| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1154925835.21647.29.camel@localhost.localdomain>
Date: Mon, 07 Aug 2006 14:43:54 +1000
From: Rusty Russell <rusty@...tcorp.com.au>
To: Andrew Morton <akpm@...l.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Andi Kleen <ak@....de>, Zachary Amsden <zach@...are.com>,
virtualization <virtualization@...ts.osdl.org>,
Jeremy Fitzhardinge <jeremy@...source.com>,
Chris Wright <chrisw@...s-sol.org>
Subject: [PATCH 1/4] x86 paravirt_ops: create no_paravirt.h for native ops
(Andrew, please sit these in the -mm tree for cooking)
Create a paravirt.h header for (almost) all the critical operations
which need to be replaced with hypervisor calls.
For the moment, this simply includes no_paravirt.h, where all the
native implementations now live.
Signed-off-by: Rusty Russell <rusty@...tcorp.com.au>
Signed-off-by: Zachary Amsden <zach@...are.com>
===================================================================
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -49,6 +49,7 @@
#include <asm/page.h>
#include <asm/desc.h>
#include <asm/dwarf2.h>
+#include <asm/paravirt.h>
#include "irq_vectors.h"
#define nr_syscalls ((syscall_table_size)/4)
@@ -75,13 +76,6 @@ DF_MASK = 0x00000400
DF_MASK = 0x00000400
NT_MASK = 0x00004000
VM_MASK = 0x00020000
-
-/* These are replaces for paravirtualization */
-#define DISABLE_INTERRUPTS cli
-#define ENABLE_INTERRUPTS sti
-#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
-#define INTERRUPT_RETURN iret
-#define GET_CR0_INTO_EAX movl %cr0, %eax
#ifdef CONFIG_PREEMPT
#define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF
===================================================================
--- a/include/asm-i386/irqflags.h
+++ b/include/asm-i386/irqflags.h
@@ -9,62 +9,12 @@
*/
#ifndef _ASM_IRQFLAGS_H
#define _ASM_IRQFLAGS_H
+#include <asm/paravirt.h>
#ifndef __ASSEMBLY__
-static inline unsigned long __raw_local_save_flags(void)
-{
- unsigned long flags;
-
- __asm__ __volatile__(
- "pushfl ; popl %0"
- : "=g" (flags)
- : /* no input */
- );
-
- return flags;
-}
-
#define raw_local_save_flags(flags) \
do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
- __asm__ __volatile__(
- "pushl %0 ; popfl"
- : /* no output */
- :"g" (flags)
- :"memory", "cc"
- );
-}
-
-static inline void raw_local_irq_disable(void)
-{
- __asm__ __volatile__("cli" : : : "memory");
-}
-
-static inline void raw_local_irq_enable(void)
-{
- __asm__ __volatile__("sti" : : : "memory");
-}
-
-/*
- * Used in the idle loop; sti takes one instruction cycle
- * to complete:
- */
-static inline void raw_safe_halt(void)
-{
- __asm__ __volatile__("sti; hlt" : : : "memory");
-}
-
-/*
- * Used when interrupts are already enabled or to
- * shutdown the processor:
- */
-static inline void halt(void)
-{
- __asm__ __volatile__("hlt": : :"memory");
-}
static inline int raw_irqs_disabled_flags(unsigned long flags)
{
@@ -76,18 +26,6 @@ static inline int raw_irqs_disabled(void
unsigned long flags = __raw_local_save_flags();
return raw_irqs_disabled_flags(flags);
-}
-
-/*
- * For spinlocks, etc:
- */
-static inline unsigned long __raw_local_irq_save(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- raw_local_irq_disable();
-
- return flags;
}
#define raw_local_irq_save(flags) \
===================================================================
--- a/include/asm-i386/processor.h
+++ b/include/asm-i386/processor.h
@@ -20,6 +20,7 @@
#include <linux/threads.h>
#include <asm/percpu.h>
#include <linux/cpumask.h>
+#include <asm/paravirt.h>
/* flag for disabling the tsc */
extern int tsc_disable;
@@ -143,18 +144,6 @@ static inline void detect_ht(struct cpui
#define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */
#define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */
-static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
- unsigned int *ecx, unsigned int *edx)
-{
- /* ecx is often an input as well as an output. */
- __asm__("cpuid"
- : "=a" (*eax),
- "=b" (*ebx),
- "=c" (*ecx),
- "=d" (*edx)
- : "0" (*eax), "2" (*ecx));
-}
-
/*
* Generic CPUID function
* clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx
@@ -281,13 +270,6 @@ static inline void clear_in_cr4 (unsigne
outb((reg), 0x22); \
outb((data), 0x23); \
} while (0)
-
-/* Stop speculative execution */
-static inline void sync_core(void)
-{
- int tmp;
- asm volatile("cpuid" : "=a" (tmp) : "0" (1) : "ebx","ecx","edx","memory");
-}
static inline void __monitor(const void *eax, unsigned long ecx,
unsigned long edx)
@@ -508,33 +490,6 @@ static inline void load_esp0(struct tss_
regs->esp = new_esp; \
} while (0)
-/*
- * These special macros can be used to get or set a debugging register
- */
-#define get_debugreg(var, register) \
- __asm__("movl %%db" #register ", %0" \
- :"=r" (var))
-#define set_debugreg(value, register) \
- __asm__("movl %0,%%db" #register \
- : /* no output */ \
- :"r" (value))
-
-/*
- * Set IOPL bits in EFLAGS from given mask
- */
-static inline void set_iopl_mask(unsigned mask)
-{
- unsigned int reg;
- __asm__ __volatile__ ("pushfl;"
- "popl %0;"
- "andl %1, %0;"
- "orl %2, %0;"
- "pushl %0;"
- "popfl"
- : "=&r" (reg)
- : "i" (~X86_EFLAGS_IOPL), "r" (mask));
-}
-
/* Forward declaration, a strange C thing */
struct task_struct;
struct mm_struct;
===================================================================
--- a/include/asm-i386/segment.h
+++ b/include/asm-i386/segment.h
@@ -121,5 +121,4 @@
/* Bottom three bits of xcs give the ring privilege level */
#define SEGMENT_RPL_MASK 0x3
-#define get_kernel_rpl() 0
#endif
===================================================================
--- a/include/asm-i386/spinlock.h
+++ b/include/asm-i386/spinlock.h
@@ -5,6 +5,7 @@
#include <asm/rwlock.h>
#include <asm/page.h>
#include <linux/compiler.h>
+#include <asm/paravirt.h>
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
@@ -16,9 +17,6 @@
*
* (the type definitions are in asm/spinlock_types.h)
*/
-
-#define CLI_STRING "cli"
-#define STI_STRING "sti"
#define __raw_spin_is_locked(x) \
(*(volatile signed char *)(&(x)->slock) <= 0)
===================================================================
--- a/include/asm-i386/system.h
+++ b/include/asm-i386/system.h
@@ -5,6 +5,7 @@
#include <asm/segment.h>
#include <asm/cpufeature.h>
#include <linux/bitops.h> /* for LOCK_PREFIX */
+#include <asm/paravirt.h>
#ifdef __KERNEL__
@@ -82,67 +83,10 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t"
#define savesegment(seg, value) \
asm volatile("mov %%" #seg ",%0":"=rm" (value))
-#define read_cr0() ({ \
- unsigned int __dummy; \
- __asm__ __volatile__( \
- "movl %%cr0,%0\n\t" \
- :"=r" (__dummy)); \
- __dummy; \
-})
-#define write_cr0(x) \
- __asm__ __volatile__("movl %0,%%cr0": :"r" (x))
-
-#define read_cr2() ({ \
- unsigned int __dummy; \
- __asm__ __volatile__( \
- "movl %%cr2,%0\n\t" \
- :"=r" (__dummy)); \
- __dummy; \
-})
-#define write_cr2(x) \
- __asm__ __volatile__("movl %0,%%cr2": :"r" (x))
-
-#define read_cr3() ({ \
- unsigned int __dummy; \
- __asm__ ( \
- "movl %%cr3,%0\n\t" \
- :"=r" (__dummy)); \
- __dummy; \
-})
-#define write_cr3(x) \
- __asm__ __volatile__("movl %0,%%cr3": :"r" (x))
-
-#define read_cr4() ({ \
- unsigned int __dummy; \
- __asm__( \
- "movl %%cr4,%0\n\t" \
- :"=r" (__dummy)); \
- __dummy; \
-})
-#define read_cr4_safe() ({ \
- unsigned int __dummy; \
- /* This could fault if %cr4 does not exist */ \
- __asm__("1: movl %%cr4, %0 \n" \
- "2: \n" \
- ".section __ex_table,\"a\" \n" \
- ".long 1b,2b \n" \
- ".previous \n" \
- : "=r" (__dummy): "0" (0)); \
- __dummy; \
-})
-#define write_cr4(x) \
- __asm__ __volatile__("movl %0,%%cr4": :"r" (x))
-
-/*
- * Clear and set 'TS' bit respectively
- */
-#define clts() __asm__ __volatile__ ("clts")
+/* Set 'TS' bit */
#define stts() write_cr0(8 | read_cr0())
#endif /* __KERNEL__ */
-
-#define wbinvd() \
- __asm__ __volatile__ ("wbinvd": : :"memory")
static inline unsigned long get_limit(unsigned long segment)
{
===================================================================
--- /dev/null
+++ b/include/asm-i386/no_paravirt.h
@@ -0,0 +1,189 @@
+#ifndef __ASM_NO_PARAVIRT_H
+#define __ASM_NO_PARAVIRT_H
+/* This is the native implementation of the paravirtualized
+ * instruction wrappers. */
+
+#ifndef __ASSEMBLY__
+/* The non-paravirtualized CPUID instruction. */
+static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
+ unsigned int *ecx, unsigned int *edx)
+{
+ /* ecx is often an input as well: see processor.h. */
+ __asm__("cpuid"
+ : "=a" (*eax),
+ "=b" (*ebx),
+ "=c" (*ecx),
+ "=d" (*edx)
+ : "0" (*eax), "2" (*ecx));
+}
+
+/*
+ * These special macros can be used to get or set a debugging register
+ */
+#define get_debugreg(var, register) \
+ __asm__("movl %%db" #register ", %0" \
+ :"=r" (var))
+#define set_debugreg(value, register) \
+ __asm__("movl %0,%%db" #register \
+ : /* no output */ \
+ :"r" (value))
+
+/*
+ * Set IOPL bits in EFLAGS from given mask
+ */
+static inline void set_iopl_mask(unsigned mask)
+{
+ unsigned int reg;
+ __asm__ __volatile__ ("pushfl;"
+ "popl %0;"
+ "andl %1, %0;"
+ "orl %2, %0;"
+ "pushl %0;"
+ "popfl"
+ : "=&r" (reg)
+ : "i" (~0x3000 /*X86_EFLAGS_IOPL*/), "r" (mask));
+}
+
+/* Stop speculative execution */
+static inline void sync_core(void)
+{
+ unsigned int eax = 1, ebx, ecx, edx;
+ __cpuid(&eax, &ebx, &ecx, &edx);
+}
+
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
+#define read_cr0() ({ \
+ unsigned int __dummy; \
+ __asm__ __volatile__( \
+ "movl %%cr0,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr0(x) \
+ __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+
+#define read_cr2() ({ \
+ unsigned int __dummy; \
+ __asm__ __volatile__( \
+ "movl %%cr2,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr2(x) \
+ __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+
+#define read_cr3() ({ \
+ unsigned int __dummy; \
+ __asm__ ( \
+ "movl %%cr3,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr3(x) \
+ __asm__ __volatile__("movl %0,%%cr3": :"r" (x));
+
+#define read_cr4() ({ \
+ unsigned int __dummy; \
+ __asm__( \
+ "movl %%cr4,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+
+#define read_cr4_safe() ({ \
+ unsigned int __dummy; \
+ /* This could fault if %cr4 does not exist */ \
+ __asm__("1: movl %%cr4, %0 \n" \
+ "2: \n" \
+ ".section __ex_table,\"a\" \n" \
+ ".long 1b,2b \n" \
+ ".previous \n" \
+ : "=r" (__dummy): "0" (0)); \
+ __dummy; \
+})
+
+#define write_cr4(x) \
+ __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+ unsigned long flags;
+
+ __asm__ __volatile__(
+ "pushfl ; popl %0"
+ : "=g" (flags)
+ : /* no input */
+ );
+
+ return flags;
+}
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ __asm__ __volatile__(
+ "pushl %0 ; popfl"
+ : /* no output */
+ :"g" (flags)
+ :"memory", "cc"
+ );
+}
+
+static inline void raw_local_irq_disable(void)
+{
+ __asm__ __volatile__("cli" : : : "memory");
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ raw_local_irq_disable();
+
+ return flags;
+}
+
+static inline void raw_local_irq_enable(void)
+{
+ __asm__ __volatile__("sti" : : : "memory");
+}
+
+/*
+ * Used in the idle loop; sti takes one instruction cycle
+ * to complete:
+ */
+static inline void raw_safe_halt(void)
+{
+ __asm__ __volatile__("sti; hlt" : : : "memory");
+}
+
+/*
+ * Used when interrupts are already enabled or to
+ * shutdown the processor:
+ */
+static inline void halt(void)
+{
+ __asm__ __volatile__("hlt": : :"memory");
+}
+
+static inline void wbinvd(void)
+{
+ __asm__ __volatile__("wbinvd": : :"memory");
+}
+
+#define get_kernel_rpl() 0
+
+#define CLI_STRING "cli"
+#define STI_STRING "sti"
+
+#else /* ... __ASSEMBLY__ */
+#define INTERRUPT_RETURN iret
+#define DISABLE_INTERRUPTS cli
+#define ENABLE_INTERRUPTS sti
+#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
+#define GET_CR0_INTO_EAX mov %cr0, %eax
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_NO_PARAVIRT_H */
===================================================================
--- /dev/null
+++ b/include/asm-i386/paravirt.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARAVIRT_H
+#define __ASM_PARAVIRT_H
+/* Various instructions on x86 need to be replaced for
+ * para-virtualization: those hooks are defined here. */
+#include <asm/no_paravirt.h>
+
+#endif /* __ASM_PARAVIRT_H */
--
Help! Save Australia from the worst of the DMCA: http://linux.org.au/law
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists