Message-ID: <20060828035426.GB3819@sortiz.org>
Date:	Mon, 28 Aug 2006 06:54:26 +0300
From:	Samuel Ortiz <samuel@...tiz.org>
To:	Komal Shah <komal_shah802003@...oo.com>
Cc:	linux-kernel@...r.kernel.org, tony@...mide.com,
	irda-users@...ts.sourceforge.net
Subject: Re: [irda-users] [PATCH] OMAP: Add support for IrDA driver #2

Hi Komal,

On Wed, Aug 16, 2006 at 03:13:10PM +0530, Komal Shah wrote:
> Samuel/Tony,
> 
> I have attached the updated OMAP IrDA patch for OMAP1610/1710 and OMAP242x
> for review. See that for IrDA driver to work on H3 and H4, we need
> gpio-expander functions to go in mainline, but it can work on H2.
> 
> I have addressed your review comments as per the following thread,
This looks good to me.
Acked-by: Samuel Ortiz <samuel@...tiz.org>

Cheers,
Samuel.




> http://lkml.org/lkml/2006/8/10/556 
> 
> except for dma channels.
> 
> ---Komal Shah
> http://komalshah.blogspot.com
> 
> -- 
> http://www.fastmail.fm - Send your email first class
> 

> From nobody Mon Sep 17 00:00:00 2001
> From: Komal Shah <komal_shah802003@...oo.com>
> Date: Wed, 16 Aug 2006 20:36:29 +0530
> Subject: [PATCH] OMAP: Add support for IrDA driver #2
> 
> Patch adds IrDA driver support for Texas Instruments OMAP
> (http://www.ti.com/omap) based processors like OMAP1610/1710 and OMAP242x.
> 
> Signed-off-by: Komal Shah <komal_shah802003@...oo.com>
> 
> ---
> 
>  drivers/net/irda/Kconfig   |   10 
>  drivers/net/irda/Makefile  |    1 
>  drivers/net/irda/omap-ir.c |  904 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 915 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/net/irda/omap-ir.c
> 
> 27da3dbdbd7eb4f22237e4e452d08df929010c7c
> diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
> index e9e6d99..88f2c66 100644
> --- a/drivers/net/irda/Kconfig
> +++ b/drivers/net/irda/Kconfig
> @@ -432,5 +432,15 @@ config MCS_FIR
>  	  To compile it as a module, choose M here: the module will be called
>  	  mcs7780.
>  
> +config OMAP_IR
> +	tristate "OMAP IrDA(SIR/MIR/FIR)"
> +	depends on IRDA && ARCH_OMAP
> +	select GPIOEXPANDER_OMAP if (MACH_OMAP_H3 || MACH_OMAP_H4)
> +        help
> +	  Say Y here if you want to build support for the Texas Instruments
> +	  OMAP IrDA device driver, which supports SIR/MIR/FIR. This driver
> +	  relies on platform specific helper routines so available capabilities
> +	  may vary from one OMAP target to another.
> +
>  endmenu
>  
> diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
> index 5be09f1..89c6389 100644
> --- a/drivers/net/irda/Makefile
> +++ b/drivers/net/irda/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_VLSI_FIR)		+= vlsi_ir.o
>  obj-$(CONFIG_VIA_FIR)		+= via-ircc.o
>  obj-$(CONFIG_PXA_FICP)	        += pxaficp_ir.o
>  obj-$(CONFIG_MCS_FIR)	        += mcs7780.o
> +obj-$(CONFIG_OMAP_IR)		+= omap-ir.o
>  # Old dongle drivers for old SIR drivers
>  obj-$(CONFIG_ESI_DONGLE_OLD)		+= esi.o
>  obj-$(CONFIG_TEKRAM_DONGLE_OLD)	+= tekram.o
> diff --git a/drivers/net/irda/omap-ir.c b/drivers/net/irda/omap-ir.c
> new file mode 100644
> index 0000000..e3dc0d6
> --- /dev/null
> +++ b/drivers/net/irda/omap-ir.c
> @@ -0,0 +1,904 @@
> +/*
> + * BRIEF MODULE DESCRIPTION
> + *
> + *	Infra-red driver for the OMAP1610-H2 and OMAP1710-H3 and H4 Platforms
> + *	  (SIR/MIR/FIR modes)
> + *	  (based on omap-sir.c)
> + *
> + * Copyright 2003 MontaVista Software Inc.
> + * Author: MontaVista Software, Inc.
> + *	   source@...sta.com
> + *
> + * Copyright 2004 Texas Instruments.
> + *
> + *  This program is free software; you can redistribute	 it and/or modify it
> + *  under  the terms of	 the GNU General  Public License as published by the
> + *  Free Software Foundation;  either version 2 of the	License, or (at your
> + *  option) any later version.
> + *
> + *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
> + *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
> + *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
> + *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
> + *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
> + *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> + *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
> + *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + *  You should have received a copy of the  GNU General Public License along
> + *  with this program; if not, write  to the Free Software Foundation, Inc.,
> + *  675 Mass Ave, Cambridge, MA 02139, USA.
> + *
> + Modifications:
> + Feb 2004, Texas Instruments
> + - Ported to 2.6 kernel (Feb 2004).
> + *
> + Apr 2004, Texas Instruments
> + - Added support for H3 (Apr 2004).
> + Nov 2004, Texas Instruments
> + - Added support for Power Management.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/netdevice.h>
> +#include <linux/slab.h>
> +#include <linux/rtnetlink.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/ioport.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/platform_device.h>
> +#include <linux/i2c.h>
> +
> +#include <net/irda/irda.h>
> +#include <net/irda/irmod.h>
> +#include <net/irda/wrapper.h>
> +#include <net/irda/irda_device.h>
> +
> +#include <asm/irq.h>
> +#include <asm/io.h>
> +#include <asm/hardware.h>
> +#include <asm/serial.h>
> +#include <asm/mach-types.h>
> +#include <asm/dma.h>
> +#include <asm/arch/mux.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/irda.h>
> +
> +#define UART3_EFR_EN			(1 << 4)
> +#define UART3_MCR_EN_TCR_TLR		(1 << 6)
> +
> +#define UART3_LCR_WL_8			(3 << 0)
> +#define UART3_LCR_SP2			(1 << 2)
> +#define UART3_LCR_DIVEN			(1 << 7)
> +
> +#define UART3_FCR_FIFO_EN		(1 << 0)
> +#define UART3_FCR_FIFO_RX		(1 << 1)
> +#define UART3_FCR_FIFO_TX		(1 << 2)
> +#define UART3_FCR_FIFO_DMA1		(1 << 3)
> +#define UART3_FCR_FIFO_TX_TRIG16	(1 << 4)
> +#define UART3_FCR_FIFO_RX_TRIG16	(1 << 6)
> +#define UART3_FCR_CONFIG	(\
> +		UART3_FCR_FIFO_EN | UART3_FCR_FIFO_RX	|\
> +		UART3_FCR_FIFO_TX | UART3_FCR_FIFO_DMA1 |\
> +		UART3_FCR_FIFO_TX_TRIG16		|\
> +		UART3_FCR_FIFO_RX_TRIG16)
> +
> +#define UART3_SCR_TX_TRIG1		(1 << 6)
> +#define UART3_SCR_RX_TRIG1		(1 << 7)
> +
> +#define UART3_MDR1_RESET		(0x07)
> +#define UART3_MDR1_SIR			(1 << 0)
> +#define UART3_MDR1_MIR			(4 << 0)
> +#define UART3_MDR1_FIR			(5 << 0)
> +#define UART3_MDR1_SIP_AUTO		(1 << 6)
> +
> +#define UART3_MDR2_TRIG1		(0 << 1)
> +#define UART3_MDR2_IRTX_UNDERRUN	(1 << 0)
> +
> +#define UART3_ACERG_TX_UNDERRUN_DIS	(1 << 4)
> +#define UART3_ACERG_SD_MODE_LOW		(1 << 6)
> +#define UART3_ACERG_DIS_IR_RX		(1 << 5)
> +
> +#define UART3_IER_EOF			(1 << 5)
> +#define UART3_IER_CTS			(1 << 7)
> +
> +#define UART3_IIR_TX_STATUS		(1 << 5)
> +#define UART3_IIR_EOF			(0x80)
> +
> +#define IS_FIR(omap_ir)		((omap_ir)->speed >= 4000000)
> +
> +struct omap_irda {
> +	unsigned char open;
> +	int speed;		/* Current IrDA speed */
> +	int newspeed;
> +
> +	struct net_device_stats stats;
> +	struct irlap_cb *irlap;
> +	struct qos_info qos;
> +
> +	int rx_dma_channel;
> +	int tx_dma_channel;
> +
> +	dma_addr_t rx_buf_dma_phys;	/* Physical address of RX DMA buffer */
> +	dma_addr_t tx_buf_dma_phys;	/* Physical address of TX DMA buffer */
> +
> +	void *rx_buf_dma_virt;		/* Virtual address of RX DMA buffer */
> +	void *tx_buf_dma_virt;		/* Virtual address of TX DMA buffer */
> +
> +	struct device *dev;
> +	struct omap_irda_config *pdata;
> +};
> +
> +static void inline uart_reg_out(int idx, u8 val)
> +{
> +	omap_writeb(val, idx);
> +}
> +
> +static u8 inline uart_reg_in(int idx)
> +{
> +	u8 b = omap_readb(idx);
> +	return b;
> +}
> +
> +/* forward declarations */
> +extern void omap_stop_dma(int lch);
> +static int omap_irda_set_speed(struct net_device *dev, int speed);
> +
> +static void omap_irda_start_rx_dma(struct omap_irda *omap_ir)
> +{
> +	/* Configure DMA */
> +	omap_set_dma_src_params(omap_ir->rx_dma_channel, 0x3, 0x0,
> +				omap_ir->pdata->src_start,
> +				0, 0);
> +
> +	omap_enable_dma_irq(omap_ir->rx_dma_channel, 0x01);
> +
> +	omap_set_dma_dest_params(omap_ir->rx_dma_channel, 0x0, 0x1,
> +				omap_ir->rx_buf_dma_phys,
> +				0, 0);
> +
> +	omap_set_dma_transfer_params(omap_ir->rx_dma_channel, 0x0,
> +				IRDA_SKB_MAX_MTU, 0x1,
> +				0x0, omap_ir->pdata->rx_trigger, 0);
> +
> +	omap_start_dma(omap_ir->rx_dma_channel);
> +}
> +
> +static void omap_start_tx_dma(struct omap_irda *omap_ir, int size)
> +{
> +	/* Configure DMA */
> +	omap_set_dma_dest_params(omap_ir->tx_dma_channel, 0x03, 0x0,
> +				omap_ir->pdata->dest_start, 0, 0);
> +
> +	omap_enable_dma_irq(omap_ir->tx_dma_channel, 0x01);
> +
> +	omap_set_dma_src_params(omap_ir->tx_dma_channel, 0x0, 0x1,
> +				omap_ir->tx_buf_dma_phys,
> +				0, 0);
> +
> +	omap_set_dma_transfer_params(omap_ir->tx_dma_channel, 0x0, size, 0x1,
> +				0x0, omap_ir->pdata->tx_trigger, 0);
> +
> +	/* Start DMA */
> +	omap_start_dma(omap_ir->tx_dma_channel);
> +}
> +
> +/* DMA RX callback - normally, we should not go here,
> + * it calls only if something is going wrong
> + */
> +static void omap_irda_rx_dma_callback(int lch, u16 ch_status, void *data)
> +{
> +	struct net_device *dev = data;
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +
> +	printk(KERN_ERR "RX Transfer error or very big frame\n");
> +
> +	/* Clear interrupts */
> +	uart_reg_in(UART3_IIR);
> +
> +	omap_ir->stats.rx_frame_errors++;
> +
> +	uart_reg_in(UART3_RESUME);
> +
> +	/* Re-init RX DMA */
> +	omap_irda_start_rx_dma(omap_ir);
> +}
> +
> +/* DMA TX callback - calling when frame transfer has been finished */
> +static void omap_irda_tx_dma_callback(int lch, u16 ch_status, void *data)
> +{
> +	struct net_device *dev = data;
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +
> +	/*Stop DMA controller */
> +	omap_stop_dma(omap_ir->tx_dma_channel);
> +}
> +
> +/*
> + * Set the IrDA communications speed.
> + * Interrupt have to be disabled here.
> + */
> +static int omap_irda_startup(struct net_device *dev)
> +{
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +
> +	/* FIXME: use clk_* apis for UART3 clock*/
> +	/* Enable UART3 clock and set UART3 to IrDA mode */
> +	if (machine_is_omap_h2() || machine_is_omap_h3())
> +		omap_writel(omap_readl(MOD_CONF_CTRL_0) | (1 << 31) | (1 << 15),
> +				MOD_CONF_CTRL_0);
> +
> +	/* Only for H2?
> +	 */
> +	if (omap_ir->pdata->transceiver_mode && machine_is_omap_h2()) {
> +		/* Is it select_irda on H2 ? */
> +		omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7,
> +					FUNC_MUX_CTRL_A);
> +		omap_ir->pdata->transceiver_mode(omap_ir->dev, IR_SIRMODE);
> +	}
> +
> +	uart_reg_out(UART3_MDR1, UART3_MDR1_RESET);	/* Reset mode */
> +
> +	/* Clear DLH and DLL */
> +	uart_reg_out(UART3_LCR, UART3_LCR_DIVEN);
> +
> +	uart_reg_out(UART3_DLL, 0);
> +	uart_reg_out(UART3_DLH, 0);
> +	uart_reg_out(UART3_LCR, 0xbf);	/* FIXME: Add #define */
> +
> +	uart_reg_out(UART3_EFR, UART3_EFR_EN);
> +	uart_reg_out(UART3_LCR, UART3_LCR_DIVEN);
> +
> +	/* Enable access to UART3_TLR and UART3_TCR registers */
> +	uart_reg_out(UART3_MCR, UART3_MCR_EN_TCR_TLR);
> +
> +	uart_reg_out(UART3_SCR, 0);
> +	/* Set Rx trigger to 1 and Tx trigger to 1 */
> +	uart_reg_out(UART3_TLR, 0);
> +
> +	/* Set LCR to 8 bits and 1 stop bit */
> +	uart_reg_out(UART3_LCR, 0x03);
> +
> +	/* Clear RX and TX FIFO and enable FIFO */
> +	/* Use DMA Req for transfers */
> +	uart_reg_out(UART3_FCR, UART3_FCR_CONFIG);
> +
> +	uart_reg_out(UART3_MCR, 0);
> +
> +	uart_reg_out(UART3_SCR, UART3_SCR_TX_TRIG1 |
> +			UART3_SCR_RX_TRIG1);
> +
> +	/* Enable UART3 SIR Mode,(Frame-length method to end frames) */
> +	uart_reg_out(UART3_MDR1, UART3_MDR1_SIR);
> +
> +	/* Set Status FIFO trig to 1 */
> +	uart_reg_out(UART3_MDR2, 0);
> +
> +	/* Enables RXIR input */
> +	/* and disable TX underrun */
> +	/* SEND_SIP pulse */
> +	uart_reg_out(UART3_ACREG, UART3_ACERG_SD_MODE_LOW |
> +			UART3_ACERG_TX_UNDERRUN_DIS);
> +
> +	/* Enable EOF Interrupt only */
> +	uart_reg_out(UART3_IER, UART3_IER_CTS | UART3_IER_EOF);
> +
> +	/* Set Maximum Received Frame size to 2048 bytes */
> +	uart_reg_out(UART3_RXFLL, 0x00);
> +	uart_reg_out(UART3_RXFLH, 0x08);
> +
> +	uart_reg_in(UART3_RESUME);
> +
> +	return 0;
> +}
> +
> +static int omap_irda_shutdown(struct omap_irda *omap_ir)
> +{
> +	unsigned long flags;
> +
> +	local_irq_save(flags);
> +
> +	/* Disable all UART3 Interrupts */
> +	uart_reg_out(UART3_IER, 0);
> +
> +	/* Disable UART3 and disable baud rate generator */
> +	uart_reg_out(UART3_MDR1, UART3_MDR1_RESET);
> +
> +	/* set SD_MODE pin to high and Disable RX IR */
> +	uart_reg_out(UART3_ACREG, (UART3_ACERG_DIS_IR_RX |
> +			~(UART3_ACERG_SD_MODE_LOW)));
> +
> +	/* Clear DLH and DLL */
> +	uart_reg_out(UART3_LCR, UART3_LCR_DIVEN);
> +	uart_reg_out(UART3_DLL, 0);
> +	uart_reg_out(UART3_DLH, 0);
> +
> +	local_irq_restore(flags);
> +
> +	return 0;
> +}
> +
> +static irqreturn_t
> +omap_irda_irq(int irq, void *dev_id, struct pt_regs *hw_regs)
> +{
> +	struct net_device *dev = dev_id;
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +	struct sk_buff *skb;
> +
> +	u8 status;
> +	int w = 0;
> +
> +	/* Clear EOF interrupt */
> +	status = uart_reg_in(UART3_IIR);
> +
> +	if (status & UART3_IIR_TX_STATUS) {
> +		u8 mdr2 = uart_reg_in(UART3_MDR2);
> +		if (mdr2 & UART3_MDR2_IRTX_UNDERRUN)
> +			printk(KERN_ERR "IrDA Buffer underrun error\n");
> +
> +		omap_ir->stats.tx_packets++;
> +
> +		if (omap_ir->newspeed) {
> +			omap_irda_set_speed(dev, omap_ir->newspeed);
> +			omap_ir->newspeed = 0;
> +		}
> +
> +		netif_wake_queue(dev);
> +		if (!(status & UART3_IIR_EOF))
> +			return IRQ_HANDLED;
> +	}
> +
> +	/* Stop DMA and if there are no errors, send frame to upper layer */
> +	omap_stop_dma(omap_ir->rx_dma_channel);
> +
> +	status = uart_reg_in(UART3_SFLSR);	/* Take a frame status */
> +
> +	if (status != 0) {	/* Bad frame? */
> +		omap_ir->stats.rx_frame_errors++;
> +		uart_reg_in(UART3_RESUME);
> +	} else {
> +		/* We got a frame! */
> +		skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
> +
> +		if (!skb) {
> +			printk(KERN_ERR "omap_sir: out of memory for RX SKB\n");
> +			return IRQ_HANDLED;
> +		}
> +		/*
> +		 * Align any IP headers that may be contained
> +		 * within the frame.
> +		 */
> +
> +		skb_reserve(skb, 1);
> +
> +		w = OMAP_DMA_CDAC_REG(omap_ir->rx_dma_channel);
> +
> +		if (cpu_is_omap16xx())
> +			w -= OMAP1_DMA_CDSA_L_REG(omap_ir->rx_dma_channel);
> +		if (cpu_is_omap24xx())
> +			w -= OMAP2_DMA_CDSA_REG(omap_ir->rx_dma_channel);
> +
> +		if (!IS_FIR(omap_ir))
> +			/* Copy DMA buffer to skb */
> +			memcpy(skb_put(skb, w - 2), omap_ir->rx_buf_dma_virt,
> +					w - 2);
> +		else
> +			/* Copy DMA buffer to skb */
> +			memcpy(skb_put(skb, w - 4), omap_ir->rx_buf_dma_virt,
> +					w - 4);
> +
> +		skb->dev = dev;
> +		skb->mac.raw = skb->data;
> +		skb->protocol = htons(ETH_P_IRDA);
> +		omap_ir->stats.rx_packets++;
> +		omap_ir->stats.rx_bytes += skb->len;
> +		netif_receive_skb(skb);	/* Send data to upper level */
> +	}
> +
> +	/* Re-init RX DMA */
> +	omap_irda_start_rx_dma(omap_ir);
> +
> +	dev->last_rx = jiffies;
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int omap_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
> +{
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +	int speed = irda_get_next_speed(skb);
> +	int mtt = irda_get_mtt(skb);
> +	int xbofs = irda_get_next_xbofs(skb);
> +
> +
> +	/*
> +	 * Does this packet contain a request to change the interface
> +	 * speed?  If so, remember it until we complete the transmission
> +	 * of this frame.
> +	 */
> +	if (speed != omap_ir->speed && speed != -1)
> +		omap_ir->newspeed = speed;
> +
> +	if (xbofs) /* Set number of addtional BOFS */
> +		uart_reg_out(UART3_EBLR, xbofs + 1);
> +
> +	/*
> +	 * If this is an empty frame, we can bypass a lot.
> +	 */
> +	if (skb->len == 0) {
> +		if (omap_ir->newspeed) {
> +			omap_ir->newspeed = 0;
> +			omap_irda_set_speed(dev, speed);
> +		}
> +		dev_kfree_skb(skb);
> +		return 0;
> +	}
> +
> +	netif_stop_queue(dev);
> +
> +	/* Copy skb data to DMA buffer */
> +	memcpy(omap_ir->tx_buf_dma_virt, skb->data, skb->len);
> +
> +	/* Copy skb data to DMA buffer */
> +	omap_ir->stats.tx_bytes += skb->len;
> +
> +	/* Set frame length */
> +	uart_reg_out(UART3_TXFLL, (skb->len & 0xff));
> +	uart_reg_out(UART3_TXFLH, (skb->len >> 8));
> +
> +	if (mtt > 1000)
> +		mdelay(mtt / 1000);
> +	else
> +		udelay(mtt);
> +
> +	/* Start TX DMA transfer */
> +	omap_start_tx_dma(omap_ir, skb->len);
> +
> +	/* We can free skb now because it's already in DMA buffer */
> +	dev_kfree_skb(skb);
> +
> +	dev->trans_start = jiffies;
> +
> +	return 0;
> +}
> +
> +static int
> +omap_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
> +{
> +	struct if_irda_req *rq = (struct if_irda_req *)ifreq;
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +	int ret = -EOPNOTSUPP;
> +
> +
> +	switch (cmd) {
> +	case SIOCSBANDWIDTH:
> +		if (capable(CAP_NET_ADMIN)) {
> +			/*
> +			 * We are unable to set the speed if the
> +			 * device is not running.
> +			 */
> +			if (omap_ir->open)
> +				ret = omap_irda_set_speed(dev,
> +						rq->ifr_baudrate);
> +			else {
> +				printk(KERN_ERR "omap_ir: SIOCSBANDWIDTH:"
> +						" !netif_running\n");
> +				ret = 0;
> +			}
> +		}
> +		break;
> +
> +	case SIOCSMEDIABUSY:
> +		ret = -EPERM;
> +		if (capable(CAP_NET_ADMIN)) {
> +			irda_device_set_media_busy(dev, TRUE);
> +			ret = 0;
> +		}
> +		break;
> +
> +	case SIOCGRECEIVING:
> +		rq->ifr_receiving = 0;
> +		break;
> +
> +	default:
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static struct net_device_stats *omap_irda_stats(struct net_device *dev)
> +{
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +	return &omap_ir->stats;
> +}
> +
> +static int omap_irda_start(struct net_device *dev)
> +{
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +	int err;
> +
> +	omap_ir->speed = 9600;
> +
> +	err = request_irq(dev->irq, omap_irda_irq, 0, dev->name, dev);
> +	if (err)
> +		goto err_irq;
> +
> +	/*
> +	 * The interrupt must remain disabled for now.
> +	 */
> +	disable_irq(dev->irq);
> +
> +	/*  Request DMA channels for IrDA hardware */
> +	if (omap_request_dma(omap_ir->pdata->rx_channel, "IrDA Rx DMA",
> +			(void *)omap_irda_rx_dma_callback,
> +			dev, &(omap_ir->rx_dma_channel))) {
> +		printk(KERN_ERR "Failed to request IrDA Rx DMA\n");
> +		goto err_irq;
> +	}
> +
> +	if (omap_request_dma(omap_ir->pdata->tx_channel, "IrDA Tx DMA",
> +			(void *)omap_irda_tx_dma_callback,
> +			dev, &(omap_ir->tx_dma_channel))) {
> +		printk(KERN_ERR "Failed to request IrDA Tx DMA\n");
> +		goto err_irq;
> +	}
> +
> +	/* Allocate TX and RX buffers for DMA channels */
> +	omap_ir->rx_buf_dma_virt =
> +		dma_alloc_coherent(NULL, IRDA_SKB_MAX_MTU,
> +				&(omap_ir->rx_buf_dma_phys),
> +				GFP_KERNEL);
> +
> +	if (!omap_ir->rx_buf_dma_virt) {
> +		printk(KERN_ERR "Unable to allocate memory for rx_buf_dma\n");
> +		goto err_irq;
> +	}
> +
> +	omap_ir->tx_buf_dma_virt =
> +		dma_alloc_coherent(NULL, IRDA_SIR_MAX_FRAME,
> +				&(omap_ir->tx_buf_dma_phys),
> +				GFP_KERNEL);
> +
> +	if (!omap_ir->tx_buf_dma_virt) {
> +		printk(KERN_ERR "Unable to allocate memory for tx_buf_dma\n");
> +		goto err_mem1;
> +	}
> +
> +	/*
> +	 * Setup the serial port for the specified config.
> +	 */
> +	if (omap_ir->pdata->select_irda)
> +		omap_ir->pdata->select_irda(omap_ir->dev, IR_SEL);
> +
> +	err = omap_irda_startup(dev);
> +
> +	if (err)
> +		goto err_startup;
> +
> +	omap_irda_set_speed(dev, omap_ir->speed = 9600);
> +
> +	/*
> +	 * Open a new IrLAP layer instance.
> +	 */
> +	omap_ir->irlap = irlap_open(dev, &omap_ir->qos, "omap_sir");
> +
> +	err = -ENOMEM;
> +	if (!omap_ir->irlap)
> +		goto err_irlap;
> +
> +	/* Now enable the interrupt and start the queue */
> +	omap_ir->open = 1;
> +
> +	/* Start RX DMA */
> +	omap_irda_start_rx_dma(omap_ir);
> +
> +	enable_irq(dev->irq);
> +	netif_start_queue(dev);
> +
> +	return 0;
> +
> +err_irlap:
> +	omap_ir->open = 0;
> +	omap_irda_shutdown(omap_ir);
> +err_startup:
> +	dma_free_coherent(NULL, IRDA_SIR_MAX_FRAME,
> +			omap_ir->tx_buf_dma_virt, omap_ir->tx_buf_dma_phys);
> +err_mem1:
> +	dma_free_coherent(NULL, IRDA_SKB_MAX_MTU,
> +			omap_ir->rx_buf_dma_virt, omap_ir->rx_buf_dma_phys);
> +err_irq:
> +	free_irq(dev->irq, dev);
> +	return err;
> +}
> +
> +static int omap_irda_stop(struct net_device *dev)
> +{
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +
> +	disable_irq(dev->irq);
> +
> +	netif_stop_queue(dev);
> +
> +	omap_free_dma(omap_ir->rx_dma_channel);
> +	omap_free_dma(omap_ir->tx_dma_channel);
> +
> +	if (omap_ir->rx_buf_dma_virt)
> +		dma_free_coherent(NULL, IRDA_SKB_MAX_MTU,
> +				omap_ir->rx_buf_dma_virt,
> +				omap_ir->rx_buf_dma_phys);
> +	if (omap_ir->tx_buf_dma_virt)
> +		dma_free_coherent(NULL, IRDA_SIR_MAX_FRAME,
> +				omap_ir->tx_buf_dma_virt,
> +				omap_ir->tx_buf_dma_phys);
> +
> +	omap_irda_shutdown(omap_ir);
> +
> +	/* Stop IrLAP */
> +	if (omap_ir->irlap) {
> +		irlap_close(omap_ir->irlap);
> +		omap_ir->irlap = NULL;
> +	}
> +
> +	omap_ir->open = 0;
> +
> +	/*
> +	 * Free resources
> +	 */
> +	free_irq(dev->irq, dev);
> +
> +	return 0;
> +}
> +
> +static int omap_irda_set_speed(struct net_device *dev, int speed)
> +{
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +	int divisor;
> +	unsigned long flags;
> +
> +	/* Set IrDA speed */
> +	if (speed <= 115200) {
> +
> +		local_irq_save(flags);
> +
> +		/* SIR mode */
> +		if (omap_ir->pdata->transceiver_mode)
> +			omap_ir->pdata->transceiver_mode(omap_ir->dev,
> +							IR_SIRMODE);
> +
> +		/* Set SIR mode */
> +		uart_reg_out(UART3_MDR1, 1);
> +		uart_reg_out(UART3_EBLR, 1);
> +
> +		divisor = 48000000 / (16 * speed);	/* Base clock 48 MHz */
> +
> +		uart_reg_out(UART3_LCR, UART3_LCR_DIVEN);
> +		uart_reg_out(UART3_DLL, (divisor & 0xff));
> +		uart_reg_out(UART3_DLH, (divisor >> 8));
> +		uart_reg_out(UART3_LCR, 0x03);
> +
> +		uart_reg_out(UART3_MCR, 0);
> +
> +		local_irq_restore(flags);
> +	} else if (speed <= 1152000) {
> +
> +		local_irq_save(flags);
> +
> +		/* Set MIR mode, auto SIP */
> +		uart_reg_out(UART3_MDR1, UART3_MDR1_MIR |
> +				UART3_MDR1_SIP_AUTO);
> +
> +		uart_reg_out(UART3_EBLR, 2);
> +
> +		divisor = 48000000 / (41 * speed);	/* Base clock 48 MHz */
> +
> +		uart_reg_out(UART3_LCR, UART3_LCR_DIVEN);
> +		uart_reg_out(UART3_DLL, (divisor & 0xff));
> +		uart_reg_out(UART3_DLH, (divisor >> 8));
> +		uart_reg_out(UART3_LCR, 0x03);
> +
> +		if (omap_ir->pdata->transceiver_mode)
> +			omap_ir->pdata->transceiver_mode(omap_ir->dev,
> +							IR_MIRMODE);
> +
> +		local_irq_restore(flags);
> +	} else {
> +		local_irq_save(flags);
> +
> +		/* FIR mode */
> +		uart_reg_out(UART3_MDR1, UART3_MDR1_FIR |
> +				UART3_MDR1_SIP_AUTO);
> +
> +		if (omap_ir->pdata->transceiver_mode)
> +			omap_ir->pdata->transceiver_mode(omap_ir->dev,
> +							IR_FIRMODE);
> +
> +		local_irq_restore(flags);
> +	}
> +
> +	omap_ir->speed = speed;
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +/*
> + * Suspend the IrDA interface.
> + */
> +static int omap_irda_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> +	struct net_device *dev = platform_get_drvdata(pdev);
> +	struct omap_irda *omap_ir = netdev_priv(dev);
> +
> +	if (!dev)
> +		return 0;
> +
> +	if (omap_ir->open) {
> +		/*
> +		 * Stop the transmit queue
> +		 */
> +		netif_device_detach(dev);
> +		disable_irq(dev->irq);
> +		omap_irda_shutdown(omap_ir);
> +	}
> +	return 0;
> +}
> +
> +/*
> + * Resume the IrDA interface.
> + */
> +static int omap_irda_resume(struct platform_device *pdev)
> +{
> +	struct net_device *dev = platform_get_drvdata(pdev);
> +	struct omap_irda *omap_ir= netdev_priv(dev);
> +
> +	if (!dev)
> +		return 0;
> +
> +	if (omap_ir->open) {
> +		/*
> +		 * If we missed a speed change, initialise at the new speed
> +		 * directly.  It is debatable whether this is actually
> +		 * required, but in the interests of continuing from where
> +		 * we left off it is desireable.  The converse argument is
> +		 * that we should re-negotiate at 9600 baud again.
> +		 */
> +		if (omap_ir->newspeed) {
> +			omap_ir->speed = omap_ir->newspeed;
> +			omap_ir->newspeed = 0;
> +		}
> +
> +		omap_irda_startup(dev);
> +		omap_irda_set_speed(dev, omap_ir->speed);
> +		enable_irq(dev->irq);
> +
> +		/*
> +		 * This automatically wakes up the queue
> +		 */
> +		netif_device_attach(dev);
> +	}
> +
> +	return 0;
> +}
> +#else
> +#define omap_irda_suspend	NULL
> +#define omap_irda_resume	NULL
> +#endif
> +
> +static int omap_irda_probe(struct platform_device *pdev)
> +{
> +	struct net_device *dev;
> +	struct omap_irda *omap_ir;
> +	struct omap_irda_config *pdata = pdev->dev.platform_data;
> +	unsigned int baudrate_mask;
> +	int err = 0;
> +	int irq = NO_IRQ;
> +
> +	if (!pdata) {
> +		printk(KERN_ERR "IrDA Platform data not supplied\n");
> +		return -ENOENT;
> +	}
> +
> +	if (!pdata->rx_channel || !pdata->tx_channel) {
> +		printk(KERN_ERR "IrDA invalid rx/tx channel value\n");
> +		return -ENOENT;
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq <= 0) {
> +		printk(KERN_WARNING "no irq for IrDA\n");
> +		return -ENOENT;
> +	}
> +
> +	dev = alloc_irdadev(sizeof(struct omap_irda));
> +	if (!dev)
> +		goto err_mem_1;
> +
> +
> +	omap_ir = netdev_priv(dev);
> +	omap_ir->dev = &pdev->dev;
> +	omap_ir->pdata = pdata;
> +
> +	dev->hard_start_xmit	= omap_irda_hard_xmit;
> +	dev->open		= omap_irda_start;
> +	dev->stop		= omap_irda_stop;
> +	dev->do_ioctl		= omap_irda_ioctl;
> +	dev->get_stats		= omap_irda_stats;
> +	dev->irq		= irq;
> +
> +	irda_init_max_qos_capabilies(&omap_ir->qos);
> +
> +	baudrate_mask = 0;
> +	if (omap_ir->pdata->transceiver_cap & IR_SIRMODE)
> +		baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
> +	if (omap_ir->pdata->transceiver_cap & IR_MIRMODE)
> +		baudrate_mask |= IR_57600 | IR_1152000;
> +	if (omap_ir->pdata->transceiver_cap & IR_FIRMODE)
> +		baudrate_mask |= IR_4000000 << 8;
> +
> +	omap_ir->qos.baud_rate.bits &= baudrate_mask;
> +	omap_ir->qos.min_turn_time.bits = 7;
> +
> +	irda_qos_bits_to_value(&omap_ir->qos);
> +
> +	/* Any better way to avoid this? No. */
> +	if (machine_is_omap_h3() || machine_is_omap_h4())
> +		INIT_WORK(&omap_ir->pdata->gpio_expa, NULL, NULL);
> +
> +	err = register_netdev(dev);
> +	if (!err)
> +		platform_set_drvdata(pdev, dev);
> +	else
> +		free_netdev(dev);
> +
> +err_mem_1:
> +	return err;
> +}
> +
> +static int omap_irda_remove(struct platform_device *pdev)
> +{
> +	struct net_device *dev = platform_get_drvdata(pdev);
> +
> +	if (pdev) {
> +		unregister_netdev(dev);
> +		free_netdev(dev);
> +	}
> +	return 0;
> +}
> +
> +static struct platform_driver omapir_driver = {
> +	.probe		= omap_irda_probe,
> +	.remove		= omap_irda_remove,
> +	.suspend	= omap_irda_suspend,
> +	.resume		= omap_irda_resume,
> +	.driver		= {
> +		.name	= "omapirda",
> +	},
> +};
> +
> +static char __initdata banner[] = KERN_INFO "OMAP IrDA driver initializing\n";
> +
> +static int __init omap_irda_init(void)
> +{
> +	printk(banner);
> +	return platform_driver_register(&omapir_driver);
> +}
> +
> +static void __exit omap_irda_exit(void)
> +{
> +	platform_driver_unregister(&omapir_driver);
> +}
> +
> +module_init(omap_irda_init);
> +module_exit(omap_irda_exit);
> +
> +MODULE_AUTHOR("MontaVista");
> +MODULE_DESCRIPTION("OMAP IrDA Driver");
> +MODULE_LICENSE("GPL");
> +
> -- 
> 1.3.3
> 

> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> irda-users mailing list
> irda-users@...ts.sourceforge.net
> http://lists.sourceforge.net/lists/listinfo/irda-users

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists