Message-ID: <20060829073339.GA4181@aehallh.com>
Date:	Tue, 29 Aug 2006 03:33:39 -0400
From:	"Zephaniah E. Hull" <warp@...allh.com>
To:	linux-input@...ey.karlin.mff.cuni.cz, linux-kernel@...r.kernel.org,
	Marcelo Tosatti <mtosatti@...hat.com>
Subject: [RPC] OLPC tablet input driver.

The OLPC will ship with a somewhat unique input device made by ALPS,
connected via PS/2 and speaking a protocol only loosely based on that
spoken by other ALPS devices.

This is required by the noticeable different between this device and
others made by alps, specificly that it is very wide, with the center
1/3rd usable with the GS sensor, and the entire area usable with the PT
sensor, with support for using both at once.

The protocol differs enough that I split the driver for this off from
the ALPS driver.

The patch is below, but there are a few things of note.

1: Cosmetic: Some line lengths, and outputs with debugging enabled, are
over 80 columns wide.  Will be fixed in the next version of this patch.

2: Cosmetic: Input device IDs need to be decided on, some feedback on
the best values to use here would be appreciated.

3: Patch stuff: Because the protocol uses 9 byte packets I had to
increase the size of the buffer in struct psmouse.  Should this be split
off into a separate patch?

4: Technical/policy: Buttons are currently sent to both of the input
devices we generate, I don't see any way to avoid this that is not a
policy decision on which buttons belong to which device, but I'm open to
suggestions.

5: Technical: Min/max on absolute values are currently reported as the
protocol limits (10 bits on GS X, GS Y, and PT Y.  11 bits on PT X.  7
bits on GS pressure).  Until we get samples based on the newer design
and do some testing to see how big the variations are, we just don't
have any numbers to put here.

6: Technical, maybe: The early samples I have that speak this protocol
are doing some odd things with this driver.  Mostly in the realm of
sample rate and pressure reporting.  I'm fairly sure that this is
hardware related, but it's worth mentioning.


That said, here the patch is for comments.
(And possibly for the OLPC kernel tree for others with samples to play
with.)


Signed-off-by: Zephaniah E. Hull <warp@...allh.com>

diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 21a1de6..6218e5a 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -14,4 +14,4 @@ obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
 obj-$(CONFIG_MOUSE_HIL)		+= hil_ptr.o
 obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
 
-psmouse-objs  := psmouse-base.o alps.o logips2pp.o synaptics.o lifebook.o trackpoint.o
+psmouse-objs  := psmouse-base.o alps.o logips2pp.o synaptics.o lifebook.o trackpoint.o olpc.o
diff --git a/drivers/input/mouse/olpc.c b/drivers/input/mouse/olpc.c
new file mode 100644
index 0000000..245f29e
--- /dev/null
+++ b/drivers/input/mouse/olpc.c
@@ -0,0 +1,327 @@
+/*
+ * OLPC touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2006 One Laptop Per Child, inc.
+ * Author Zephaniah E. Hull.
+ *
+ * This driver is partly based on the ALPS driver, which is:
+ *
+ * Copyright (c) 2003 Neil Brown <neilb@....unsw.edu.au>
+ * Copyright (c) 2003-2005 Peter Osterlund <petero2@...ia.com>
+ * Copyright (c) 2004 Dmitry Torokhov <dtor@...l.ru>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@...e.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The touchpad on the OLPC is fairly wide, with the entire area usable
+ * as a tablet, and the center 1/3rd also usable as a touchpad.
+ *
+ * The device has simultanious reporting, so that both can be used at once.
+ *
+ * The PT+GS protocol is similar to the base ALPS protocol, in that the
+ * GS data is where the ALPS parser would expect to find it, however
+ * there are several additional bytes, the button bits are in a
+ * different byte, and the bits used for finger and gesture indication
+ * are replaced by two bits which indicate if it is reporting PT or GS
+ * coordinate data in that packet.
+ */
+
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/libps2.h>
+
+#include "psmouse.h"
+#include "olpc.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define dbg(format, arg...) printk(KERN_INFO "olpc.c(%d): " format "\n", __LINE__, ## arg)
+#else
+#define dbg(format, arg...) do {} while (0)
+#endif
+
+#define OLPC_PT		0x01
+#define OLPC_GS		0x02
+#define OLPC_PTGS	0x04
+
+static struct olpc_model_info olpc_model_data[] = {
+	{ { 0x67, 0x00, 0x0a }, 0xeb, 0xff, OLPC_PTGS },	/* OLPC in PT+GS mode. */
+};
+
+/*
+ * OLPC absolute Mode - new format
+ *
+ * byte 0:  1    ?    ?    ?    1    ?    ?    ?
+ * byte 1:  0   x6   x5   x4   x3   x2   x1   x0
+ * byte 2:  0   x10  x9   x8   x7    ?  fin  ges
+ * byte 3:  0   y9   y8   y7    1    0    R    L
+ * byte 4:  0   y6   y5   y4   y3   y2   y1   y0
+ * byte 5:  0   z6   z5   z4   z3   z2   z1   z0
+ *
+ * ?'s can have different meanings on different models,
+ * such as wheel rotation, extra buttons, stick buttons
+ * on a dualpoint, etc.
+ */
+
+static void olpc_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
+{
+	struct olpc_data *priv = psmouse->private;
+	unsigned char *packet = psmouse->packet;
+	struct input_dev *dev = psmouse->dev;
+	struct input_dev *dev2 = priv->dev2;
+	int px, py, gx, gy, gz, gs_down, pt_down, left, right;
+
+	input_regs(dev, regs);
+
+	left = packet[6] & 1;
+	right = packet[6] & 2;
+	gx = packet[1] | ((packet[2] & 0x78) << (7 - 3));
+	gy = packet[4] | ((packet[3] & 0x70) << (7 - 4));
+	gz = packet[5];
+	px = packet[8] | ((packet[2] & 0x7) << 7);
+	py = packet[7] | ((packet[6] & 0x70) << (7 - 4));
+
+	pt_down = packet[3] & 1;
+	gs_down = packet[3] & 2;
+
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev2, BTN_LEFT, left);
+	input_report_key(dev, BTN_RIGHT, right);
+	input_report_key(dev2, BTN_RIGHT, right);
+
+	input_report_key(dev, BTN_TOUCH, pt_down);
+	input_report_key(dev, BTN_TOOL_PEN, pt_down);
+	input_report_key(dev2, BTN_TOUCH, gs_down);
+	input_report_key(dev2, BTN_TOOL_FINGER, gs_down);
+
+	if (gs_down) {
+		input_report_abs(dev2, ABS_X, gx);
+		input_report_abs(dev2, ABS_Y, gy);
+	}
+	input_report_abs(dev2, ABS_PRESSURE, gz);
+
+	if (pt_down) {
+		input_report_abs(dev, ABS_X, px);
+		input_report_abs(dev, ABS_Y, py);
+	}
+
+	input_sync(dev);
+}
+
+static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
+{
+	struct olpc_data *priv = psmouse->private;
+	psmouse_ret_t ret = PSMOUSE_BAD_DATA;
+
+	if ((psmouse->packet[0] & priv->i->mask0) != priv->i->byte0) {
+		ret = PSMOUSE_BAD_DATA;
+		goto out;
+	}
+
+	/* Bytes 2 - 6 should have 0 in the highest bit */
+	if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 9 &&
+		(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
+	    ret = PSMOUSE_BAD_DATA;
+	    goto out;
+	}
+
+	if ((psmouse->pktcnt == 4 || psmouse->pktcnt == 7) &&
+		((psmouse->packet[psmouse->pktcnt - 1] & 0x88) != 8)) {
+	    ret = PSMOUSE_BAD_DATA;
+	    goto out;
+	}
+
+	if (psmouse->pktcnt == 9) {
+	    olpc_process_packet(psmouse, regs);
+
+	    ret = PSMOUSE_FULL_PACKET;
+	    goto out;
+	}
+
+	ret = PSMOUSE_GOOD_DATA;
+out:
+	if (ret != PSMOUSE_GOOD_DATA)
+		dbg("ret: %d, len: %u, data: %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x", ret, psmouse->pktcnt,
+			psmouse->packet[0], psmouse->packet[1], psmouse->packet[2],
+			psmouse->packet[3], psmouse->packet[4], psmouse->packet[5],
+			psmouse->packet[6], psmouse->packet[7], psmouse->packet[8]);
+	return ret;
+}
+
+static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[4];
+	int i;
+
+	/*
+	 * Now try "E7 report". Allowed responses are in
+	 * olpc_model_data[].signature
+	 */
+	if (ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
+	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21))
+		return NULL;
+
+	param[0] = param[1] = param[2] = 0xff;
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+		return NULL;
+
+	dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
+
+	for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++)
+		if (!memcmp(param, olpc_model_data[i].signature, sizeof(olpc_model_data[i].signature)))
+			return olpc_model_data + i;
+
+	return NULL;
+}
+
+static int olpc_absolute_mode(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param;
+
+	/* Switch to 'Advanced mode.', four disables in a row. */
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
+		return -1;
+
+	/*
+	 * Switch to simultanious mode, F2 (GETID) three times with no
+	 * arguments or reply, followed by SETRES with an argument of 2.
+	 */
+	ps2_command(ps2dev, NULL, 0xF2);
+	ps2_command(ps2dev, NULL, 0xF2);
+	ps2_command(ps2dev, NULL, 0xF2);
+	param = 0x02;
+	ps2_command(ps2dev, &param, PSMOUSE_CMD_SETRES);
+
+	return 0;
+}
+
+/*
+ * olpc_poll() - poll the touchpad for current motion packet.
+ * Used in resync.
+ */
+static int olpc_poll(struct psmouse *psmouse)
+{
+	/*
+	 * FIXME: We can't poll, find a way to make resync work better.
+	 */ 
+	return 0;
+}
+
+static int olpc_reconnect(struct psmouse *psmouse)
+{
+	struct olpc_data *priv = psmouse->private;
+
+	psmouse_reset(psmouse);
+
+	if (!(priv->i = olpc_get_model(psmouse)))
+		return -1;
+
+	if (olpc_absolute_mode(psmouse)) {
+		printk(KERN_ERR "olpc.c: Failed to reenable absolute mode\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void olpc_disconnect(struct psmouse *psmouse)
+{
+	struct olpc_data *priv = psmouse->private;
+
+	psmouse_reset(psmouse);
+	input_unregister_device(priv->dev2);
+	kfree(priv);
+}
+
+int olpc_init(struct psmouse *psmouse)
+{
+	struct olpc_data *priv;
+	struct input_dev *dev = psmouse->dev;
+	struct input_dev *dev2;
+
+	psmouse->private = priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL);
+	dev2 = input_allocate_device();
+	if (!priv || !dev2)
+		goto init_fail;
+
+	priv->dev2 = dev2;
+
+	if (!(priv->i = olpc_get_model(psmouse)))
+		goto init_fail;
+
+	if (olpc_absolute_mode(psmouse)) {
+		printk(KERN_ERR "olpc.c: Failed to enable absolute mode\n");
+		goto init_fail;
+	}
+
+	dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+	dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+	dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN);
+	dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+
+	dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+	input_set_abs_params(dev, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(dev, ABS_Y, 0, 1023, 0, 0);
+
+	snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
+	dev2->phys = priv->phys;
+	dev2->name = "OLPC OLPC GlideSensor";
+	dev2->id.bustype = BUS_I8042;
+	dev2->id.vendor  = 0x0002;
+	dev2->id.product = PSMOUSE_OLPC;
+	dev2->id.version = 0x0000;
+
+	dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+	dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+	input_set_abs_params(dev2, ABS_X, 0, 2047, 0, 0);
+	input_set_abs_params(dev2, ABS_Y, 0, 1023, 0, 0);
+	input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0);
+	dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+	dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
+	dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+
+	input_register_device(priv->dev2);
+
+
+	psmouse->protocol_handler = olpc_process_byte;
+	psmouse->poll = olpc_poll;
+	psmouse->disconnect = olpc_disconnect;
+	psmouse->reconnect = olpc_reconnect;
+	psmouse->pktsize = 9;
+
+	/* We are having trouble resyncing OLPC touchpads so disable it for now */
+	psmouse->resync_time = 0;
+
+	return 0;
+
+init_fail:
+	input_free_device(dev2);
+	kfree(priv);
+	return -1;
+}
+
+int olpc_detect(struct psmouse *psmouse, int set_properties)
+{
+	struct olpc_model_info *model;
+
+	if (!(model = olpc_get_model(psmouse)))
+		return -1;
+
+	if (set_properties) {
+		psmouse->vendor = "OLPC";
+		psmouse->name = "PenTablet";
+		psmouse->model = 0;
+	}
+	return 0;
+}
+
diff --git a/drivers/input/mouse/olpc.h b/drivers/input/mouse/olpc.h
new file mode 100644
index 0000000..49f4e3e
--- /dev/null
+++ b/drivers/input/mouse/olpc.h
@@ -0,0 +1,37 @@
+/*
+ * OLPC touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2006 One Laptop Per Child, inc.
+ *
+ * This driver is partly based on the ALPS driver.
+ * Copyright (c) 2003 Peter Osterlund <petero2@...ia.com>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@...e.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _OLPC_H
+#define _OLPC_H
+
+int olpc_detect(struct psmouse *psmouse, int set_properties);
+int olpc_init(struct psmouse *psmouse);
+
+struct olpc_model_info {
+        unsigned char signature[3];
+        unsigned char byte0, mask0;
+        unsigned char flags;
+};
+
+struct olpc_data {
+	struct input_dev *dev2;		/* Relative device */
+	char name[32];			/* Name */
+	char phys[32];			/* Phys */
+	struct olpc_model_info *i; 	/* Info */
+	int prev_fin_pt;		/* Finger bit from previous packet */
+	int prev_fin_gs;		/* Finger bit from previous packet */
+};
+
+
+#endif
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 8bc9f51..20060b0 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -26,6 +26,7 @@
 #include "synaptics.h"
 #include "logips2pp.h"
 #include "alps.h"
+#include "olpc.h"
 #include "lifebook.h"
 #include "trackpoint.h"
 
@@ -616,6 +617,15 @@ static int psmouse_extensions(struct psm
  */
 			max_proto = PSMOUSE_IMEX;
 		}
+		ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
+		if (olpc_detect(psmouse, set_properties) == 0) {
+			if (!set_properties || olpc_init(psmouse) == 0)
+				return PSMOUSE_OLPC;
+/*
+ * Init failed, try basic relative protocols
+ */
+			max_proto = PSMOUSE_IMEX;
+		}
 	}
 
 	if (max_proto > PSMOUSE_IMEX && genius_detect(psmouse, set_properties) == 0)
@@ -726,6 +736,13 @@ static struct psmouse_protocol psmouse_p
 		.detect		= trackpoint_detect,
 	},
 	{
+		.type		= PSMOUSE_OLPC,
+		.name		= "OLPC",
+		.alias		= "olpc",
+		.maxproto	= 1,
+		.detect		= olpc_detect,
+	},
+	{
 		.type		= PSMOUSE_AUTO,
 		.name		= "auto",
 		.alias		= "any",
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 4d9107f..f3d7199 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -42,7 +42,7 @@ struct psmouse {
 	struct work_struct resync_work;
 	char *vendor;
 	char *name;
-	unsigned char packet[8];
+	unsigned char packet[9];
 	unsigned char badbyte;
 	unsigned char pktcnt;
 	unsigned char pktsize;
@@ -86,6 +86,7 @@ enum psmouse_type {
 	PSMOUSE_ALPS,
 	PSMOUSE_LIFEBOOK,
 	PSMOUSE_TRACKPOINT,
+	PSMOUSE_OLPC,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 
-- 
	  1024D/E65A7801 Zephaniah E. Hull <warp@...allh.com>
	   92ED 94E4 B1E6 3624 226D  5727 4453 008B E65A 7801
	    CCs of replies from mailing lists are requested.

Download attachment "signature.asc" of type "application/pgp-signature" (190 bytes)

Powered by blists - more mailing lists