| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20060809102442.GA3965@in.ibm.com>
Date: Wed, 9 Aug 2006 15:54:42 +0530
From: Ananth N Mavinakayanahalli <ananth@...ibm.com>
To: Christoph Hellwig <hch@...radead.org>,
linux-kernel@...r.kernel.org,
Prasanna S Panchamukhi <prasanna@...ibm.com>,
Anil S Keshavamurthy <anil.s.keshavamurthy@...el.com>,
Jim Keniston <jkenisto@...ibm.com>
Subject: Re: [PATCH 3/3] Kprobes: Update Documentation/kprobes.txt
On Wed, Aug 09, 2006 at 03:18:59PM +0530, Ananth N Mavinakayanahalli wrote:
> On Tue, Aug 08, 2006 at 05:27:01PM +0100, Christoph Hellwig wrote:
> > On Mon, Aug 07, 2006 at 05:34:47PM +0530, Ananth N Mavinakayanahalli wrote:
> > > From: Ananth N Mavinakayanahalli <ananth@...ibm.com>
> > >
> > > Update Documentation/kprobes.txt to reflect addition of KPROBE_ADDR,
> > > KPROBE_RETVAL and the in-kernel symbol resolution.
> >
> > Thanks. With my updated patch we shouldn't document KPROBE_ADDR anymore
> > but tell people to always use the symbol_name mechanisms.
>
Hopefully the final version :)
Update Documentation/kprobes.txt:
- Add usage details of "symbol_name" and "offset" fields of struct kprobe
- Document return_value and JPROBE_ENTRY
- Update references list
- Update module examples to use module_init/module_exit interfaces
Signed-off-by: Ananth N Mavinakayanahalli <ananth@...ibm.com>
---
Documentation/kprobes.txt | 77 ++++++++++++++++++++++++++++------------------
1 files changed, 47 insertions(+), 30 deletions(-)
Index: linux-2.6.18-rc3/Documentation/kprobes.txt
===================================================================
--- linux-2.6.18-rc3.orig/Documentation/kprobes.txt
+++ linux-2.6.18-rc3/Documentation/kprobes.txt
@@ -179,6 +179,21 @@ occurs during execution of kp->pre_handl
or during single-stepping of the probed instruction, Kprobes calls
kp->fault_handler. Any or all handlers can be NULL.
+NOTE:
+1. With the introduction of the "symbol_name" field to struct kprobe,
+the probepoint address resolution will now be taken care of by the kernel.
+The following will now work:
+
+ kp.symbol_name = "symbol_name";
+
+2. Use the "offset" field of struct kprobe if the offset into the symbol
+to install a probepoint is known. This field is used to calculate the
+probepoint address only if the "symbol_name" method of address resolution
+is used.
+
+3. Specify either the kprobe "symbol_name" with "offset" OR the "addr".
+If both are specified, kprobe registration will fail with -EINVAL.
+
register_kprobe() returns 0 on success, or a negative errno otherwise.
User's pre-handler (kp->pre_handler):
@@ -225,6 +240,12 @@ control to Kprobes.) If the probed func
fastcall, or anything else that affects how args are passed, the
handler's declaration must match.
+NOTE: A macro JPROBE_ENTRY is provided to handle architecture-specific
+aliasing of jp->entry. In the interest of portability, it is advised
+to use:
+
+ jp->entry = JPROBE_ENTRY(handler);
+
register_jprobe() returns 0 on success, or a negative errno otherwise.
4.3 register_kretprobe
@@ -251,6 +272,11 @@ of interest:
- ret_addr: the return address
- rp: points to the corresponding kretprobe object
- task: points to the corresponding task struct
+
+The return_value(regs) macro provides a simple abstraction to extract
+the return value from the appropriate register as defined by the
+architecture's ABI.
+
The handler's return value is currently ignored.
4.4 unregister_*probe
@@ -369,7 +395,6 @@ stack trace and selected i386 registers
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kprobes.h>
-#include <linux/kallsyms.h>
#include <linux/sched.h>
/*For each probe you need to allocate a kprobe structure*/
@@ -403,18 +428,14 @@ int handler_fault(struct kprobe *p, stru
return 0;
}
-int init_module(void)
+static int __init kprobe_init(void)
{
int ret;
kp.pre_handler = handler_pre;
kp.post_handler = handler_post;
kp.fault_handler = handler_fault;
- kp.addr = (kprobe_opcode_t*) kallsyms_lookup_name("do_fork");
- /* register the kprobe now */
- if (!kp.addr) {
- printk("Couldn't find %s to plant kprobe\n", "do_fork");
- return -1;
- }
+ kp.symbol_name = "do_fork";
+
if ((ret = register_kprobe(&kp) < 0)) {
printk("register_kprobe failed, returned %d\n", ret);
return -1;
@@ -423,12 +444,14 @@ int init_module(void)
return 0;
}
-void cleanup_module(void)
+static void __exit kprobe_exit(void)
{
unregister_kprobe(&kp);
printk("kprobe unregistered\n");
}
+module_init(kprobe_init)
+module_exit(kprobe_exit)
MODULE_LICENSE("GPL");
----- cut here -----
@@ -463,7 +486,6 @@ the arguments of do_fork().
#include <linux/fs.h>
#include <linux/uio.h>
#include <linux/kprobes.h>
-#include <linux/kallsyms.h>
/*
* Jumper probe for do_fork.
@@ -485,17 +507,13 @@ long jdo_fork(unsigned long clone_flags,
}
static struct jprobe my_jprobe = {
- .entry = (kprobe_opcode_t *) jdo_fork
+ .entry = JPROBE_ENTRY(jdo_fork)
};
-int init_module(void)
+static int __init jprobe_init(void)
{
int ret;
- my_jprobe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("do_fork");
- if (!my_jprobe.kp.addr) {
- printk("Couldn't find %s to plant jprobe\n", "do_fork");
- return -1;
- }
+ my_jprobe.kp.symbol_name = "do_fork";
if ((ret = register_jprobe(&my_jprobe)) <0) {
printk("register_jprobe failed, returned %d\n", ret);
@@ -506,12 +524,14 @@ int init_module(void)
return 0;
}
-void cleanup_module(void)
+static void __exit jprobe_exit(void)
{
unregister_jprobe(&my_jprobe);
printk("jprobe unregistered\n");
}
+module_init(jprobe_init)
+module_exit(jprobe_exit)
MODULE_LICENSE("GPL");
----- cut here -----
@@ -530,16 +550,13 @@ report failed calls to sys_open().
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kprobes.h>
-#include <linux/kallsyms.h>
static const char *probed_func = "sys_open";
/* Return-probe handler: If the probed function fails, log the return value. */
static int ret_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
{
- // Substitute the appropriate register name for your architecture --
- // e.g., regs->rax for x86_64, regs->gpr[3] for ppc64.
- int retval = (int) regs->eax;
+ int retval = return_value(regs);
if (retval < 0) {
printk("%s returns %d\n", probed_func, retval);
}
@@ -552,15 +569,11 @@ static struct kretprobe my_kretprobe = {
.maxactive = 20
};
-int init_module(void)
+static int __init kretprobe_init(void)
{
int ret;
- my_kretprobe.kp.addr =
- (kprobe_opcode_t *) kallsyms_lookup_name(probed_func);
- if (!my_kretprobe.kp.addr) {
- printk("Couldn't find %s to plant return probe\n", probed_func);
- return -1;
- }
+ my_kretprobe.kp.symbol_name = (char *)probed_func;
+
if ((ret = register_kretprobe(&my_kretprobe)) < 0) {
printk("register_kretprobe failed, returned %d\n", ret);
return -1;
@@ -569,7 +582,7 @@ int init_module(void)
return 0;
}
-void cleanup_module(void)
+static void __exit kretprobe_exit(void)
{
unregister_kretprobe(&my_kretprobe);
printk("kretprobe unregistered\n");
@@ -578,6 +591,8 @@ void cleanup_module(void)
my_kretprobe.nmissed, probed_func);
}
+module_init(kretprobe_init)
+module_exit(kretprobe_exit)
MODULE_LICENSE("GPL");
----- cut here -----
@@ -590,3 +605,5 @@ messages.)
For additional information on Kprobes, refer to the following URLs:
http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe
http://www.redhat.com/magazine/005mar05/features/kprobes/
+http://www-users.cs.umn.edu/~boutcher/kprobes/
+http://www.linuxsymposium.org/2006/linuxsymposium_procv2.pdf (pages 101-115)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists