 512-byte hdwr sectors (499989 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 SCSI device sdb: drive cache: write back, no read (daft) SCSI device sdb: 976541696 512-byte hdwr sectors (499989 MB) sdb: Write Protect is off sdb: Mode Sense: 23 00 00 00 SCSI device sdb: drive cache: write back, no read (daft) sdb: unknown partition table sd 0:0:1:0: Attached scsi disk sdb SCSI device sdc: 976541696 512-byte hdwr sectors (499989 MB) sdc: Write Protect is off sdc: Mode Sense: 23 00 00 00 SCSI device sdc: drive cache: write back, no read (daft) SCSI device sdc: 976541696 512-byte hdwr sectors (499989 MB) sdc: Write Protect is off sdc: Mode Sense: 23 00 00 00 SCSI device sdc: drive cache: write back, no read (daft) sdc: unknown partition table sd 0:0:2:0: Attached scsi disk sdc SCSI device sdd: 781228032 512-byte hdwr sectors (399989 MB) sdd: Write Protect is off sdd: Mode Sense: 23 00 00 00 SCSI device sdd: drive cache: none SCSI device sdd: 781228032 512-byte hdwr sectors (399989 MB) sdd: Write Protect is off sdd: Mode Sense: 23 00 00 00 SCSI device sdd: drive cache: none sdd: unknown partition table sd 1:0:0:0: Attached scsi disk sdd SCSI device sde: 976541696 512-byte hdwr sectors (499989 MB) sde: Write Protect is off sde: Mode Sense: 23 00 00 00 SCSI device sde: drive cache: none SCSI device sde: 976541696 512-byte hdwr sectors (499989 MB) sde: Write Protect is off sde: Mode Sense: 23 00 00 00 SCSI device sde: drive cache: none sde: unknown partition table sd 1:0:1:0: Attached scsi disk sde SCSI device sdf: 976541696 512-byte hdwr sectors (499989 MB) sdf: Write Protect is off sdf: Mode Sense: 23 00 00 00 SCSI device sdf: drive cache: none SCSI device sdf: 976541696 512-byte hdwr sectors (499989 MB) sdf: Write Protect is off sdf: Mode Sense: 23 00 00 00 SCSI device sdf: drive cache: none sdf: unknown partition table sd 1:0:2:0: Attached scsi disk sdf SCSI device sdg: 976541696 512-byte hdwr sectors (499989 MB) sdg: Write Protect is off sdg: Mode Sense: 23 00 00 00 SCSI device sdg: drive cache: none SCSI device sdg: 976541696 512-byte hdwr sectors (499989 MB) sdg: Write Protect is off sdg: Mode Sense: 23 00 00 00 SCSI device sdg: drive cache: none sdg: unknown partition table sd 1:0:3:0: Attached scsi disk sdg SCSI device sdh: 976541696 512-byte hdwr sectors (499989 MB) sdh: Write Protect is off sdh: Mode Sense: 23 00 00 00 SCSI device sdh: drive cache: none SCSI device sdh: 976541696 512-byte hdwr sectors (499989 MB) sdh: Write Protect is off sdh: Mode Sense: 23 00 00 00 SCSI device sdh: drive cache: none sdh: unknown partition table sd 1:0:4:0: Attached scsi disk sdh sdi : very big device. try to use READ CAPACITY(16). SCSI device sdi: 5468596224 512-byte hdwr sectors (2799921 MB) sdi: Write Protect is off sdi: Mode Sense: 23 00 00 00 SCSI device sdi: drive cache: write back, no read (daft) sdi : very big device. try to use READ CAPACITY(16). SCSI device sdi: 5468596224 512-byte hdwr sectors (2799921 MB) sdi: Write Protect is off sdi: Mode Sense: 23 00 00 00 SCSI device sdi: drive cache: write back, no read (daft) sdi: unknown partition table sd 2:0:0:0: Attached scsi disk sdi SCSI device sdj: 1953083392 512-byte hdwr sectors (999979 MB) sdj: Write Protect is off sdj: Mode Sense: 23 00 00 00 SCSI device sdj: drive cache: write back, no read (daft) SCSI device sdj: 1953083392 512-byte hdwr sectors (999979 MB) sdj: Write Protect is off sdj: Mode Sense: 23 00 00 00 SCSI device sdj: drive cache: write back, no read (daft) sdj: unknown partition table sd 3:0:0:0: Attached scsi disk sdj SCSI device sdk: 390721968 512-byte hdwr sectors (200050 MB) sdk: Write Protect is off sdk: Mode Sense: 00 3a 00 00 SCSI device sdk: drive cache: write back SCSI device sdk: 390721968 512-byte hdwr sectors (200050 MB) sdk: Write Protect is off sdk: Mode Sense: 00 3a 00 00 SCSI device sdk: drive cache: write back sdk: sdk1 sdk2 sdk3 sd 4:0:0:0: Attached scsi disk sdk SCSI device sdl: 390721968 512-byte hdwr sectors (200050 MB) sdl: Write Protect is off sdl: Mode Sense: 00 3a 00 00 SCSI device sdl: drive cache: write back SCSI device sdl: 390721968 512-byte hdwr sectors (200050 MB) sdl: Write Protect is off sdl: Mode Sense: 00 3a 00 00 SCSI device sdl: drive cache: write back sdl: sdl1 sdl2 sdl3 sd 5:0:0:0: Attached scsi disk sdl sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 sd 0:0:2:0: Attached scsi generic sg2 type 0 sd 1:0:0:0: Attached scsi generic sg3 type 0 sd 1:0:1:0: Attached scsi generic sg4 type 0 sd 1:0:2:0: Attached scsi generic sg5 type 0 sd 1:0:3:0: Attached scsi generic sg6 type 0 sd 1:0:4:0: Attached scsi generic sg7 type 0 sd 2:0:0:0: Attached scsi generic sg8 type 0 sd 3:0:0:0: Attached scsi generic sg9 type 0 sd 4:0:0:0: Attached scsi generic sg10 type 0 sd 5:0:0:0: Attached scsi generic sg11 type 0 usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 209, io mem 0xfcbfec00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000a880 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000ac00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 201, io base 0x0000ac80 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 225 md: raid1 personality registered for level 1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.0.1 Aug 3 2006 EDAC e752x: tolm = 80000, remapbase = ffc000, remaplimit = 0 EDAC MC0: Giving out device to e752x_edac E7520: DEV 0000:00:00.0 ip_conntrack version 2.4 (8192 buckets, 65536 max) - 172 bytes per conntrack input: AT Translated Set 2 keyboard as /class/input/input0 ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller Testing NMI watchdog ... OK. Starting balanced_irq Using IPI Shortcut mode md: Autodetecting RAID arrays. Time: tsc clocksource has been installed. md: autorun ... md: considering sdl3 ... md: adding sdl3 ... md: sdl2 has different UUID to sdl3 md: sdl1 has different UUID to sdl3 md: adding sdk3 ... md: sdk2 has different UUID to sdl3 md: sdk1 has different UUID to sdl3 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdl2 ... md: adding sdl2 ... md: sdl1 has different UUID to sdl2 md: adding sdk2 ... md: sdk1 has different UUID to sdl2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdl1 ... md: adding sdl1 ... md: adding sdk1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. Filesystem "md1": Disabling barriers, not supported by the underlying device XFS mounting filesystem md1 Ending clean XFS mount for filesystem: md1 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 188k freed Filesystem "md1": Disabling barriers, not supported by the underlying device kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Filesystem "dm-0": Disabling barriers, not supported by the underlying device XFS mounting filesystem dm-0 Ending clean XFS mount for filesystem: dm-0 Filesystem "dm-31": Disabling barriers, not supported with external log device XFS mounting filesystem dm-31 Ending clean XFS mount for filesystem: dm-31 Filesystem "dm-32": Disabling barriers, not supported with external log device XFS mounting filesystem dm-32 Ending clean XFS mount for filesystem: dm-32 Filesystem "dm-33": Disabling barriers, not supported with external log device XFS mounting filesystem dm-33 Ending clean XFS mount for filesystem: dm-33 Filesystem "dm-34": Disabling barriers, not supported with external log device XFS mounting filesystem dm-34 Ending clean XFS mount for filesystem: dm-34 Filesystem "dm-35": Disabling barriers, not supported with external log device XFS mounting filesystem dm-35 Ending clean XFS mount for filesystem: dm-35 Filesystem "dm-38": Disabling barriers, not supported with external log device XFS mounting filesystem dm-38 Ending clean XFS mount for filesystem: dm-38 Filesystem "dm-39": Disabling barriers, not supported with external log device XFS mounting filesystem dm-39 Ending clean XFS mount for filesystem: dm-39 Filesystem "dm-40": Disabling barriers, not supported with external log device XFS mounting filesystem dm-40 Ending clean XFS mount for filesystem: dm-40 Filesystem "dm-41": Disabling barriers, not supported with external log device XFS mounting filesystem dm-41 Ending clean XFS mount for filesystem: dm-41 Filesystem "dm-42": Disabling barriers, not supported with external log device XFS mounting filesystem dm-42 Ending clean XFS mount for filesystem: dm-42 Filesystem "dm-43": Disabling barriers, not supported with external log device XFS mounting filesystem dm-43 Ending clean XFS mount for filesystem: dm-43 Filesystem "dm-44": Disabling barriers, not supported with external log device XFS mounting filesystem dm-44 Ending clean XFS mount for filesystem: dm-44 Filesystem "dm-45": Disabling barriers, not supported with external log device XFS mounting filesystem dm-45 Ending clean XFS mount for filesystem: dm-45 Filesystem "dm-46": Disabling barriers, not supported with external log device XFS mounting filesystem dm-46 Ending clean XFS mount for filesystem: dm-46 Filesystem "dm-48": Disabling barriers, not supported with external log device XFS mounting filesystem dm-48 Ending clean XFS mount for filesystem: dm-48 Filesystem "dm-49": Disabling barriers, not supported with external log device XFS mounting filesystem dm-49 Ending clean XFS mount for filesystem: dm-49 Filesystem "dm-51": Disabling barriers, not supported with external log device XFS mounting filesystem dm-51 Ending clean XFS mount for filesystem: dm-51 Filesystem "dm-53": Disabling barriers, not supported with external log device XFS mounting filesystem dm-53 Ending clean XFS mount for filesystem: dm-53 Filesystem "dm-57": Disabling barriers, not supported with external log device XFS mounting filesystem dm-57 Ending clean XFS mount for filesystem: dm-57 Filesystem "dm-58": Disabling barriers, not supported with external log device XFS mounting filesystem dm-58 Ending clean XFS mount for filesystem: dm-58 Filesystem "dm-59": Disabling barriers, not supported with external log device XFS mounting filesystem dm-59 Ending clean XFS mount for filesystem: dm-59 Filesystem "dm-47": Disabling barriers, not supported with external log device XFS mounting filesystem dm-47 Ending clean XFS mount for filesystem: dm-47 Filesystem "dm-52": Disabling barriers, not supported with external log device XFS mounting filesystem dm-52 Ending clean XFS mount for filesystem: dm-52 Filesystem "dm-54": Disabling barriers, not supported with external log device XFS mounting filesystem dm-54 Ending clean XFS mount for filesystem: dm-54 Filesystem "dm-56": Disabling barriers, not supported with external log device XFS mounting filesystem dm-56 Ending clean XFS mount for filesystem: dm-56 Filesystem "dm-36": Disabling barriers, not supported with external log device XFS mounting filesystem dm-36 Ending clean XFS mount for filesystem: dm-36 Filesystem "dm-37": Disabling barriers, not supported with external log device XFS mounting filesystem dm-37 Ending clean XFS mount for filesystem: dm-37 Filesystem "dm-50": Disabling barriers, not supported with external log device XFS mounting filesystem dm-50 Ending clean XFS mount for filesystem: dm-50 Filesystem "dm-55": Disabling barriers, not supported by the underlying device XFS mounting filesystem dm-55 Ending clean XFS mount for filesystem: dm-55 Adding 2097144k swap on /dev/Log/Swap. Priority:-1 extents:1 across:2097144k Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:05:00.0 to 64 sky2 v1.5 addr 0xfcffc000 irq 169 Yukon-EC (0xb6) rev 2 sky2 eth1: addr 00:04:23:bf:d9:63 e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex eth0.20: add 01:00:5e:00:00:01 mcast address to master interface IA-32 Microcode Update Driver: v1.14a irq 217: nobody cared (try booting with the "irqpoll" option) [] show_trace_log_lvl+0x152/0x165 [] show_trace+0xf/0x13 [] dump_stack+0x15/0x19 [] __report_bad_irq+0x24/0x7f [] note_interrupt+0x6b/0xd5 [] __do_IRQ+0xf4/0x100 [] do_IRQ+0x95/0xbc [] common_interrupt+0x1a/0x20 [] uhci_irq+0x27/0x153 [] usb_hcd_irq+0x24/0x53 [] handle_IRQ_event+0x26/0x56 [] __do_IRQ+0x98/0x100 [] do_IRQ+0x95/0xbc [] common_interrupt+0x1a/0x20 [] mwait_idle+0x30/0x35 [] cpu_idle+0x78/0x81 [] start_kernel+0x173/0x19d [] 0xc0100210 DWARF2 unwinder stuck at 0xc0100210 Leftover inexact backtrace: ======================= handlers: [] (usb_hcd_irq+0x0/0x53) Disabling IRQ #217