| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1156192327.5852.3.camel@localhost.localdomain>
Date: Mon, 21 Aug 2006 16:32:07 -0400
From: Jesse Huang <jesse@...lus.com.tw>
To: romieu@...zoreil.com, penberg@...Helsinki.FI, akpm@...l.org,
dvrabel@...tab.net, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Subject: [PATCH] IP1000A: IC Plus update
Dear All:
I had regenerate this patch from:
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/netdev-ipg-2.6.git
And, submit those modifications as one patch.
From: Jesse Huang <jesse@...lus.com.tw>
Change Logs:
- update maintainer information
- remove some default phy params
- remove threshold config from ipg_io_config
- ip1000 ipg_config_autoneg rewrite
- modify coding style of ipg_config_autoneg
- Add IPG_AC_FIFO flag when Tx reset
- For compatible at PCI 66MHz issue
Signed-off-by: Jesse Huang <jesse@...lus.com.tw>
Thanks!
Best Regards,
Jesse Huang
---
ipg.c | 394 +++++++++++++++--------------------------------------------------
ipg.h | 96 +---------------
2 files changed, 92 insertions(+), 398 deletions(-)
8bd0325e52d2578c37cd251aeac2136f7cca9098
diff --git a/ipg.c b/ipg.c
index 754ddb5..7c541c2 100644
--- a/ipg.c
+++ b/ipg.c
@@ -1,18 +1,26 @@
-/*PCI_DEVICE_ID_IP1000
+/*
+ * ipg.c: Device Driver for the IP1000 Gigabit Ethernet Adapter
+ *
+ * Copyright (C) 2003, 2006 IC Plus Corp.
+ *
+ * Original Author:
*
- * ipg.c
+ * Craig Rich
+ * Sundance Technology, Inc.
+ * 1485 Saratoga Avenue
+ * Suite 200
+ * San Jose, CA 95129
+ * 408 873 4117
+ * www.sundanceti.com
+ * craig_rich@...danceti.com
*
- * IC Plus IP1000 Gigabit Ethernet Adapter Linux Driver v2.01
- * by IC Plus Corp. 2003
+ * Current Maintainer:
*
- * Craig Rich
- * Sundance Technology, Inc.
- * 1485 Saratoga Avenue
- * Suite 200
- * San Jose, CA 95129
- * 408 873 4117
- * www.sundanceti.com
- * craig_rich@...danceti.com
+ * Sorbica Shieh.
+ * 10F, No.47, Lane 2, Kwang-Fu RD.
+ * Sec. 2, Hsin-Chu, Taiwan, R.O.C.
+ * http://www.icplus.com.tw
+ * sorbica@...lus.com.tw
*/
#include <linux/crc32.h>
#include <linux/ethtool.h>
@@ -476,26 +484,20 @@ static int ipg_config_autoneg(struct net
{
struct ipg_nic_private *sp = netdev_priv(dev);
void __iomem *ioaddr = sp->ioaddr;
+ u8 phyctrl;
u32 asicctrl;
- u32 mac_ctl;
- int phyaddr = 0;
- u16 status = 0;
- u16 advertisement;
- u16 linkpartner_ability;
- u16 gigadvertisement;
- u16 giglinkpartner_ability;
- u16 techabilities;
int fiber;
int gig;
int fullduplex;
int txflowcontrol;
int rxflowcontrol;
- u8 phyctrl;
+ long mac_ctrl_value;
IPG_DEBUG_MSG("_config_autoneg\n");
asicctrl = ioread32(ioaddr + ASIC_CTRL);
- phyctrl = ioread8(ioaddr + PHY_CTRL);
+ phyctrl = ioread8(ioaddr + PHY_CTRL);
+ mac_ctrl_value = ioread32(ioaddr + MAC_CTRL);
/* Set flags for use in resolving auto-negotation, assuming
* non-1000Mbps, half duplex, no flow control.
@@ -511,14 +513,13 @@ static int ipg_config_autoneg(struct net
*/
sp->tenmbpsmode = 0;
- printk("Link speed = ");
+ printk(KERN_INFO "Link speed = ");
/* Determine actual speed of operation. */
switch (phyctrl & IPG_PC_LINK_SPEED) {
case IPG_PC_LINK_SPEED_10MBPS:
printk("10Mbps.\n");
- printk(KERN_INFO "%s: 10Mbps operational mode enabled.\n",
- dev->name);
+ printk("%s: 10Mbps operational mode enabled.\n",dev->name);
sp->tenmbpsmode = 1;
break;
case IPG_PC_LINK_SPEED_100MBPS:
@@ -530,283 +531,50 @@ static int ipg_config_autoneg(struct net
break;
default:
printk("undefined!\n");
- }
-
- fiber = ipg_sti_fiber_detect(dev);
-
- /* Determine if auto-negotiation resolution is necessary.
- * First check for fiber based media 10/100 media.
- */
- if ((fiber == 1) &&
- (asicctrl & (IPG_AC_PHY_SPEED10 | IPG_AC_PHY_SPEED100))) {
- printk(KERN_INFO
- "%s: Fiber based PHY, setting full duplex, no flow control.\n",
- dev->name);
-
- mac_ctl = ioread32(ioaddr + MAC_CTRL);
- mac_ctl |= IPG_MC_DUPLEX_SELECT_FD;
- mac_ctl &= ~IPG_MC_TX_FLOW_CONTROL_ENABLE;
- mac_ctl &= ~IPG_MC_RX_FLOW_CONTROL_ENABLE;
-
- iowrite32(IPG_MC_RSVD_MASK & mac_ctl, ioaddr + MAC_CTRL);
-
return 0;
}
- /* Determine if PHY is auto-negotiation capable. */
- phyaddr = ipg_find_phyaddr(dev);
-
- if (phyaddr == -1) {
- printk(KERN_INFO
- "%s: Error on read to GMII/MII Status register.\n",
- dev->name);
- return -EILSEQ;
- }
- sp->mii_if.phy_id = phyaddr;
-
- IPG_DEBUG_MSG("GMII/MII PHY address = %x\n", phyaddr);
-
- status = mdio_read(dev, phyaddr, MII_BMSR);
-
- printk("PHYStatus = %x \n", status);
- if ((status & BMSR_ANEGCAPABLE) == 0) {
- printk(KERN_INFO
- "%s: Error PHY unable to perform auto-negotiation.\n",
- dev->name);
- return -EILSEQ;
+ if (phyctrl & IPG_PC_DUPLEX_STATUS) {
+ fullduplex = 1;
+ txflowcontrol = 1;
+ rxflowcontrol = 1;
+ } else {
+ fullduplex = 0;
+ txflowcontrol = 0;
+ rxflowcontrol = 0;
}
- advertisement = mdio_read(dev, phyaddr, MII_ADVERTISE);
- linkpartner_ability = mdio_read(dev, phyaddr, MII_LPA);
-
- printk("PHYadvertisement=%x LinkPartner=%x \n", advertisement,
- linkpartner_ability);
- if ((advertisement == 0xFFFF) || (linkpartner_ability == 0xFFFF)) {
- printk(KERN_INFO
- "%s: Error on read to GMII/MII registers 4 and/or 5.\n",
- dev->name);
- return -EILSEQ;
- }
-
- fiber = ipg_tmi_fiber_detect(dev, phyaddr);
-
- /* Resolve full/half duplex if 1000BASE-X. */
- if ((gig == 1) && (fiber == 1)) {
- int bmcr;
- /*
- * Compare the full duplex bits in the GMII registers
- * for the local device, and the link partner. If these
- * bits are logic 1 in both registers, configure the
- * IPG for full duplex operation.
- */
- bmcr = mdio_read(dev, phyaddr, MII_BMCR);
+ /* Configure full duplex, and flow control. */
+ if (fullduplex == 1) {
+ /* Configure IPG for full duplex operation. */
+ printk(KERN_INFO "setting full duplex, ");
- if ((advertisement & ADVERTISE_1000XFULL) ==
- (linkpartner_ability & ADVERTISE_1000XFULL)) {
- fullduplex = 1;
+ mac_ctrl_value |= IPG_MC_DUPLEX_SELECT_FD;
- /* In 1000BASE-X using IPG's internal PCS
- * layer, so write to the GMII duplex bit.
- */
- bmcr |= ADVERTISE_1000HALF; // Typo ?
+ if (txflowcontrol == 1) {
+ printk("TX flow control");
+ mac_ctrl_value |= IPG_MC_TX_FLOW_CONTROL_ENABLE;
} else {
- fullduplex = 0;
-
- /* In 1000BASE-X using IPG's internal PCS
- * layer, so write to the GMII duplex bit.
- */
- bmcr &= ~ADVERTISE_1000HALF; // Typo ?
+ printk("no TX flow control");
+ mac_ctrl_value &= ~IPG_MC_TX_FLOW_CONTROL_ENABLE;
}
- mdio_write(dev, phyaddr, MII_BMCR, bmcr);
- }
- /* Resolve full/half duplex if 1000BASE-T. */
- if ((gig == 1) && (fiber == 0)) {
- /* Read the 1000BASE-T "Control" and "Status"
- * registers which represent the advertised and
- * link partner abilities exchanged via next page
- * transfers.
- */
- gigadvertisement = mdio_read(dev, phyaddr, MII_CTRL1000);
- giglinkpartner_ability = mdio_read(dev, phyaddr, MII_STAT1000);
-
- /* Compare the full duplex bits in the 1000BASE-T GMII
- * registers for the local device, and the link partner.
- * If these bits are logic 1 in both registers, configure
- * the IPG for full duplex operation.
- */
- if ((gigadvertisement & ADVERTISE_1000FULL) &&
- (giglinkpartner_ability & ADVERTISE_1000FULL)) {
- fullduplex = 1;
+ if (rxflowcontrol == 1) {
+ printk(", RX flow control.");
+ mac_ctrl_value |= IPG_MC_RX_FLOW_CONTROL_ENABLE;
} else {
- fullduplex = 0;
- }
- }
-
- /* Resolve full/half duplex for 10/100BASE-T. */
- if (gig == 0) {
- /* Autonegotiation Priority Resolution algorithm, as defined in
- * IEEE 802.3 Annex 28B.
- */
- if (((advertisement & ADVERTISE_SLCT) ==
- MII_PHY_SELECTOR_IEEE8023) &&
- ((linkpartner_ability & ADVERTISE_SLCT) ==
- MII_PHY_SELECTOR_IEEE8023)) {
- techabilities = (advertisement & linkpartner_ability &
- MII_PHY_TECHABILITYFIELD);
-
- fullduplex = 0;
-
- /* 10BASE-TX half duplex is lowest priority. */
- if (techabilities & LPA_10HALF)
- fullduplex = 0;
-
- if (techabilities & LPA_10FULL)
- fullduplex = 1;
-
- if (techabilities & LPA_100HALF)
- fullduplex = 0;
-
- if (techabilities & LPA_100BASE4)
- fullduplex = 0;
-
- /* 100BASE-TX half duplex is highest priority. *///Sorbica full duplex ?
- if (techabilities & LPA_100FULL)
- fullduplex = 1;
-
- if (fullduplex == 1) {
- /* If in full duplex mode, determine if PAUSE
- * functionality is supported by the local
- * device, and the link partner.
- */
- if (techabilities & LPA_PAUSE_CAP) {
- txflowcontrol = 1;
- rxflowcontrol = 1;
- } else {
- txflowcontrol = 0;
- rxflowcontrol = 0;
- }
- }
+ printk(", no RX flow control.");
+ mac_ctrl_value = mac_ctrl_value & ~IPG_MC_RX_FLOW_CONTROL_ENABLE;
}
- }
-
- /* If in 1000Mbps, fiber, and full duplex mode, resolve
- * 1000BASE-X PAUSE capabilities. */
- if ((fullduplex == 1) && (fiber == 1) && (gig == 1)) {
- /* In full duplex mode, resolve PAUSE
- * functionality.
- */
- u8 flow_ctl;
-#define LPA_PAUSE_ANY (LPA_1000XPAUSE_ASYM | LPA_1000XPAUSE)
-
- flow_ctl = (advertisement & LPA_PAUSE_ANY) >> 5;
- flow_ctl |= (linkpartner_ability & LPA_PAUSE_ANY) >> 7;
- switch (flow_ctl) {
- case 0x7:
- txflowcontrol = 1;
- rxflowcontrol = 0;
- break;
-
- case 0xA:
- case 0xB:
- case 0xE:
- case 0xF:
- txflowcontrol = 1;
- rxflowcontrol = 1;
- break;
- case 0xD:
- txflowcontrol = 0;
- rxflowcontrol = 1;
- break;
+ printk("\n");
+ } else {
+ /* Configure IPG for half duplex operation. */
+ printk(KERN_INFO "setting half duplex, no TX flow control, no RX flow control.\n");
- default:
- txflowcontrol = 0;
- rxflowcontrol = 0;
- }
+ mac_ctrl_value &= ~IPG_MC_DUPLEX_SELECT_FD & ~IPG_MC_TX_FLOW_CONTROL_ENABLE & ~IPG_MC_RX_FLOW_CONTROL_ENABLE;
}
-
- /*
- * If in 1000Mbps, non-fiber, full duplex mode, resolve
- * 1000BASE-T PAUSE capabilities.
- */
- if ((fullduplex == 1) && (fiber == 0) && (gig == 1)) {
- /*
- * Make sure the PHY is advertising we are PAUSE capable.
- * Otherwise advertise PAUSE and restart auto-negotiation.
- */
-#define ADVERTISE_PAUSE_ANY (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)
-
- if (!(ADVERTISE_PAUSE_ANY & advertisement)) {
- advertisement |= ADVERTISE_PAUSE_ANY;
- mdio_write(dev, phyaddr, MII_ADVERTISE, advertisement);
- mdio_write(dev, phyaddr, MII_BMCR, BMCR_ANRESTART);
-
- return -EAGAIN;
- }
- /* In full duplex mode, resolve PAUSE functionality. */
- switch (((ADVERTISE_PAUSE_ANY & advertisement) >> 0x8) |
- ((ADVERTISE_PAUSE_ANY & linkpartner_ability) >> 0xa)) {
- case 0x7:
- txflowcontrol = 1;
- rxflowcontrol = 0;
- break;
-
- case 0xA:
- case 0xB:
- case 0xE:
- case 0xF:
- txflowcontrol = 1;
- rxflowcontrol = 1;
- break;
-
- case 0xD:
- txflowcontrol = 0;
- rxflowcontrol = 1;
- break;
-
- default:
- txflowcontrol = 0;
- rxflowcontrol = 0;
- }
- }
-
- /*
- * If in 10/100Mbps, non-fiber, full duplex mode, assure
- * 10/100BASE-T PAUSE capabilities are advertised.
- * Otherwise advertise PAUSE and restart auto-negotiation.
- */
- if ((fullduplex == 1) && (fiber == 0) && (gig == 0) &&
- !(advertisement & ADVERTISE_PAUSE_CAP)) {
- advertisement |= ADVERTISE_PAUSE_CAP;
- mdio_write(dev, phyaddr, MII_ADVERTISE, advertisement);
- mdio_write(dev, phyaddr, MII_BMCR, BMCR_ANRESTART);
- return -EAGAIN;
- }
-
- printk(KERN_INFO "%s: %s based PHY, ", dev->name,
- (fiber == 1) ? "fiber" : "copper");
-
- /* Configure full duplex, and flow control. */
-
- mac_ctl = ioread32(ioaddr + MAC_CTRL);
-
- mac_ctl &= ~IPG_MC_DUPLEX_SELECT_FD;
- mac_ctl &= ~IPG_MC_TX_FLOW_CONTROL_ENABLE;
- mac_ctl &= ~IPG_MC_RX_FLOW_CONTROL_ENABLE;
-
- if (fullduplex == 1) {
- mac_ctl |= IPG_MC_DUPLEX_SELECT_FD;
-
- if (txflowcontrol == 1)
- mac_ctl |= IPG_MC_TX_FLOW_CONTROL_ENABLE;
-
- if (rxflowcontrol == 1)
- mac_ctl |= IPG_MC_RX_FLOW_CONTROL_ENABLE;
- }
-
- iowrite32(IPG_MC_RSVD_MASK & mac_ctl, ioaddr + MAC_CTRL);
-
+ iowrite32(mac_ctrl_value , ioaddr+MAC_CTRL);
return 0;
}
@@ -935,15 +703,7 @@ static int ipg_io_config(struct net_devi
ipg_nic_set_multicast_list(dev);
iowrite16(IPG_MAX_RXFRAME_SIZE, ioaddr + MAX_FRAME_SIZE);
- iowrite16(IPG_RE_RSVD_MASK & (IPG_RXEARLYTHRESH_VALUE),
- ioaddr + RX_EARLY_THRESH);
- iowrite32(IPG_TT_RSVD_MASK & (IPG_TXSTARTTHRESH_VALUE),
- ioaddr + TX_START_THRESH);
- iowrite32((IPG_RI_RSVD_MASK &
- ((IPG_RI_RXFRAME_COUNT & IPG_RXFRAME_COUNT) |
- (IPG_RI_PRIORITY_THRESH & (IPG_PRIORITY_THRESH << 12)) |
- (IPG_RI_RXDMAWAIT_TIME & (IPG_RXDMAWAIT_TIME << 16)))),
- ioaddr + RX_DMA_INT_CTRL);
+
iowrite8(IPG_RP_RSVD_MASK & (IPG_RXDMAPOLLPERIOD_VALUE),
ioaddr + RX_DMA_POLL_PERIOD);
iowrite8(IPG_RU_RSVD_MASK & (IPG_RXDMAURGENTTHRESH_VALUE),
@@ -1125,10 +885,7 @@ static int init_tfdlist(struct net_devic
IPG_DEBUG_MSG("_init_tfdlist\n");
for (i = 0; i < IPG_TFDLIST_LENGTH; i++) {
- sp->TFDList[i].TFDNextPtr = cpu_to_le64(sp->TFDListDMAhandle +
- ((sizeof(struct TFD)) *
- ((i + 1) %
- IPG_TFDLIST_LENGTH)));
+ sp->TFDList[i].TFDNextPtr = 0;
sp->TFDList[i].TFC = cpu_to_le64(IPG_TFC_TFDDONE);
if (sp->TxBuff[i] != NULL)
@@ -1146,6 +903,7 @@ static int init_tfdlist(struct net_devic
iowrite32((u32) (sp->TFDListDMAhandle), ioaddr + TFD_LIST_PTR_0);
iowrite32(0x00000000, ioaddr + TFD_LIST_PTR_1);
+ sp->ResetCurrentTFD=1;
return 0;
}
@@ -1158,6 +916,7 @@ static void ipg_nic_txfree(struct net_de
struct ipg_nic_private *sp = netdev_priv(dev);
int NextToFree;
int maxtfdcount;
+ long CurrentTxTFDPtr=(ioread32(ipg_ioaddr(dev)+TFD_LIST_PTR_0)-(long)sp->TFDListDMAhandle)/(long)sizeof(struct TFD);
IPG_DEBUG_MSG("_nic_txfree\n");
@@ -1180,8 +939,10 @@ static void ipg_nic_txfree(struct net_de
* If the TFDDone bit is set, free the associated
* buffer.
*/
- if ((le64_to_cpu(sp->TFDList[NextToFree].TFC) &
- IPG_TFC_TFDDONE) && (NextToFree != sp->CurrentTFD)) {
+ if((NextToFree != sp->CurrentTFD)&&(NextToFree!=CurrentTxTFDPtr))
+ {
+ //JesseAdd: setup TFDDONE for compatible issue.
+ sp->TFDList[NextToFree].TFC = cpu_to_le64(sp->TFDList[NextToFree].TFC|IPG_TFC_TFDDONE);
/* Free the transmit buffer. */
if (sp->TxBuff[NextToFree] != NULL) {
pci_unmap_single(sp->pdev,
@@ -1204,6 +965,15 @@ static void ipg_nic_txfree(struct net_de
maxtfdcount--;
} while (maxtfdcount != 0);
+ if(sp->LastTFDHoldCnt>1000) {
+ sp->LastTFDHoldCnt=0;
+ ipg_reset(dev, IPG_AC_TX_RESET | IPG_AC_DMA | IPG_AC_NETWORK | IPG_AC_FIFO);
+ // Re-configure after DMA reset.
+ if ((ipg_io_config(dev) < 0) ||(init_tfdlist(dev) < 0)) {
+ printk(KERN_INFO"%s: Error during re-configuration.\n",dev->name);
+ }
+ iowrite32(IPG_MC_RSVD_MASK & (ioread32(ipg_ioaddr(dev) + MAC_CTRL) | IPG_MC_TX_ENABLE),ipg_ioaddr(dev) + MAC_CTRL);
+ }
}
/*
@@ -1275,7 +1045,7 @@ static void ipg_nic_txcleanup(struct net
IPG_DEBUG_MSG("Transmitter underrun.\n");
sp->stats.tx_fifo_errors++;
ipg_reset(dev, IPG_AC_TX_RESET |
- IPG_AC_DMA | IPG_AC_NETWORK);
+ IPG_AC_DMA | IPG_AC_NETWORK| IPG_AC_FIFO);
/* Re-configure after DMA reset. */
if ((ipg_io_config(dev) < 0) ||
@@ -2280,10 +2050,17 @@ static int ipg_nic_hard_start_xmit(struc
* counter, modulus the length of the TFDList.
*/
NextTFD = (sp->CurrentTFD + 1) % IPG_TFDLIST_LENGTH;
+ if(sp->ResetCurrentTFD!=0)
+ {
+ sp->ResetCurrentTFD=0;
+ NextTFD=0;
+ }
+ /* Check for availability of next TFD. Reserve 1 for not become ring*/
+ if (NextTFD == sp->LastFreedTxBuff) {
+
+ if(sp->LastTFDHoldAddr==sp->CurrentTFD) sp->LastTFDHoldCnt++;
+ else {sp->LastTFDHoldAddr=sp->CurrentTFD;sp->LastTFDHoldCnt=0;}
- /* Check for availability of next TFD. */
- if (!(le64_to_cpu(sp->TFDList[NextTFD].TFC) &
- IPG_TFC_TFDDONE) || (NextTFD == sp->LastFreedTxBuff)) {
IPG_DEBUG_MSG("Next TFD not available.\n");
/* Attempt to free any used TFDs. */
@@ -2297,8 +2074,11 @@ #ifdef IPG_DEBUG
sp->TFDunavailCount++;
#endif
+ iowrite32(IPG_DC_RSVD_MASK & (IPG_DC_TX_DMA_POLL_NOW),ioaddr + DMA_CTRL);
return -ENOMEM;
}
+
+ sp->TFDList[NextTFD].TFDNextPtr=0;
sp->TxBuffDMAhandle[NextTFD].len = skb->len;
sp->TxBuffDMAhandle[NextTFD].dmahandle =
@@ -2390,6 +2170,8 @@ #endif
* for transfer to the IPG.
*/
sp->TFDList[NextTFD].TFC &= cpu_to_le64(~IPG_TFC_TFDDONE);
+ sp->TFDList[sp->CurrentTFD].TFDNextPtr=cpu_to_le64(sp->TFDListDMAhandle+
+sizeof(struct TFD)*NextTFD);
/* Record frame transmit start time (jiffies = Linux
* kernel current time stamp).
diff --git a/ipg.h b/ipg.h
index 58b1417..9688483 100644
--- a/ipg.h
+++ b/ipg.h
@@ -80,14 +80,11 @@ enum ipg_regs {
RX_DMA_BURST_THRESH = 0x24,
RX_DMA_URGENT_THRESH = 0x25,
RX_DMA_POLL_PERIOD = 0x26,
- RX_DMA_INT_CTRL = 0x28,
DEBUG_CTRL = 0x2c,
ASIC_CTRL = 0x30,
FIFO_CTRL = 0x38, // Unused
- RX_EARLY_THRESH = 0x3a,
FLOW_OFF_THRESH = 0x3c,
FLOW_ON_THRESH = 0x3e,
- TX_START_THRESH = 0x44,
EEPROM_DATA = 0x48,
EEPROM_CTRL = 0x4a,
EXPROM_ADDR = 0x4c, // Unused
@@ -324,12 +321,6 @@ #define IPG_RU_RSVD_MASK
/* RxDMAPollPeriod */
#define IPG_RP_RSVD_MASK 0xFF
-/* TxStartThresh */
-#define IPG_TT_RSVD_MASK 0x0FFF
-
-/* RxEarlyThresh */
-#define IPG_RE_RSVD_MASK 0x07FF
-
/* ReceiveMode */
#define IPG_RM_RSVD_MASK 0x3F
#define IPG_RM_RECEIVEUNICAST 0x01
@@ -496,12 +487,6 @@ #define IPG_MC_RX_DISABLE
#define IPG_MC_RX_ENABLED 0x20000000
#define IPG_MC_PAUSED 0x40000000
-/* RxDMAIntCtrl */
-#define IPG_RI_RSVD_MASK 0xFFFF1CFF
-#define IPG_RI_RXFRAME_COUNT 0x000000FF
-#define IPG_RI_PRIORITY_THRESH 0x00001C00
-#define IPG_RI_RXDMAWAIT_TIME 0xFFFF0000
-
/*
* Tune
*/
@@ -662,32 +647,11 @@ #define IPG_MAXRFDPROCESS_COUNT 0x80
*/
#define IPG_MINUSEDRFDSTOFREE 0x80
-/* Specify priority threshhold for a RxDMAPriority interrupt. */
-#define IPG_PRIORITY_THRESH 0x07
-
-/* Specify the number of receive frames transferred via DMA
- * before a RX interrupt is issued.
- */
-#define IPG_RXFRAME_COUNT 0x08
-
/* specify the jumbo frame maximum size
* per unit is 0x600 (the RxBuffer size that one RFD can carry)
*/
#define MAX_JUMBOSIZE 0x8 // max is 12K
-/* Specify the maximum amount of time (in 64ns increments) to wait
- * before issuing a RX interrupt if number of frames received
- * is less than IPG_RXFRAME_COUNT.
- *
- * Value Time
- * -------------------
- * 0x3D09 ~1ms
- * 0x061A ~100us
- * 0x009C ~10us
- * 0x000F ~1us
- */
-#define IPG_RXDMAWAIT_TIME 0x009C
-
/* Key register values loaded at driver start up. */
/* TXDMAPollPeriod is specified in 320ns increments.
@@ -700,7 +664,6 @@ #define IPG_RXDMAWAIT_TIME 0x009C
* 0xFF ~82us
*/
#define IPG_TXDMAPOLLPERIOD_VALUE 0x26
-#define IPG_TXSTARTTHRESH_VALUE 0x0FFF
/* TxDMAUrgentThresh specifies the minimum amount of
* data in the transmit FIFO before asserting an
@@ -737,7 +700,6 @@ #define IPG_TXDMABURSTTHRESH_VALUE 0x30
* 0xFF ~82us
*/
#define IPG_RXDMAPOLLPERIOD_VALUE 0x01
-#define IPG_RXEARLYTHRESH_VALUE 0x07FF
/* RxDMAUrgentThresh specifies the minimum amount of
* free space within the receive FIFO before asserting
@@ -872,7 +834,9 @@ #endif
struct mutex mii_mutex;
struct mii_if_info mii_if;
-
+ long LastTFDHoldAddr;
+ int LastTFDHoldCnt;
+ int ResetCurrentTFD;
#ifdef IPG_DEBUG
int TFDunavailCount;
int RFDlistendCount;
@@ -919,59 +883,7 @@ unsigned short DefaultPhyParam[] = {
// 01/09/04 IP1000A v1-5 rev=0x41
(0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x42
- (0x4200 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x43
- (0x4300 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x44
- (0x4400 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x45
- (0x4500 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x46
- (0x4600 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x47
- (0x4700 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x48
- (0x4800 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x49
- (0x4900 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x4A
- (0x4A00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x4B
- (0x4B00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x4C
- (0x4C00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x4D
- (0x4D00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x4E
- (0x4E00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
+ 30, 0x005e, 9, 0x0700,
0x0000
};
--
1.3.GIT
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists