| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <00cb01c6c598$a1f0ede0$4964a8c0@icplus.com.tw>
Date: Tue, 22 Aug 2006 11:11:16 +0800
From: "Jesse Huang" <jesse@...lus.com.tw>
To: "Randy.Dunlap" <rdunlap@...otime.net>
Cc: <romieu@...zoreil.com>, <penberg@...Helsinki.FI>, <akpm@...l.org>,
<dvrabel@...tab.net>, <linux-kernel@...r.kernel.org>,
<netdev@...r.kernel.org>
Subject: Re: [PATCH] IP1000A: IC Plus update
Hi Randy:
Thanks for your review. I will follow your suggestions. I used
git-format-diff
to generate this patch, should I use diffstat to instead of it?
The old DefaultPhyParam table content a lot of furture hardware parameters.
We are sure now that is not need for new version of IP1000A, so I remove
those.
Thanks for help.
Jesse
----- Original Message -----
From: "Randy.Dunlap" <rdunlap@...otime.net>
To: "Jesse Huang" <jesse@...lus.com.tw>
Cc: <romieu@...zoreil.com>; <penberg@...Helsinki.FI>; <akpm@...l.org>;
<dvrabel@...tab.net>; <linux-kernel@...r.kernel.org>;
<netdev@...r.kernel.org>
Sent: Tuesday, August 22, 2006 12:25 AM
Subject: Re: [PATCH] IP1000A: IC Plus update
On Mon, 21 Aug 2006 16:32:07 -0400 Jesse Huang wrote:
> Dear All:
> I had regenerate this patch from:
> git://git.kernel.org/pub/scm/linux/kernel/git/penberg/netdev-ipg-2.6.git
>
> And, submit those modifications as one patch.
>
> From: Jesse Huang <jesse@...lus.com.tw>
>
> Change Logs:
> - update maintainer information
> - remove some default phy params
> - remove threshold config from ipg_io_config
> - ip1000 ipg_config_autoneg rewrite
> - modify coding style of ipg_config_autoneg
> - Add IPG_AC_FIFO flag when Tx reset
> - For compatible at PCI 66MHz issue
>
> Signed-off-by: Jesse Huang <jesse@...lus.com.tw>
> ---
>
> ipg.c | 394 ++++++++++++++
> +-------------------------------------------------- ipg.h | 96
> +--------------- 2 files changed, 92 insertions(+), 398 deletions(-)
Please use "diffstat -p1 -w 70" for diffstat output so that we can
see the full path/file names that are modified in the patch.
> 8bd0325e52d2578c37cd251aeac2136f7cca9098
> diff --git a/ipg.c b/ipg.c
> index 754ddb5..7c541c2 100644
> --- a/ipg.c
> +++ b/ipg.c
Similar to the diffstat comment, the "diff" a & b filenames should
show the full path to the source file, e.g.:
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
> @@ -511,14 +513,13 @@ static int ipg_config_autoneg(struct net
> */
> sp->tenmbpsmode = 0;
>
> - printk("Link speed = ");
> + printk(KERN_INFO "Link speed = ");
>
> /* Determine actual speed of operation. */
> switch (phyctrl & IPG_PC_LINK_SPEED) {
> case IPG_PC_LINK_SPEED_10MBPS:
> printk("10Mbps.\n");
> - printk(KERN_INFO "%s: 10Mbps operational mode
> enabled.\n",
> - dev->name);
> + printk("%s: 10Mbps operational mode enabled.
> \n",dev->name);
Space before "dev->name".
Why dropping the KERN_INFO here? The previous printk contains
a newline character, so KERN_* is still valid.
> sp->tenmbpsmode = 1;
> break;
> case IPG_PC_LINK_SPEED_100MBPS:
> @@ -530,283 +531,50 @@ static int ipg_config_autoneg(struct net
> + /* Configure full duplex, and flow control. */
> + if (fullduplex == 1) {
> + /* Configure IPG for full duplex operation. */
> + printk(KERN_INFO "setting full duplex, ");
This series of printk calls needs some kind of device or driver
identification.
> - if ((advertisement & ADVERTISE_1000XFULL) ==
> - (linkpartner_ability & ADVERTISE_1000XFULL)) {
> - fullduplex = 1;
> + mac_ctrl_value |= IPG_MC_DUPLEX_SELECT_FD;
>
> - /* In 1000BASE-X using IPG's internal PCS
> - * layer, so write to the GMII duplex bit.
> - */
> - bmcr |= ADVERTISE_1000HALF; // Typo ?
> + if (txflowcontrol == 1) {
> + printk("TX flow control");
> + mac_ctrl_value |=
> IPG_MC_TX_FLOW_CONTROL_ENABLE; } else {
> - fullduplex = 0;
> -
> - /* In 1000BASE-X using IPG's internal PCS
> - * layer, so write to the GMII duplex bit.
> - */
> - bmcr &= ~ADVERTISE_1000HALF; // Typo ?
> + printk("no TX flow control");
> + mac_ctrl_value &=
> ~IPG_MC_TX_FLOW_CONTROL_ENABLE; }
> - mdio_write(dev, phyaddr, MII_BMCR, bmcr);
> - }
> + } else {
> + /* Configure IPG for half duplex operation. */
> + printk(KERN_INFO "setting half duplex, no TX flow
> control, no RX flow control.\n");
Same here: needs device (preferably) or driver identification.
> - default:
> - txflowcontrol = 0;
> - rxflowcontrol = 0;
> - }
> + mac_ctrl_value &= ~IPG_MC_DUPLEX_SELECT_FD &
> ~IPG_MC_TX_FLOW_CONTROL_ENABLE & ~IPG_MC_RX_FLOW_CONTROL_ENABLE; }
> @@ -1158,6 +916,7 @@ static void ipg_nic_txfree(struct net_de
> struct ipg_nic_private *sp = netdev_priv(dev);
> int NextToFree;
> int maxtfdcount;
> + long CurrentTxTFDPtr=(ioread32(ipg_ioaddr(dev)
> +TFD_LIST_PTR_0)-(long)sp->TFDListDMAhandle)/(long)sizeof(struct
> TFD);
Space before and after '=' sign.
> @@ -1180,8 +939,10 @@ static void ipg_nic_txfree(struct net_de
> * If the TFDDone bit is set, free the associated
> * buffer.
> */
> - if ((le64_to_cpu(sp->TFDList[NextToFree].TFC) &
> - IPG_TFC_TFDDONE) && (NextToFree !=
> sp->CurrentTFD)) {
> + if((NextToFree != sp->CurrentTFD)&&(NextToFree!
> =CurrentTxTFDPtr))
Spaces before and after "&&" and "!=" etc. (as in the former code).
> + {
> + //JesseAdd: setup TFDDONE for compatible
> issue.
> + sp->TFDList[NextToFree].TFC = cpu_to_le64
> (sp->TFDList[NextToFree].TFC|IPG_TFC_TFDDONE); /* Free the transmit
> buffer. */ if (sp->TxBuff[NextToFree] != NULL) {
> pci_unmap_single(sp->pdev,
> @@ -1204,6 +965,15 @@ static void ipg_nic_txfree(struct net_de
> maxtfdcount--;
>
> } while (maxtfdcount != 0);
> + if(sp->LastTFDHoldCnt>1000) {
Space between "if" and "(". Space before/after ">".
and on next line ("=").
> + sp->LastTFDHoldCnt=0;
> + ipg_reset(dev, IPG_AC_TX_RESET | IPG_AC_DMA |
> IPG_AC_NETWORK | IPG_AC_FIFO);
> + // Re-configure after DMA reset.
> + if ((ipg_io_config(dev) < 0) ||(init_tfdlist(dev)
> < 0)) {
> + printk(KERN_INFO"%s: Error during
> re-configuration.\n",dev->name);
Space before "dev->name". And after KERN_INFO.
Could you save an error code from ipg_io_config() or init_tfdlist()
and give the user a bit more meaningful message?
> + }
> @@ -2280,10 +2050,17 @@ static int ipg_nic_hard_start_xmit(struc
> * counter, modulus the length of the TFDList.
> */
> NextTFD = (sp->CurrentTFD + 1) % IPG_TFDLIST_LENGTH;
> + if(sp->ResetCurrentTFD!=0)
Spaces. Make it human-readable, not just machine-readable.
> + {
> + sp->ResetCurrentTFD=0;
> + NextTFD=0;
> + }
> + /* Check for availability of next TFD. Reserve 1 for not
> become ring*/
> + if (NextTFD == sp->LastFreedTxBuff) {
> +
> + if(sp->LastTFDHoldAddr==sp->CurrentTFD)
Spaces....
> diff --git a/ipg.h b/ipg.h
> index 58b1417..9688483 100644
> --- a/ipg.h
> +++ b/ipg.h
> @@ -919,59 +883,7 @@ unsigned short DefaultPhyParam[] = {
> // 01/09/04 IP1000A v1-5 rev=0x41
> (0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31, 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x42
> - (0x4200 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x43
> - (0x4300 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x44
> - (0x4400 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x45
> - (0x4500 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x46
> - (0x4600 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x47
> - (0x4700 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x48
> - (0x4800 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x49
> - (0x4900 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x4A
> - (0x4A00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x4B
> - (0x4B00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x4C
> - (0x4C00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x4D
> - (0x4D00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> - // 01/09/04 IP1000A v1-5 rev=0x4E
> - (0x4E00 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002,
> 27, 0xeb8e, 31,
> - 0x0000,
> - 30, 0x005e, 9, 0x0700,
> + 30, 0x005e, 9, 0x0700,
Eh? This change just adds whitespace at end of line.
This happens in other places too. Please clean up all of those.
Does removing all of those other entries prevent anyone's
hardware from working correctly?
---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists