linux-kernel - Re: cpufreq stops working after a while

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20060824161514.GA19753@srcf.ucam.org>
Date:	Thu, 24 Aug 2006 17:15:14 +0100
From:	Matthew Garrett <mjg59@...f.ucam.org>
To:	Mark Lord <lkml@....ca>
Cc:	Pavel Machek <pavel@....cz>,
	"Pallipadi, Venkatesh" <venkatesh.pallipadi@...el.com>,
	Dave Jones <davej@...hat.com>,
	Linux Kernel <linux-kernel@...r.kernel.org>,
	Andrew Morton <akpm@...l.org>
Subject: Re: cpufreq stops working after a while

On Thu, Aug 24, 2006 at 10:44:28AM -0400, Mark Lord wrote:

> By definition, "passive" cooling never needs enabling -- this just refers
> to things like heat sinks and air vents.

In ACPI terms, passive cooling is forced downthrottling of the CPU in 
order to reduce heat generation. This is normally done if the 
temperature is continuing to rise despite active cooling being enabled.

On some hardware you can set the values at which different types of 
cooling will be enabled in /proc/acpi/thermal_zone/*/trip_points. Echo a 
colon separated list of values in there to rewrite them. Some BIOSes 
will change the trip points in response to various events, which will 
then overwrite your values.

-- 
Matthew Garrett | mjg59@...f.ucam.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/