Bootdata ok (command line is ro root=LABEL=/) Linux version 2.6.9-34.ELsmp (buildcentos@nasha.karan.org) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Thu Mar 9 06:23:23 GMT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fffe000 (ACPI data) BIOS-e820: 000000001fffe000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f7140 ACPI: RSDT (v001 A M I OEMRSDT 0x11000517 MSFT 0x00000097) @ 0x000000001fff0000 ACPI: FADT (v002 A M I OEMFACP 0x11000517 MSFT 0x00000097) @ 0x000000001fff0200 ACPI: MADT (v001 A M I OEMAPIC 0x11000517 MSFT 0x00000097) @ 0x000000001fff0390 ACPI: OEMB (v001 A M I AMI_OEM 0x11000517 MSFT 0x00000097) @ 0x000000001fffe040 ACPI: DSDT (v001 0ABSW 0ABSW005 0x00000005 INTL 0x02002026) @ 0x0000000000000000 Enabling SRAT NUMA discovery Warning: acpi_table_parse(ACPI_SRAT) returned 0! Warning: acpi_table_parse(ACPI_SLIT) returned 0! acpi_numa_init() failed, disabling ACPI NUMA config Scanning NUMA topology in Northbridge 24 Number of nodes 1 (10000) Node 0 MemBase 0000000000000000 Limit 000000001fff0000 Using 22 for the hash shift. Max addr is 1fff0000 Using node hash shift of 22 Bootmem setup node 0 0000000000000000-000000001fff0000 No mptable found. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: PM-Timer IO Port: 0x508 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Setting APIC routing to flat ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Checking aperture... CPU 0: aperture @ 8c02000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: ro root=LABEL=/ console=tty0 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2394.124 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 509240k/524224k available (2084k kernel code, 0k reserved, 1280k data, 192k init) Calibrating delay using timer specific routine.. 4793.01 BogoMIPS (lpj=2396507) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) AMD CPU0: Physical Processor ID: 0 AMD CPU0: Processor Core ID: 0 AMD CPU0: Initial APIC ID: 0 CPU 0(2) -> Node 0 Using local APIC NMI watchdog using perfctr0 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) AMD CPU0: Physical Processor ID: 0 AMD CPU0: Processor Core ID: 0 AMD CPU0: Initial APIC ID: 0 CPU 0(2) -> Node 0 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 per-CPU timeslice cutoff: 512.02 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/1 rip 6000 rsp 1001fe25f58 Initializing CPU#1 Calibrating delay using timer specific routine.. 4787.35 BogoMIPS (lpj=2393678) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) AMD CPU1: Physical Processor ID: 0 AMD CPU1: Processor Core ID: 1 AMD CPU1: Initial APIC ID: 1 CPU 1(2) -> Node 0 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 Total of 2 processors activated (9580.37 BogoMIPS). Using local APIC timer interrupts. Detected 12.469 MHz APIC timer. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNUS] (IRQs *10) ACPI: PCI Interrupt Link [LNSA] (IRQs *11) usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:03.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:03.2[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 19 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:01:0e.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 24 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:02:03.1[B] -> GSI 25 (level, low) -> IRQ 185 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1156856734.307:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 7BBEE86DB23DA574 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1 SvrWks HT1000: chipset revision 0 SvrWks HT1000: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 16384) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.04-rh) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: init not cpu 0 ACPI: (supports S0 S1 S5) ACPI wakeup devices: P1P2 USB0 USB1 USB2 PS2K PS2M SLPB Freeing unused kernel memory: 192k freed SCSI subsystem initialized libata version 1.20 loaded. sata_svw 0000:01:0e.0: version 1.07 ACPI: PCI interrupt 0000:01:0e.0[A] -> GSI 11 (level, low) -> IRQ 11 ata1: SATA max UDMA/133 cmd 0xFFFFFF0000004000 ctl 0xFFFFFF0000004020 bmdma 0xFFFFFF0000004030 irq 11 ata2: SATA max UDMA/133 cmd 0xFFFFFF0000004100 ctl 0xFFFFFF0000004120 bmdma 0xFFFFFF0000004130 irq 11 ata3: SATA max UDMA/133 cmd 0xFFFFFF0000004200 ctl 0xFFFFFF0000004220 bmdma 0xFFFFFF0000004230 irq 11 ata4: SATA max UDMA/133 cmd 0xFFFFFF0000004300 ctl 0xFFFFFF0000004320 bmdma 0xFFFFFF0000004330 irq 11 ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3468 86:3c01 87:4763 88:207f ata1: dev 0 ATA-7, max UDMA/133, 160836480 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_svw ata2: no device found (phy stat 00000004) scsi1 : sata_svw ata3: no device found (phy stat 00000004) scsi2 : sata_svw ata4: no device found (phy stat 00000004) scsi3 : sata_svw Using cfq io scheduler Vendor: ATA Model: HDS728080PLA380 Rev: PF2O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) SCSI device sda: drive cache: write back SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 5980215 EXT3-fs: sda1: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-34.ELsmp floppy0: no floppy controllers found tg3.c:v3.43-rh (Oct 24, 2005) ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 24 (level, low) -> IRQ 177 divert: allocating divert_blk for eth0 eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:30:48:56:64:32 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[769f4000] ACPI: PCI interrupt 0000:02:03.1[B] -> GSI 25 (level, low) -> IRQ 185 divert: allocating divert_blk for eth1 eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:30:48:56:64:33 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist ACPI: PCI interrupt 0000:00:03.2[A] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: irq 10, pci mem ffffff000001a000 ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: irq 10, pci mem ffffff000001c000 ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:03.1[A] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: irq 10, pci mem ffffff000001e000 ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] EXT3 FS on sda1, internal journal device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com Adding 2409708k swap on /dev/sda2. Priority:-1 extents:1 Linux Kernel Card Services options: [pci] [cardbus] [pm] ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. lp: driver loaded but no devices found NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff803fc400(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present ip_tables: (C) 2000-2002 Netfilter core team tg3: eth1: Link is up at 1000 Mbps, full duplex. tg3: eth1: Flow control is on for TX and on for RX. eth1: no IPv6 routers present unloading Kernel Card Services ohci_hcd 0000:00:03.0: remove, state 1 usb usb2: USB disconnect, address 1 ohci_hcd 0000:00:03.0: USB bus 2 deregistered ohci_hcd 0000:00:03.1: remove, state 1 usb usb3: USB disconnect, address 1 ohci_hcd 0000:00:03.1: USB bus 3 deregistered ehci_hcd 0000:00:03.2: remove, state 1 usb usb1: USB disconnect, address 1 ehci_hcd 0000:00:03.2: USB bus 1 deregistered device-mapper: cleaned up