[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20060821220053.GR11651@stusta.de>
Date: Tue, 22 Aug 2006 00:00:53 +0200
From: Adrian Bunk <bunk@...sta.de>
To: Jeff Garzik <jgarzik@...ox.com>
Cc: Alan Cox <alan@...rguk.ukuu.org.uk>, linux-kernel@...r.kernel.org,
linux-ide@...r.kernel.org
Subject: [libata patch] cleanup drivers/ata/Kconfig
This patch contains the following cleanups:
- replace the dependencies on ATA with an "if ATA"
as a side effect, this fixes a menu breakage due to SATA_INTEL_COMBINED
- fix a typo in the PATA_OPTIDMA prompt
- let ATA selet SCSI instead of depending on SCSI
this should make it easier for users to enable ATA (similar to USB_STORAGE)
Signed-off-by: Adrian Bunk <bunk@...sta.de>
---
This patch was already sent on:
- 15 Aug 2006
Alans additional suggestions that will be in another patch.
drivers/ata/Kconfig | 115 ++++++++++++++++++++++----------------------
1 file changed, 58 insertions(+), 57 deletions(-)
--- libata-dev/drivers/ata/Kconfig.old 2006-08-15 00:23:28.000000000 +0200
+++ libata-dev/drivers/ata/Kconfig 2006-08-15 00:28:02.000000000 +0200
@@ -1,483 +1,484 @@
#
# SATA/PATA driver configuration
#
menu "Serial ATA (prod) and Parallel ATA (experimental) drivers"
- depends on SCSI
config ATA
tristate "ATA device support"
- depends on SCSI
+ select SCSI
---help---
If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
any other ATA device under Linux, say Y and make sure that you know
the name of your ATA host adapter (the card inside your computer
that "speaks" the ATA protocol, also called ATA controller),
because you will be asked for it.
+if ATA
+
config SATA_AHCI
tristate "AHCI SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for AHCI Serial ATA.
If unsure, say N.
config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
If unsure, say N.
config ATA_PIIX
tristate "Intel PIIX/ICH SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for ICH5/6/7/8 Serial ATA.
If PATA support was enabled previously, this enables
support for select Intel PIIX/ICH PATA host controllers.
If unsure, say N.
config SATA_MV
tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] chips.
If unsure, say N.
config SATA_NV
tristate "NVIDIA SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for NVIDIA Serial ATA.
If unsure, say N.
config PDC_ADMA
tristate "Pacific Digital ADMA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for Pacific Digital ADMA controllers
If unsure, say N.
config SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for Pacific Digital Serial ATA QStor.
If unsure, say N.
config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for Promise Serial ATA TX2/TX4.
If unsure, say N.
config SATA_SX4
tristate "Promise SATA SX4 support"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for Promise Serial ATA SX4.
If unsure, say N.
config SATA_SIL
tristate "Silicon Image SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for Silicon Image Serial ATA.
If unsure, say N.
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
config SATA_SIS
tristate "SiS 964/180 SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for SiS Serial ATA 964/180.
If unsure, say N.
config SATA_ULI
tristate "ULi Electronics SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for ULi Electronics SATA.
If unsure, say N.
config SATA_VIA
tristate "VIA SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for VIA Serial ATA.
If unsure, say N.
config SATA_VITESSE
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
If unsure, say N.
config SATA_INTEL_COMBINED
bool
depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
default y
config PATA_ALI
tristate "ALi PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the ALi ATA interfaces
found on the many ALi chipsets.
If unsure, say N.
config PATA_AMD
tristate "AMD/NVidia PATA support (Experimental)"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for the AMD and NVidia PATA
interfaces found on the chipsets for Athlon/Athlon64.
If unsure, say N.
config PATA_ARTOP
tristate "ARTOP 6210/6260 PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for ARTOP PATA controllers.
If unsure, say N.
config PATA_ATIIXP
tristate "ATI PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the ATI ATA interfaces
found on the many ATI chipsets.
If unsure, say N.
config PATA_CMD64X
tristate "CMD64x PATA support (Very Experimental)"
- depends on ATA && PCI&& EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the CMD64x series chips
except for the CMD640.
If unsure, say N.
config PATA_CS5520
tristate "CS5510/5520 PATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for the Cyrix 5510/5520
companion chip used with the MediaGX/Geode processor family.
If unsure, say N.
config PATA_CS5530
tristate "CS5530 PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the Cyrix/NatSemi/AMD CS5530
companion chip used with the MediaGX/Geode processor family.
If unsure, say N.
config PATA_CS5535
tristate "CS5535 PATA support (Experimental)"
- depends on ATA && PCI && X86 && !X86_64 && EXPERIMENTAL
+ depends on PCI && X86 && !X86_64 && EXPERIMENTAL
help
This option enables support for the NatSemi/AMD CS5535
companion chip used with the Geode processor family.
If unsure, say N.
config PATA_CYPRESS
tristate "Cypress CY82C693 PATA support (Very Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the Cypress/Contaq CY82C693
chipset found in some Alpha systems
If unsure, say N.
config PATA_EFAR
tristate "EFAR SLC90E66 support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for the EFAR SLC90E66
IDE controller found on some older machines.
If unsure, say N.
config ATA_GENERIC
tristate "Generic ATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for generic BIOS configured
ATA controllers via the new ATA layer
If unsure, say N.
config PATA_HPT366
tristate "HPT 366/368 PATA support (Very Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the HPT 366 and 368
PATA controllers via the new ATA layer.
If unsure, say N.
config PATA_HPT37X
tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the majority of the later HPT
PATA controllers via the new ATA layer.
If unsure, say N.
config PATA_HPT3X2N
tristate "HPT 372N/302N PATA support (Very Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the N variant HPT PATA
controllers via the new ATA layer
If unsure, say N.
config PATA_HPT3X3
tristate "HPT 343/363 PATA support (Experimental)"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for the HPT 343/363
PATA controllers via the new ATA layer
If unsure, say N.
config PATA_ISAPNP
tristate "ISA Plug and Play PATA support (Very Experimental)"
- depends on ATA && EXPERIMENTAL && ISAPNP
+ depends on EXPERIMENTAL && ISAPNP
help
This option enables support for ISA plug & play ATA
controllers such as those found on old soundcards.
If unsure, say N.
config PATA_IT8172
tristate "IT8172 PATA support (Very Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the ITE 8172 PATA controller
via the new ATA layer.
If unsure, say N.
config PATA_IT821X
tristate "IT821x PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the ITE 8211 and 8212
PATA controllers via the new ATA layer, including RAID
mode.
If unsure, say N.
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for ISA/VLB bus legacy PATA
ports and allows them to be accessed via the new ATA layer.
If unsure, say N.
config PATA_TRIFLEX
tristate "Compaq Triflex PATA support"
- depends on ATA && PCI
+ depends on PCI
help
Enable support for the Compaq 'Triflex' IDE controller as found
on many Compaq Pentium-Pro systems, via the new ATA layer.
If unsure, say N.
config PATA_MPIIX
tristate "Intel PATA MPIIX support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for MPIIX PATA support.
If unsure, say N.
config PATA_OLDPIIX
tristate "Intel PATA old PIIX support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for old(?) PIIX PATA support.
If unsure, say N.
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for the Netcell Revolution RAID
PATA controller.
If unsure, say N.
config PATA_NS87410
tristate "Nat Semi NS87410 PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the National Semiconductor
NS87410 PCI-IDE controller.
If unsure, say N.
config PATA_OPTI
tristate "OPTI621/6215 PATA support (Very Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables full PIO support for the early Opti ATA
controllers found on some old motherboards.
If unsure, say N.
config PATA_OPTIDMA
- tristate "OPTI FireStar PATA support (Veyr Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ tristate "OPTI FireStar PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
help
This option enables DMA/PIO support for the later OPTi
controllers found on some old motherboards and in some
latops
If unsure, say N.
config PATA_PCMCIA
tristate "PCMCIA PATA support"
- depends on ATA && PCMCIA
+ depends on PCMCIA
help
This option enables support for PCMCIA ATA interfaces, including
compact flash card adapters via the new ATA layer.
If unsure, say N.
config PATA_PDC_OLD
tristate "Older Promise PATA controller support (Very Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters.
If unsure, say N.
config PATA_QDI
tristate "QDI VLB PATA support"
- depends on ATA
help
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
config PATA_RADISYS
tristate "RADISYS 82600 PATA support (Very experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the RADISYS 82600
PATA controllers via the new ATA layer
If unsure, say N.
config PATA_RZ1000
tristate "PC Tech RZ1000 PATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables basic support for the PC Tech RZ1000/1
PATA controllers via the new ATA layer
If unsure, say N.
config PATA_SC1200
tristate "SC1200 PATA support (Raving Lunatic)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
If unsure, say N.
config PATA_SERVERWORKS
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for the Serverworks OSB4/CSB5/CSB6 and
HT1000 PATA controllers, via the new ATA layer.
If unsure, say N.
config PATA_PDC2027X
tristate "Promise PATA 2027x support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
If unsure, say N.
config PATA_SIL680
tristate "CMD / Silicon Image 680 PATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for CMD / Silicon Image 680 PATA.
If unsure, say N.
config PATA_SIS
tristate "SiS PATA support (Experimental)"
- depends on ATA && PCI && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This option enables support for SiS PATA controllers
If unsure, say N.
config PATA_VIA
tristate "VIA PATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for the VIA PATA interfaces
found on the many VIA chipsets.
If unsure, say N.
config PATA_WINBOND
tristate "Winbond SL82C105 PATA support"
- depends on ATA && PCI
+ depends on PCI
help
This option enables support for SL82C105 PATA devices found in the
Netwinder and some other systems
If unsure, say N.
-endmenu
+endif # ATA
+endmenu # "ATA drivers"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists