PROMLIB: Sun IEEE Boot Prom 'OBP 3.7.107 1998/02/19 17:54' PROMLIB: Root node compatible: sun4u Linux version 2.6.18-rc4 (root@lug) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #2 SMP Tue Aug 22 14:30:37 BST 2006 ARCH: SUN4U Ethernet address: 08:00:20:90:ca:21 PROM: Built device tree with 92893 bytes of memory. On node 0 totalpages: 130147 DMA zone: 130147 pages, LIFO batch:15 Built 1 zonelists. Total pages: 130147 Kernel command line: root=/dev/sdb1 ro ofdebug=2 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 6, 524288 bytes) Memory: 1031496k available (2120k kernel code, 768k data, 160k init) [fffff80000000000,000000003fe86000] Calibrating delay using timer specific routine.. 592.47 BogoMIPS (lpj=1184952) Mount-cache hash table entries: 512 CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):line_sz(64)] Using max_cache_size of 2MB Calibrating delay using timer specific routine.. 592.03 BogoMIPS (lpj=1184076) CPU[1]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):line_sz(64)] CPU 1: synchronized TICK with master CPU (last diff 0 cycles,maxerr 442 cycles) Calibrating delay using timer specific routine.. 592.04 BogoMIPS (lpj=1184080) CPU[2]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):line_sz(64)] CPU 2: synchronized TICK with master CPU (last diff 0 cycles,maxerr 446 cycles) Calibrating delay using timer specific routine.. 592.03 BogoMIPS (lpj=1184077) CPU[3]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):line_sz(64)] CPU 3: synchronized TICK with master CPU (last diff -1 cycles,maxerr 448 cycles) Brought up 4 CPUs Total of 4 processors activated (2368.59 BogoMIPS). migration_cost=27075 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 2400k freed NET: Registered protocol family 16 PCI: Probing for controllers. /pci@1f,4000: PSYCHO PCI Bus Module ver[4:0] /pci@1f,2000: PSYCHO PCI Bus Module ver[4:0] /pci@4,4000: PSYCHO PCI Bus Module ver[4:0] /pci@4,2000: PSYCHO PCI Bus Module ver[4:0] /pci@6,4000: PSYCHO PCI Bus Module ver[4:0] /pci@6,2000: PSYCHO PCI Bus Module ver[4:0] PCI2(PBMB): Bus running at 33MHz PCI2(PBMA): Bus running at 66MHz PCI1(PBMB): Bus running at 33MHz PCI1(PBMA): Bus running at 66MHz PCI0(PBMB): Bus running at 33MHz PCI0(PBMA): Bus running at 66MHz ebus0: [auxio] [power] [SUNW,pll] [sc] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [SUNW,envctrl] power: Control reg at 1fff1724000 ... not using powerd. AUXIO: Found device at /pci@1f,4000/ebus@1/auxio@14,726000 /pci@1f,4000/ebus@1/eeprom@14,0: Clock regs at 000001fff1000000 NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 65536 bytes) TCP established hash table entries: 32768 (order: 6, 524288 bytes) TCP bind hash table entries: 16384 (order: 5, 262144 bytes) TCP: Hash tables configured (established 32768 bind 16384) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Console: switching to colour frame buffer device 160x64 /SUNW,ffb@1d,0: FFB at 000001fa00000000, type 8, DAC revision 10 rtc_init: no PC rtc found /pci@1f,4000/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 8 /pci@1f,4000/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 9 se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2 se@14,400000: ttyS1 at MMIO 0x1fff1400040 (irq = 7) is a SAB82532 V3.2 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize rtc_sun_init: Registered Mostek RTC driver. mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 2400KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done. VFS: Mounted root (cramfs filesystem) readonly. SCSI subsystem initialized sym0: <875> rev 0x3 at pci 0001:00:02.0 irq 14 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 input: Sun Type 5 keyboard as /class/input/input0 input: Sun Mouse as /class/input/input1 Vendor: TOSHIBA Model: XM5701TASUN12XCD Rev: 0997 Type: CD-ROM ANSI SCSI revision: 02 target0:0:6: Beginning Domain Validation target0:0:6: asynchronous target0:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8) target0:0:6: Domain Validation skipping write tests target0:0:6: Ending Domain Validation sym1: <875> rev 0x3 at pci 0001:00:03.0 irq 13 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: SCSI BUS has been reset. scsi1 : sym-2.2.3 Vendor: SEAGATE Model: ST39102LCSUN9.0G Rev: 0828 Type: Direct-Access ANSI SCSI revision: 02 target1:0:0: tagged command queuing enabled, command queue depth 16. target1:0:0: Beginning Domain Validation target1:0:0: asynchronous target1:0:0: wide asynchronous target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) target1:0:0: Domain Validation skipping write tests target1:0:0: Ending Domain Validation Vendor: SEAGATE Model: ST39102LCSUN9.0G Rev: 0828 Type: Direct-Access ANSI SCSI revision: 02 target1:0:1: tagged command queuing enabled, command queue depth 16. target1:0:1: Beginning Domain Validation target1:0:1: asynchronous target1:0:1: wide asynchronous target1:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) target1:0:1: Domain Validation skipping write tests target1:0:1: Ending Domain Validation Vendor: SEAGATE Model: ST39102LCSUN9.0G Rev: 0828 Type: Direct-Access ANSI SCSI revision: 02 target1:0:2: tagged command queuing enabled, command queue depth 16. target1:0:2: Beginning Domain Validation target1:0:2: asynchronous target1:0:2: wide asynchronous target1:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) target1:0:2: Domain Validation skipping write tests target1:0:2: Ending Domain Validation Vendor: IBM-PSG Model: DNES-318350Y !# Rev: SAB0 Type: Direct-Access ANSI SCSI revision: 03 target1:0:3: tagged command queuing enabled, command queue depth 16. target1:0:3: Beginning Domain Validation target1:0:3: asynchronous target1:0:3: wide asynchronous target1:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) target1:0:3: Domain Validation skipping write tests target1:0:3: Ending Domain Validation scsi 1:0:3:0: phase change 2-3 12@c0038f60 resid=11. sym2: <875> rev 0x14 at pci 0001:00:04.0 irq 15 sym2: No NVRAM, ID 7, Fast-20, SE, parity checking sym2: SCSI BUS has been reset. scsi2 : sym-2.2.3 scsi 2:0:0:0: ABORT operation started. scsi 2:0:0:0: ABORT operation timed-out. scsi 2:0:0:0: DEVICE RESET operation started. scsi 2:0:0:0: DEVICE RESET operation timed-out. scsi 2:0:0:0: BUS RESET operation started. scsi 2:0:0:0: BUS RESET operation timed-out. scsi 2:0:0:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:0:0: HOST RESET operation timed-out. scsi 2:0:0:0: scsi: Device offlined - not ready after error recovery scsi 2:0:1:0: ABORT operation started. scsi 2:0:1:0: ABORT operation timed-out. scsi 2:0:1:0: DEVICE RESET operation started. scsi 2:0:1:0: DEVICE RESET operation timed-out. scsi 2:0:1:0: BUS RESET operation started. scsi 2:0:1:0: BUS RESET operation timed-out. scsi 2:0:1:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:1:0: HOST RESET operation timed-out. scsi 2:0:1:0: scsi: Device offlined - not ready after error recovery scsi 2:0:2:0: ABORT operation started. scsi 2:0:2:0: ABORT operation timed-out. scsi 2:0:2:0: DEVICE RESET operation started. scsi 2:0:2:0: DEVICE RESET operation timed-out. scsi 2:0:2:0: BUS RESET operation started. scsi 2:0:2:0: BUS RESET operation timed-out. scsi 2:0:2:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:2:0: HOST RESET operation timed-out. scsi 2:0:2:0: scsi: Device offlined - not ready after error recovery scsi 2:0:3:0: ABORT operation started. scsi 2:0:3:0: ABORT operation timed-out. scsi 2:0:3:0: DEVICE RESET operation started. scsi 2:0:3:0: DEVICE RESET operation timed-out. scsi 2:0:3:0: BUS RESET operation started. scsi 2:0:3:0: BUS RESET operation timed-out. scsi 2:0:3:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:3:0: HOST RESET operation timed-out. scsi 2:0:3:0: scsi: Device offlined - not ready after error recovery scsi 2:0:4:0: ABORT operation started. scsi 2:0:4:0: ABORT operation timed-out. scsi 2:0:4:0: DEVICE RESET operation started. scsi 2:0:4:0: DEVICE RESET operation timed-out. scsi 2:0:4:0: BUS RESET operation started. scsi 2:0:4:0: BUS RESET operation timed-out. scsi 2:0:4:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:4:0: HOST RESET operation timed-out. scsi 2:0:4:0: scsi: Device offlined - not ready after error recovery scsi 2:0:5:0: ABORT operation started. scsi 2:0:5:0: ABORT operation timed-out. scsi 2:0:5:0: DEVICE RESET operation started. scsi 2:0:5:0: DEVICE RESET operation timed-out. scsi 2:0:5:0: BUS RESET operation started. scsi 2:0:5:0: BUS RESET operation timed-out. scsi 2:0:5:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:5:0: HOST RESET operation timed-out. scsi 2:0:5:0: scsi: Device offlined - not ready after error recovery scsi 2:0:6:0: ABORT operation started. scsi 2:0:6:0: ABORT operation timed-out. scsi 2:0:6:0: DEVICE RESET operation started. scsi 2:0:6:0: DEVICE RESET operation timed-out. scsi 2:0:6:0: BUS RESET operation started. scsi 2:0:6:0: BUS RESET operation timed-out. scsi 2:0:6:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:6:0: HOST RESET operation timed-out. scsi 2:0:6:0: scsi: Device offlined - not ready after error recovery scsi 2:0:8:0: ABORT operation started. scsi 2:0:8:0: ABORT operation timed-out. scsi 2:0:8:0: DEVICE RESET operation started. scsi 2:0:8:0: DEVICE RESET operation timed-out. scsi 2:0:8:0: BUS RESET operation started. scsi 2:0:8:0: BUS RESET operation timed-out. scsi 2:0:8:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:8:0: HOST RESET operation timed-out. scsi 2:0:8:0: scsi: Device offlined - not ready after error recovery scsi 2:0:9:0: ABORT operation started. scsi 2:0:9:0: ABORT operation timed-out. scsi 2:0:9:0: DEVICE RESET operation started. scsi 2:0:9:0: DEVICE RESET operation timed-out. scsi 2:0:9:0: BUS RESET operation started. scsi 2:0:9:0: BUS RESET operation timed-out. scsi 2:0:9:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:9:0: HOST RESET operation timed-out. scsi 2:0:9:0: scsi: Device offlined - not ready after error recovery scsi 2:0:10:0: ABORT operation started. scsi 2:0:10:0: ABORT operation timed-out. scsi 2:0:10:0: DEVICE RESET operation started. scsi 2:0:10:0: DEVICE RESET operation timed-out. scsi 2:0:10:0: BUS RESET operation started. scsi 2:0:10:0: BUS RESET operation timed-out. scsi 2:0:10:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:10:0: HOST RESET operation timed-out. scsi 2:0:10:0: scsi: Device offlined - not ready after error recovery scsi 2:0:11:0: ABORT operation started. scsi 2:0:11:0: ABORT operation timed-out. scsi 2:0:11:0: DEVICE RESET operation started. scsi 2:0:11:0: DEVICE RESET operation timed-out. scsi 2:0:11:0: BUS RESET operation started. scsi 2:0:11:0: BUS RESET operation timed-out. scsi 2:0:11:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:11:0: HOST RESET operation timed-out. scsi 2:0:11:0: scsi: Device offlined - not ready after error recovery scsi 2:0:12:0: ABORT operation started. scsi 2:0:12:0: ABORT operation timed-out. scsi 2:0:12:0: DEVICE RESET operation started. scsi 2:0:12:0: DEVICE RESET operation timed-out. scsi 2:0:12:0: BUS RESET operation started. scsi 2:0:12:0: BUS RESET operation timed-out. scsi 2:0:12:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:12:0: HOST RESET operation timed-out. scsi 2:0:12:0: scsi: Device offlined - not ready after error recovery scsi 2:0:13:0: ABORT operation started. scsi 2:0:13:0: ABORT operation timed-out. scsi 2:0:13:0: DEVICE RESET operation started. scsi 2:0:13:0: DEVICE RESET operation timed-out. scsi 2:0:13:0: BUS RESET operation started. scsi 2:0:13:0: BUS RESET operation timed-out. scsi 2:0:13:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:13:0: HOST RESET operation timed-out. scsi 2:0:13:0: scsi: Device offlined - not ready after error recovery scsi 2:0:14:0: ABORT operation started. scsi 2:0:14:0: ABORT operation timed-out. scsi 2:0:14:0: DEVICE RESET operation started. scsi 2:0:14:0: DEVICE RESET operation timed-out. scsi 2:0:14:0: BUS RESET operation started. scsi 2:0:14:0: BUS RESET operation timed-out. scsi 2:0:14:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:14:0: HOST RESET operation timed-out. scsi 2:0:14:0: scsi: Device offlined - not ready after error recovery scsi 2:0:15:0: ABORT operation started. scsi 2:0:15:0: ABORT operation timed-out. scsi 2:0:15:0: DEVICE RESET operation started. scsi 2:0:15:0: DEVICE RESET operation timed-out. scsi 2:0:15:0: BUS RESET operation started. scsi 2:0:15:0: BUS RESET operation timed-out. scsi 2:0:15:0: HOST RESET operation started. sym2: SCSI BUS has been reset. scsi 2:0:15:0: HOST RESET operation timed-out. scsi 2:0:15:0: scsi: Device offlined - not ready after error recovery sym3: <875> rev 0x14 at pci 0001:00:04.1 irq 16 sym3: No NVRAM, ID 7, Fast-20, SE, parity checking sym3: SCSI BUS has been reset. scsi3 : sym-2.2.3 scsi 3:0:0:0: ABORT operation started. scsi 3:0:0:0: ABORT operation timed-out. scsi 3:0:0:0: DEVICE RESET operation started. scsi 3:0:0:0: DEVICE RESET operation timed-out. scsi 3:0:0:0: BUS RESET operation started. scsi 3:0:0:0: BUS RESET operation timed-out. scsi 3:0:0:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:0:0: HOST RESET operation timed-out. scsi 3:0:0:0: scsi: Device offlined - not ready after error recovery scsi 3:0:1:0: ABORT operation started. scsi 3:0:1:0: ABORT operation timed-out. scsi 3:0:1:0: DEVICE RESET operation started. scsi 3:0:1:0: DEVICE RESET operation timed-out. scsi 3:0:1:0: BUS RESET operation started. scsi 3:0:1:0: BUS RESET operation timed-out. scsi 3:0:1:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:1:0: HOST RESET operation timed-out. scsi 3:0:1:0: scsi: Device offlined - not ready after error recovery scsi 3:0:2:0: ABORT operation started. scsi 3:0:2:0: ABORT operation timed-out. scsi 3:0:2:0: DEVICE RESET operation started. scsi 3:0:2:0: DEVICE RESET operation timed-out. scsi 3:0:2:0: BUS RESET operation started. scsi 3:0:2:0: BUS RESET operation timed-out. scsi 3:0:2:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:2:0: HOST RESET operation timed-out. scsi 3:0:2:0: scsi: Device offlined - not ready after error recovery scsi 3:0:3:0: ABORT operation started. scsi 3:0:3:0: ABORT operation timed-out. scsi 3:0:3:0: DEVICE RESET operation started. scsi 3:0:3:0: DEVICE RESET operation timed-out. scsi 3:0:3:0: BUS RESET operation started. scsi 3:0:3:0: BUS RESET operation timed-out. scsi 3:0:3:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:3:0: HOST RESET operation timed-out. scsi 3:0:3:0: scsi: Device offlined - not ready after error recovery scsi 3:0:4:0: ABORT operation started. scsi 3:0:4:0: ABORT operation timed-out. scsi 3:0:4:0: DEVICE RESET operation started. scsi 3:0:4:0: DEVICE RESET operation timed-out. scsi 3:0:4:0: BUS RESET operation started. scsi 3:0:4:0: BUS RESET operation timed-out. scsi 3:0:4:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:4:0: HOST RESET operation timed-out. scsi 3:0:4:0: scsi: Device offlined - not ready after error recovery scsi 3:0:5:0: ABORT operation started. scsi 3:0:5:0: ABORT operation timed-out. scsi 3:0:5:0: DEVICE RESET operation started. scsi 3:0:5:0: DEVICE RESET operation timed-out. scsi 3:0:5:0: BUS RESET operation started. scsi 3:0:5:0: BUS RESET operation timed-out. scsi 3:0:5:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:5:0: HOST RESET operation timed-out. scsi 3:0:5:0: scsi: Device offlined - not ready after error recovery scsi 3:0:6:0: ABORT operation started. scsi 3:0:6:0: ABORT operation timed-out. scsi 3:0:6:0: DEVICE RESET operation started. scsi 3:0:6:0: DEVICE RESET operation timed-out. scsi 3:0:6:0: BUS RESET operation started. scsi 3:0:6:0: BUS RESET operation timed-out. scsi 3:0:6:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:6:0: HOST RESET operation timed-out. scsi 3:0:6:0: scsi: Device offlined - not ready after error recovery scsi 3:0:8:0: ABORT operation started. scsi 3:0:8:0: ABORT operation timed-out. scsi 3:0:8:0: DEVICE RESET operation started. scsi 3:0:8:0: DEVICE RESET operation timed-out. scsi 3:0:8:0: BUS RESET operation started. scsi 3:0:8:0: BUS RESET operation timed-out. scsi 3:0:8:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:8:0: HOST RESET operation timed-out. scsi 3:0:8:0: scsi: Device offlined - not ready after error recovery scsi 3:0:9:0: ABORT operation started. scsi 3:0:9:0: ABORT operation timed-out. scsi 3:0:9:0: DEVICE RESET operation started. scsi 3:0:9:0: DEVICE RESET operation timed-out. scsi 3:0:9:0: BUS RESET operation started. scsi 3:0:9:0: BUS RESET operation timed-out. scsi 3:0:9:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:9:0: HOST RESET operation timed-out. scsi 3:0:9:0: scsi: Device offlined - not ready after error recovery scsi 3:0:10:0: ABORT operation started. scsi 3:0:10:0: ABORT operation timed-out. scsi 3:0:10:0: DEVICE RESET operation started. scsi 3:0:10:0: DEVICE RESET operation timed-out. scsi 3:0:10:0: BUS RESET operation started. scsi 3:0:10:0: BUS RESET operation timed-out. scsi 3:0:10:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:10:0: HOST RESET operation timed-out. scsi 3:0:10:0: scsi: Device offlined - not ready after error recovery scsi 3:0:11:0: ABORT operation started. scsi 3:0:11:0: ABORT operation timed-out. scsi 3:0:11:0: DEVICE RESET operation started. scsi 3:0:11:0: DEVICE RESET operation timed-out. scsi 3:0:11:0: BUS RESET operation started. scsi 3:0:11:0: BUS RESET operation timed-out. scsi 3:0:11:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:11:0: HOST RESET operation timed-out. scsi 3:0:11:0: scsi: Device offlined - not ready after error recovery scsi 3:0:12:0: ABORT operation started. scsi 3:0:12:0: ABORT operation timed-out. scsi 3:0:12:0: DEVICE RESET operation started. scsi 3:0:12:0: DEVICE RESET operation timed-out. scsi 3:0:12:0: BUS RESET operation started. scsi 3:0:12:0: BUS RESET operation timed-out. scsi 3:0:12:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:12:0: HOST RESET operation timed-out. scsi 3:0:12:0: scsi: Device offlined - not ready after error recovery scsi 3:0:13:0: ABORT operation started. scsi 3:0:13:0: ABORT operation timed-out. scsi 3:0:13:0: DEVICE RESET operation started. scsi 3:0:13:0: DEVICE RESET operation timed-out. scsi 3:0:13:0: BUS RESET operation started. scsi 3:0:13:0: BUS RESET operation timed-out. scsi 3:0:13:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:13:0: HOST RESET operation timed-out. scsi 3:0:13:0: scsi: Device offlined - not ready after error recovery scsi 3:0:14:0: ABORT operation started. scsi 3:0:14:0: ABORT operation timed-out. scsi 3:0:14:0: DEVICE RESET operation started. scsi 3:0:14:0: DEVICE RESET operation timed-out. scsi 3:0:14:0: BUS RESET operation started. scsi 3:0:14:0: BUS RESET operation timed-out. scsi 3:0:14:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:14:0: HOST RESET operation timed-out. scsi 3:0:14:0: scsi: Device offlined - not ready after error recovery scsi 3:0:15:0: ABORT operation started. scsi 3:0:15:0: ABORT operation timed-out. scsi 3:0:15:0: DEVICE RESET operation started. scsi 3:0:15:0: DEVICE RESET operation timed-out. scsi 3:0:15:0: BUS RESET operation started. scsi 3:0:15:0: BUS RESET operation timed-out. scsi 3:0:15:0: HOST RESET operation started. sym3: SCSI BUS has been reset. scsi 3:0:15:0: HOST RESET operation timed-out. scsi 3:0:15:0: scsi: Device offlined - not ready after error recovery scsi 0:0:6:0: Attached scsi generic sg0 type 5 scsi 1:0:0:0: Attached scsi generic sg1 type 0 scsi 1:0:1:0: Attached scsi generic sg2 type 0 scsi 1:0:2:0: Attached scsi generic sg3 type 0 scsi 1:0:3:0: Attached scsi generic sg4 type 0 SCSI device sda: 17689267 512-byte hdwr sectors (9057 MB) sda: Write Protect is off sda: Mode Sense: cf 00 10 08 SCSI device sda: drive cache: write through w/ FUA SCSI device sda: 17689267 512-byte hdwr sectors (9057 MB) sda: Write Protect is off sda: Mode Sense: cf 00 10 08 SCSI device sda: drive cache: write through w/ FUA sda: sda1 sda2 sda3 sd 1:0:0:0: Attached scsi disk sda SCSI device sdb: 17689267 512-byte hdwr sectors (9057 MB) sdb: Write Protect is off sdb: Mode Sense: cf 00 10 08 SCSI device sdb: drive cache: write through w/ FUA SCSI device sdb: 17689267 512-byte hdwr sectors (9057 MB) sdb: Write Protect is off sdb: Mode Sense: cf 00 10 08 SCSI device sdb: drive cache: write through w/ FUA sdb: sdb1 sdb3 sd 1:0:1:0: Attached scsi disk sdb SCSI device sdc: 17689267 512-byte hdwr sectors (9057 MB) sdc: Write Protect is off sdc: Mode Sense: cf 00 10 08 SCSI device sdc: drive cache: write through w/ FUA SCSI device sdc: 17689267 512-byte hdwr sectors (9057 MB) sdc: Write Protect is off sdc: Mode Sense: cf 00 10 08 SCSI device sdc: drive cache: write through w/ FUA sdc: sdc1 sdc3 sd 1:0:2:0: Attached scsi disk sdc SCSI device sdd: 35548320 512-byte hdwr sectors (18201 MB) sdd: Write Protect is off sdd: Mode Sense: c3 00 00 08 SCSI device sdd: drive cache: write through SCSI device sdd: 35548320 512-byte hdwr sectors (18201 MB) sdd: Write Protect is off sdd: Mode Sense: c3 00 00 08 SCSI device sdd: drive cache: write through sdd: sdd1 sd 1:0:3:0: Attached scsi disk sdd sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sr 0:0:6:0: Attached scsi CD-ROM sr0 sunhme.c:v3.00 June 23, 2006 David S. Miller (davem@davemloft.net) eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:90:ca:21 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 8648688k swap on /dev/sda2. Priority:-1 extents:1 across:8648688k EXT3 FS on sdb1, internal journal i2c-algo-pcf.o: deteted and initialized PCF8584. i2c-envctrl: SUNW,envctrl PCF8584 bus nexus at 0x1fff1600000 envctrl: unexpected cpu-temp-factors table size (is 1062468864, expected 254) envctrl: using default cpu-temp-factors table envctrl: unexpected ps-temp-factors table size (is 112, expected 254) envctrl: using default ps-temp-factors table Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 00000000000003ff tsk->{mm,active_mm}->pgd = fffff8003f43a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ modprobe(1647): Oops [#1] TSTATE: 0000001111009602 TPC: 00000000100f2470 TNPC: 00000000100f2498 Y: 00000000 Not tainted TPC: g0: 00000000100ee140 g1: 0000000000000070 g2: fffffffffffffffa g3: 000000006e000000 g4: fffff80000e27640 g5: fffff8000039fa00 g6: fffff8003f53c000 g7: 0000000000000000 o0: 0000000000000000 o1: 00000000100ea428 o2: fffff8003f53fd0c o3: 000008000f6753f0 o4: 00000000100ee530 o5: 3f3f3f3f3f3f3f3f sp: fffff8003f53f451 ret_pc: 00000000100f245c RPC: l0: 00000000100ee400 l1: 00000000007299f8 l2: 0000000000000000 l3: 00000000100ee400 l4: 000000000066cc00 l5: 0000000000000001 l6: 0000000000000000 l7: 0000000000000008 i0: 0000000000000000 i1: 00000000100e3918 i2: 0000000000000001 i3: 0000000100225570 i4: 0000000000000000 i5: 0000000000000015 i6: fffff8003f53f521 i7: 00000000100f2a84 I7: Caller[00000000100f2a84]: env_init+0x90/0x234 [envctrl] Caller[000000000046eb88]: sys_init_module+0xac/0x19c Caller[0000000000406bd4]: linux_sparc_syscall32+0x3c/0x40 Caller[0000000000012758]: 0x12760 Instruction DUMP: c207a7eb 80a07fff 3248000b 110403a9 130403a9 901223f8 7c0d74eb 92126088 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 md: md0 stopped. md: bind kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: md0: warning: sh-2006: read_super_block: bread failed (dev md0, block 1, size 8192) ReiserFS: md0: warning: sh-2006: read_super_block: bread failed (dev md0, block 8, size 8192) ReiserFS: md0: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on md0 Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 00000000000005d7 tsk->{mm,active_mm}->pgd = fffff8003fd2a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ discover(1950): Oops [#2] TSTATE: 0000004411009606 TPC: 000000000042769c TNPC: 00000000004276a0 Y: 00000000 Not tainted TPC: g0: fffff8003f89f231 g1: 0000000020004f07 g2: 0000000020004c00 g3: 0000000000000f7c g4: fffff8003ef2ba00 g5: fffff8000039fa00 g6: fffff8003f89c000 g7: 0000000000000000 o0: fffff80000000b00 o1: 00000000000000d0 o2: 0000000001010101 o3: 0000000080808080 o4: 0000000070636900 o5: 0000000073627573 sp: fffff8003f89f1f1 ret_pc: 00000000f7f24db0 RPC: <0xf7f24db8> l0: 000000000000058c l1: 00000000f7f294a0 l2: 00000000f7f3af78 l3: 0000000000000000 l4: 0000000000000000 l5: 0000000000000000 l6: 0000000000000000 l7: 00000000f7f3a7ac i0: 0000000000000000 i1: fffff8003eb67004 i2: fffff8003f89fc2c i3: fffff8003eb67000 i4: 0000000000000000 i5: 000000000000005a i6: fffff8003f89f2b1 i7: 00000000004276f4 I7: Caller[00000000004276f4]: of_get_property+0x18/0x28 Caller[000000000057d860]: opromgetprop+0x18/0x88 Caller[000000000057dc8c]: openprom_sunos_ioctl+0x12c/0x244 Caller[000000000057e5bc]: openprom_compat_ioctl+0x54/0x5c Caller[00000000004c4d44]: compat_sys_ioctl+0xfc/0x280 Caller[0000000000406bd4]: linux_sparc_syscall32+0x3c/0x40 Caller[00000000f7f24d54]: 0xf7f24d5c Instruction DUMP: 81cfe008 01000000 9de3bf40 02c6000f 01000000 d05e0000 4003f649 92100019 eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex. NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present Installing knfsd (copyright (C) 1996 okir@monad.swb.de). program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO