lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <11548492242899-git-send-email-multinymous@gmail.com>
Date:	Sun, 06 Aug 2006 10:26:46 +0300
From:	Shem Multinymous <multinymous@...il.com>
To:	Robert Love <rlove@...ve.org>
Cc:	Jean Delvare <khali@...ux-fr.org>,
	Greg Kroah-Hartman <gregkh@...e.de>,
	Alan Cox <alan@...rguk.ukuu.org.uk>,
	linux-kernel@...r.kernel.org, hdaps-devel@...ts.sourceforge.net
Subject: [PATCH 01/12] thinkpad_ec: New driver for ThinkPad embedded controller access

The embedded controller on ThinkPad laptops has a non-standard interface
at IO ports 0x1600-0x161F (mapped to LCP channel 3 of the H8S chip).
The interface provides various system management services (currently 
known: battery information and accelerometer readouts). This driver
provides access and mutual exclusion for the EC interface.

The mainline hdaps driver already uses this hardware interface (in an 
incorrect and unsafe way), and will be converted to use this module in
the following patches. Another driver using this module, tp_smapi, will 
be submitted later.

The Kconfig entry is set to tristate and will be selected by hdaps and
(eventually) tp_smapi, since thinkpad_ec does nothing by itself.

Signed-off-by: Shem Multinymous <multinymous@...il.com>
---

This depends on dmi-decode-and-save-oem-string-information.patch 
pending in -mm ("[PATCH] DMI: Decode and save OEM String information" 
on LKML).

 drivers/firmware/Kconfig       |    3 
 drivers/firmware/Makefile      |    1 
 drivers/firmware/thinkpad_ec.c |  449 +++++++++++++++++++++++++++++++++++++++++
 include/linux/thinkpad_ec.h    |   47 ++++
 4 files changed, 500 insertions(+)


diff -dNurp a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
--- a/drivers/firmware/Kconfig	2006-08-05 04:31:21.000000000 +0300
+++ b/drivers/firmware/Kconfig	2006-08-05 04:31:21.000000000 +0300
@@ -84,4 +84,7 @@ config DCDBAS
 	  Say Y or M here to enable the driver for use by Dell systems
 	  management software such as Dell OpenManage.
 
+config THINKPAD_EC
+	tristate
+
 endmenu
diff -dNurp a/drivers/firmware/Makefile b/drivers/firmware/Makefile
--- a/drivers/firmware/Makefile	2006-08-05 04:31:21.000000000 +0300
+++ b/drivers/firmware/Makefile	2006-08-05 04:31:21.000000000 +0300
@@ -7,3 +7,4 @@ obj-$(CONFIG_EFI_VARS)		+= efivars.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
 obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
 obj-$(CONFIG_DCDBAS)		+= dcdbas.o
+obj-$(CONFIG_THINKPAD_EC)       += thinkpad_ec.o
diff -dNurp a/drivers/firmware/thinkpad_ec.c b/drivers/firmware/thinkpad_ec.c
--- a/drivers/firmware/thinkpad_ec.c	1970-01-01 02:00:00.000000000 +0200
+++ b/drivers/firmware/thinkpad_ec.c	2006-08-05 05:33:06.000000000 +0300
@@ -0,0 +1,444 @@
+/*
+ *  thinkpad_ec.c - coordinate access to ThinkPad-specific hardware resources
+ * 
+ *  The embedded controller on ThinkPad laptops has a non-standard interface
+ *  at IO ports 0x1600-0x161F (mapped to LCP channel 3 of the H8S chip).
+ *  The interface provides various system management services (currently 
+ *  known: battery information and accelerometer readouts). This driver
+ *  provides access and mutual exclusion for the EC interface.
+ *  For information about the LPC protocol and terminology, see:
+ *  "H8S/2104B Group Hardware Manual",
+ * http://documentation.renesas.com/eng/products/mpumcu/rej09b0300_2140bhm.pdf
+ *
+ *  Copyright (C) 2006 Shem Multinymous <multinymous@...il.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/thinkpad_ec.h>
+#include <linux/jiffies.h>
+#include <asm/io.h>
+
+#define TP_VERSION "0.27"
+
+MODULE_AUTHOR("Shem Multinymous");
+MODULE_DESCRIPTION("ThinkPad embedded controller hardware access");
+MODULE_VERSION(TP_VERSION);
+MODULE_LICENSE("GPL");
+
+/* IO ports used by embedded controller LPC channel 3: */
+#define TPC_BASE_PORT 0x1600
+#define TPC_NUM_PORTS 0x20
+#define TPC_STR3_PORT 0x1604  /* Reads H8S EC register STR3 */
+#define TPC_TWR0_PORT  0x1610 /* Mapped to H8S EC register TWR0MW/SW  */
+#define TPC_TWR15_PORT 0x161F /* Mapped to H8S EC register TWR15. */
+  /* (and port TPC_TWR0_PORT+i is mapped to H8S reg TWRi for 0<i<16) */
+
+/* H8S STR3 status flags (see "H8S/2104B Group Hardware Manual" p.549) */
+#define H8S_STR3_IBF3B 0x80  /* Bidi. Data Register Input Buffer Full */
+#define H8S_STR3_OBF3B 0x40  /* Bidi. Data Register Output Buffer Full */
+#define H8S_STR3_MWMF  0x20  /* Master Write Mode Flag */
+#define H8S_STR3_SWMF  0x10  /* Slave Write Mode Flag */
+#define H8S_STR3_MASK  0xF0  /* All bits we care about in STR3 */
+
+/* Timeouts and retries */
+#define TPC_READ_RETRIES    150
+#define TPC_READ_NDELAY     500
+#define TPC_REQUEST_RETRIES 100
+#define TPC_REQUEST_NDELAY   10
+#define TPC_PREFETCH_TIMEOUT   (HZ/10)  /* invalidate prefetch after 0.1sec */
+
+/* Module parameters: */
+static int tp_debug = 0;
+module_param_named(debug, tp_debug, int, 0600);
+MODULE_PARM_DESC(debug, "Debug level (0=off, 1=on)");
+
+/* A few macros for printk()ing: */
+#define DPRINTK(fmt, args...) \
+  do { if (tp_debug) printk(KERN_DEBUG fmt, ## args); } while (0)
+#define MSG_FMT(fmt, args...) \
+  "thinkpad_ec: %s: " fmt "\n", __func__, ## args
+#define REQ_FMT(msg, code) \
+  MSG_FMT("%s: (0x%02x:0x%02x)->0x%02x", \
+          msg, args->val[0x0], args->val[0xF], code)
+
+/* State of request prefetching: */
+static u8 prefetch_arg0, prefetch_argF;           /* Args of last prefetch */
+static u64 prefetch_jiffies;                      /* time of prefetch, or: */
+#define TPC_PREFETCH_NONE   INITIAL_JIFFIES       /* - No prefetch */
+#define TPC_PREFETCH_JUNK   (INITIAL_JIFFIES+1)   /* - Ignore prefetch */
+
+/* Locking: */
+
+static DECLARE_MUTEX(thinkpad_ec_mutex);
+
+/* thinkpad_ec_lock:
+ * Get exclusive lock for accesing the controller. May sleep.
+ * Returns 0 iff lock acquired .
+ */
+int thinkpad_ec_lock(void) 
+{
+	int ret;
+	ret = down_interruptible(&thinkpad_ec_mutex);
+	if (ret)
+		DPRINTK("tp_controller mutex down interrupted: %d\n", ret);
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(thinkpad_ec_lock); 
+
+/* thinkpad_ec_try_lock:
+ * Get exclusive lock for accesing the controller but only if it's available.
+ * Does not block, does not sleep. Returns 0 iff lock acquired .
+ */
+int thinkpad_ec_try_lock(void) 
+{
+	return down_trylock(&thinkpad_ec_mutex);
+}
+
+EXPORT_SYMBOL_GPL(thinkpad_ec_try_lock); 
+
+/* thinkpad_ec_unlock:
+ * Release a previously acquired controller lock.
+ */
+void thinkpad_ec_unlock(void) 
+{
+ 	up(&thinkpad_ec_mutex);
+}
+
+EXPORT_SYMBOL_GPL(thinkpad_ec_unlock);
+
+/* Tell embedded controller to prepare a row */
+static int thinkpad_ec_request_row(const struct thinkpad_ec_row *args) 
+{
+	u8 str3;
+	int i;
+
+	/* EC protocol requires write to TWR0 (function code): */
+	if (!(args->mask & 0x0001)) {
+		printk(KERN_ERR MSG_FMT("bad args->mask=0x%02x", args->mask));
+		return -EINVAL;
+	}
+
+	/* Check initial STR3 status: */
+	str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK;
+	if (str3 & H8S_STR3_OBF3B) { /* data already pending */
+		inb(TPC_TWR15_PORT); /* marks end of previous transaction */
+		if (prefetch_jiffies == TPC_PREFETCH_NONE)
+			printk(KERN_WARNING
+			       REQ_FMT("readout already pending", str3));
+		return -EBUSY; /* EC will be ready in a few usecs */
+	} else if (str3 == H8S_STR3_SWMF) { /* busy with previous request */
+		if (prefetch_jiffies == TPC_PREFETCH_NONE)
+			printk(KERN_WARNING
+			       REQ_FMT("EC handles previous request", str3));
+		return -EBUSY; /* data will be pending in a few usecs */
+	} else if (str3 != 0x00) { /* unexpected status? */
+		printk(KERN_WARNING REQ_FMT("bad initial STR3", str3));
+		return -EIO;
+	}
+
+	/* Send TWR0MW: */
+	outb(args->val[0], TPC_TWR0_PORT);
+	str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK;
+	if (str3 != H8S_STR3_MWMF) { /* not accepted? */
+		printk(KERN_WARNING REQ_FMT("arg0 rejected", str3));
+		return -EIO;
+	}
+
+	/* Send TWR1 through TWR14: */
+	for (i=1; i<TP_CONTROLLER_ROW_LEN-1; i++)
+		if ((args->mask>>i)&1)
+			outb(args->val[i], TPC_TWR0_PORT+i);
+
+	/* Send TWR15 (default to 0x01). This marks end of command. */
+	outb((args->mask & 0x8000) ? args->val[0xF] : 0x01, TPC_TWR15_PORT);
+
+	/* Wait until EC starts writing its reply (~60ns on average).
+	 * Releasing locks before this happens may cause an EC hang
+	 * due to firmware bug!
+	 */
+	for (i=0; i<TPC_REQUEST_RETRIES; ++i) {
+		str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK;
+		if (str3 & H8S_STR3_SWMF) /* EC started replying */
+			return 0;
+		else if (str3==(H8S_STR3_IBF3B|H8S_STR3_MWMF) ||
+		         str3==0x00) /* normal progress, wait it out */
+			ndelay(TPC_REQUEST_NDELAY);
+		else { /* weird EC status */
+			printk(KERN_WARNING
+			       REQ_FMT("bad end STR3", str3));
+			return -EIO;
+		}
+	}
+	printk(KERN_WARNING REQ_FMT("EC is mysteriously silent", str3));
+	return -EIO;
+}
+
+/* Read current row data from the controller, assuming it's already
+ * requested. 
+ */
+static int thinkpad_ec_read_data(struct thinkpad_ec_row *data)
+{
+	int i;
+	u8 str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK;
+	/* Once we make a request, STR3 assumes the sequence of values listed
+         * in the following 'if' as it reads the request and writes its data.
+	 * It takes about a few dozen nanosecs total, with very high variance.
+	 */
+	if (str3==(H8S_STR3_IBF3B|H8S_STR3_MWMF) ||
+	    str3==0x00 ||   /* the 0x00 is indistinguishable from idle EC! */
+	    str3==H8S_STR3_SWMF )
+		return -EBUSY; /* not ready yet */
+	/* Finally, the EC signals output buffer full: */
+	if (str3 != (H8S_STR3_OBF3B|H8S_STR3_SWMF)) {
+		printk(KERN_WARNING
+		       MSG_FMT("bad initial STR3 (0x%02x)", str3));
+		return -EIO;
+	}
+		
+	/* Read first byte (signals start of read transactions): */
+	data->val[0] = inb(TPC_TWR0_PORT);
+	/* Optionally read 14 more bytes: */
+	for (i=1; i<TP_CONTROLLER_ROW_LEN-1; ++i)
+		if ((data->mask >> i)&1)
+			data->val[i] = inb(TPC_TWR0_PORT+i);
+	/* Read last byte from 0x161F (signals end of read transaction): */
+	data->val[0xF] = inb(TPC_TWR15_PORT);
+		
+	/* Readout still pending? */
+	str3 = inb(TPC_STR3_PORT) & H8S_STR3_MASK;
+	if (str3 & H8S_STR3_OBF3B)
+		printk(KERN_WARNING
+		       MSG_FMT("OBF3B=1 after read (0x%02x)", str3));
+	return 0;
+}
+
+/* Is the given row currently prefetched? 
+ * To keep things simple we compare only the first and last args;
+ * in practice this suffices                                        .*/
+static int thinkpad_ec_is_row_fetched(const struct thinkpad_ec_row *args)
+{
+	return (prefetch_jiffies != TPC_PREFETCH_NONE) &&
+	       (prefetch_jiffies != TPC_PREFETCH_JUNK) &&
+	       (prefetch_arg0 == args->val[0]) &&
+	       (prefetch_argF == args->val[0xF]) &&
+	       (get_jiffies_64() < prefetch_jiffies + TPC_PREFETCH_TIMEOUT);
+}
+
+/* thinkpad_ec_read_row:
+ * Read a data row from the controller, fetching and retrying if needed.
+ * The row args are specified by 16 byte arguments, some of which may be 
+ * missing (but the first and last are mandatory). These are given in 
+ * args->val[], where args->val[i] is used iff (args->mask>>i)&1).
+ * The rows's data is stored in data->val[], but is only guaranteed to be 
+ * valid for indices corresponding to set bit in data->maska. That is,
+ * if (data->mask>>i)&1==0 then data->val[i] may not be filled (to save time).
+ * Returns -EBUSY on transient error and -EIO on abnormal condition.
+ * Caller must hold controller lock. 
+ */
+int thinkpad_ec_read_row(const struct thinkpad_ec_row *args,
+                           struct thinkpad_ec_row *data)
+{
+	int retries, ret;
+
+	if (thinkpad_ec_is_row_fetched(args))
+		goto read_row; /* already requested */
+
+	/* Request the row */
+	for (retries=0; retries<TPC_READ_RETRIES; ++retries) {
+		ret = thinkpad_ec_request_row(args);
+		if (!ret)
+			goto read_row;
+		if (ret != -EBUSY)
+			break;
+		ndelay(TPC_READ_NDELAY);
+	}
+	printk(KERN_ERR REQ_FMT("failed requesting row", ret));
+	goto out;
+
+read_row:
+	/* Read the row's data */
+	for (retries=0; retries<TPC_READ_RETRIES; ++retries) {
+		ret = thinkpad_ec_read_data(data);
+		if (!ret)
+			goto out;
+		if (ret!=-EBUSY)
+			break;
+		ndelay(TPC_READ_NDELAY);
+	}
+
+	printk(KERN_ERR REQ_FMT("failed waiting for data", ret));
+
+out:
+	prefetch_jiffies = TPC_PREFETCH_JUNK;
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(thinkpad_ec_read_row);
+
+/* thinkpad_ec_try_read_row:
+ * Try read a prefetched row from the controller. Don't fetch or retry.
+ * See thinkpad_ec_read_row above for the meaning of the arguments.
+ * Returns -EBUSY is data not ready and -ENODATA if row not prefetched.
+ * Caller must hold controller lock. 
+ */
+int thinkpad_ec_try_read_row(const struct thinkpad_ec_row *args,
+                               struct thinkpad_ec_row *data)
+{
+	int ret;
+	if (!thinkpad_ec_is_row_fetched(args)) {
+		ret = -ENODATA;
+	} else {
+		ret = thinkpad_ec_read_data(data);
+		if (!ret)
+			prefetch_jiffies = TPC_PREFETCH_NONE; /* eaten up */
+	}
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(thinkpad_ec_try_read_row);
+
+/* thinkpad_ec_prefetch_row:
+ * Prefetch data row from the controller. A subsequent call to
+ * thinkpad_ec_read_row() with the same arguments will be faster,
+ * and a subsequent call to thinkpad_ec_try_read_row stands a 
+ * good chance of succeeding if done neither too soon nor too late.
+ * See thinkpad_ec_read_row above for the meaning of the arguments.
+ * Returns -EBUSY on transient error and -EIO on abnormal condition.
+ * Caller must hold controller lock.
+ */
+int thinkpad_ec_prefetch_row(const struct thinkpad_ec_row *args)
+{
+	int ret;
+ 	ret = thinkpad_ec_request_row(args);
+	if (ret) {
+		prefetch_jiffies = TPC_PREFETCH_JUNK;
+	} else {
+		prefetch_jiffies = get_jiffies_64();
+		prefetch_arg0 = args->val[0x0];
+		prefetch_argF = args->val[0xF];
+	}
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(thinkpad_ec_prefetch_row);
+
+/* thinkpad_ec_invalidate:
+ * Invalidate the prefetched controller data.
+ * Must be called before unlocking by any code that accesses the controller
+ * ports directly.
+ */
+void thinkpad_ec_invalidate(void) 
+{
+	prefetch_jiffies = TPC_PREFETCH_JUNK;
+}
+
+EXPORT_SYMBOL_GPL(thinkpad_ec_invalidate);
+
+
+/*** Checking for EC hardware ***/
+
+/* thinkpad_ec_test:
+ * Ensure the EC LPC3 channel really works on this machine by making
+ * an arbitrary harmless EC request and seeing if the EC follows protocol.
+ * This test writes to IO ports, so execute only after checking DMI.
+ */
+static int thinkpad_ec_test(void) {
+	int ret;
+	const struct thinkpad_ec_row args = /* battery 0 basic status */
+	  { .mask=0x8001, .val={0x01,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0x00} };
+	struct thinkpad_ec_row data = { .mask = 0x0000 };
+	ret = thinkpad_ec_lock();
+	if (ret)
+		return ret;
+	ret = thinkpad_ec_read_row(&args, &data);
+	thinkpad_ec_unlock();
+	return ret;
+}
+
+/* Search all DMI device names for a given type for a substrng */
+static int __init dmi_find_substring(int type, const char *substr) {
+	struct dmi_device *dev = NULL;
+	while ((dev = dmi_find_device(type, NULL, dev))) {
+		if (strstr(dev->name, substr))
+			return 1;
+	}
+	return 0;
+}
+
+#define TP_DMI_MATCH(vendor,model)	{		\
+	.ident = vendor " " model,			\
+	.matches = {					\
+		DMI_MATCH(DMI_BOARD_VENDOR, vendor),	\
+		DMI_MATCH(DMI_PRODUCT_VERSION, model)	\
+	}						\
+}
+
+/* Check DMI for existence of ThinkPad embedded controller */
+static int __init check_dmi_for_ec(void) 
+{
+	/* A few old models that have a good EC but don't report it in DMI */
+	struct dmi_system_id tp_whitelist[] = {
+		TP_DMI_MATCH("IBM","ThinkPad A30"),
+		TP_DMI_MATCH("IBM","ThinkPad T23"),
+		TP_DMI_MATCH("IBM","ThinkPad X24"),
+		{ .ident = NULL }
+	};
+	return dmi_find_substring(DMI_DEV_TYPE_OEM_STRING,
+	                          "IBM ThinkPad Embedded Controller") ||
+	       dmi_check_system(tp_whitelist);
+}
+
+/*** Init and cleanup ***/
+
+static int __init thinkpad_ec_init(void)
+{
+	if (!check_dmi_for_ec()) {
+		printk(KERN_ERR "thinkpad_ec: no ThinkPad embedded controller!\n");
+		return -ENODEV;
+	}
+
+	if (!request_region(TPC_BASE_PORT, TPC_NUM_PORTS,
+	                    "thinkpad_ec")) 
+	{
+		printk(KERN_ERR "thinkpad_ec: cannot claim io ports %#x-%#x\n",
+		       TPC_BASE_PORT,
+		       TPC_BASE_PORT + TPC_NUM_PORTS -1);
+		return -ENXIO;
+	}
+	prefetch_jiffies = TPC_PREFETCH_JUNK;
+	if (thinkpad_ec_test()) {
+		printk(KERN_INFO "thinkpad_ec: initial ec test failed\n");
+		release_region(TPC_BASE_PORT, TPC_NUM_PORTS);
+		return -ENXIO;
+	}
+	printk(KERN_INFO "thinkpad_ec: thinkpad_ec " TP_VERSION " loaded.\n");
+	return 0;
+}
+
+static void __exit thinkpad_ec_exit(void)
+{
+	release_region(TPC_BASE_PORT, TPC_NUM_PORTS);
+	printk(KERN_INFO "thinkpad_ec: unloaded.\n");
+}
+
+module_init(thinkpad_ec_init);
+module_exit(thinkpad_ec_exit);
diff -dNurp a/include/linux/thinkpad_ec.h b/include/linux/thinkpad_ec.h
--- a/include/linux/thinkpad_ec.h	1970-01-01 02:00:00.000000000 +0200
+++ b/include/linux/thinkpad_ec.h	2006-08-05 05:33:06.000000000 +0300
@@ -0,0 +1,47 @@
+/*
+ *  thinkpad_ec.h - interface to ThinkPad embedded controller LPC3 functions
+ * 
+ *  Copyright (C) 2005 Shem Multinymous <multinymous@...il.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _THINKPAD_EC_H
+#define _THINKPAD_EC_H
+
+#ifdef __KERNEL__
+
+#define TP_CONTROLLER_ROW_LEN 16
+
+/* EC transactions input and output (possibly partial) vectors of 16 bytes. */
+struct thinkpad_ec_row {
+	u16 mask; /* bitmap of which entries of val[] are meaningful */
+	u8 val[TP_CONTROLLER_ROW_LEN];
+};
+
+extern int thinkpad_ec_lock(void);
+extern int thinkpad_ec_try_lock(void);
+extern void thinkpad_ec_unlock(void);
+
+extern int thinkpad_ec_read_row(const struct thinkpad_ec_row *args,
+                                struct thinkpad_ec_row *data);
+extern int thinkpad_ec_try_read_row(const struct thinkpad_ec_row *args,
+                                    struct thinkpad_ec_row *mask);
+extern int thinkpad_ec_prefetch_row(const struct thinkpad_ec_row *args);
+extern void thinkpad_ec_invalidate(void);
+
+
+#endif /* __KERNEL */
+#endif /* _THINKPAD_EC_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ