| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20060904092420.GA9215@skybase>
Date: Mon, 4 Sep 2006 11:24:20 +0200
From: Martin Schwidefsky <schwidefsky@...ibm.com>
To: linux-kernel@...r.kernel.org, heiko.carstens@...ibm.com
Subject: [S390] convert some assembler to C.
From: Heiko Carstens <heiko.carstens@...ibm.com>
[S390] convert some assembler to C.
Convert GET_IPL_DEVICE assembler macro to C function.
Signed-off-by: Heiko Carstens <heiko.carstens@...ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@...ibm.com>
---
arch/s390/kernel/head.S | 59 ---------------------------------------------
arch/s390/kernel/head31.S | 43 ++++++++++++++++++++++----------
arch/s390/kernel/head64.S | 39 +++++++++++++++++++----------
arch/s390/kernel/ipl.c | 4 +--
drivers/s390/cio/cio.c | 38 +++++++++++++++++++++++++++-
include/asm-s390/lowcore.h | 1
include/asm-s390/setup.h | 8 +++---
7 files changed, 99 insertions(+), 93 deletions(-)
diff -urpN linux-2.6/arch/s390/kernel/head31.S linux-2.6-patched/arch/s390/kernel/head31.S
--- linux-2.6/arch/s390/kernel/head31.S 2006-09-04 11:08:46.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head31.S 2006-09-04 11:08:58.000000000 +0200
@@ -37,13 +37,23 @@ startup:basr %r13,0 # get base
startup_continue:
basr %r13,0 # get base
-.LPG1: GET_IPL_DEVICE
- mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0)
+.LPG1: mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0)
lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
+#
+# Setup stack
+#
+ l %r15,.Linittu-.LPG1(%r13)
+ mvc __LC_CURRENT(4),__TI_task(%r15)
+ ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
+ st %r15,__LC_KERNEL_STACK # set end of kernel stack
+ ahi %r15,-96
+ xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
+ l %r14,.Lipl_save_parameters-.LPG1(%r13)
+ basr %r14,%r14
#
# clear bss memory
#
@@ -115,6 +125,10 @@ startup_continue:
b .Lfchunk-.LPG1(%r13)
.align 4
+.Lipl_save_parameters:
+ .long ipl_save_parameters
+.Linittu:
+ .long init_thread_union
.Lpmask:
.byte 0
.align 8
@@ -274,6 +288,20 @@ startup_continue:
.Lbss_end: .long _end
.Lparmaddr: .long PARMAREA
.Lsccbaddr: .long .Lsccb
+
+ .globl ipl_schib
+ipl_schib:
+ .rept 13
+ .long 0
+ .endr
+
+ .globl ipl_flags
+ipl_flags:
+ .long 0
+ .globl ipl_devno
+ipl_devno:
+ .word 0
+
.org 0x12000
.globl s390_readinfo_sccb
s390_readinfo_sccb:
@@ -305,16 +333,6 @@ s390_readinfo_sccb:
.globl _stext
_stext: basr %r13,0 # get base
.LPG3:
-#
-# Setup stack
-#
- l %r15,.Linittu-.LPG3(%r13)
- mvc __LC_CURRENT(4),__TI_task(%r15)
- ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
- st %r15,__LC_KERNEL_STACK # set end of kernel stack
- ahi %r15,-96
- xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
-
# check control registers
stctl %c0,%c15,0(%r15)
oi 2(%r15),0x40 # enable sigp emergency signal
@@ -333,6 +351,5 @@ _stext: basr %r13,0 # get base
#
.align 8
.Ldw: .long 0x000a0000,0x00000000
-.Linittu:.long init_thread_union
.Lstart:.long start_kernel
.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
diff -urpN linux-2.6/arch/s390/kernel/head64.S linux-2.6-patched/arch/s390/kernel/head64.S
--- linux-2.6/arch/s390/kernel/head64.S 2006-09-04 11:08:46.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head64.S 2006-09-04 11:08:58.000000000 +0200
@@ -39,7 +39,6 @@ startup_continue:
basr %r13,0 # get base
.LPG1: sll %r13,1 # remove high order bit
srl %r13,1
- GET_IPL_DEVICE
lhi %r1,1 # mode 1 = esame
mvi __LC_AR_MODE_ID,1 # set esame flag
slr %r0,%r0 # set cpuid to zero
@@ -49,7 +48,18 @@ startup_continue:
lg %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
+#
+# Setup stack
+#
+ larl %r15,init_thread_union
+ lg %r14,__TI_task(%r15) # cache current in lowcore
+ stg %r14,__LC_CURRENT
+ aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
+ stg %r15,__LC_KERNEL_STACK # set end of kernel stack
+ aghi %r15,-160
+ xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
+ brasl %r14,ipl_save_parameters
#
# clear bss memory
#
@@ -269,6 +279,19 @@ startup_continue:
.Lparmaddr:
.quad PARMAREA
+ .globl ipl_schib
+ipl_schib:
+ .rept 13
+ .long 0
+ .endr
+
+ .globl ipl_flags
+ipl_flags:
+ .long 0
+ .globl ipl_devno
+ipl_devno:
+ .word 0
+
.org 0x12000
.globl s390_readinfo_sccb
s390_readinfo_sccb:
@@ -300,24 +323,12 @@ s390_readinfo_sccb:
.globl _stext
_stext: basr %r13,0 # get base
.LPG3:
-#
-# Setup stack
-#
- larl %r15,init_thread_union
- lg %r14,__TI_task(%r15) # cache current in lowcore
- stg %r14,__LC_CURRENT
- aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
- stg %r15,__LC_KERNEL_STACK # set end of kernel stack
- aghi %r15,-160
- xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
-
# check control registers
stctg %c0,%c15,0(%r15)
oi 6(%r15),0x40 # enable sigp emergency signal
oi 4(%r15),0x10 # switch on low address proctection
lctlg %c0,%c15,0(%r15)
-#
lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
brasl %r14,start_kernel # go to C code
#
@@ -325,7 +336,7 @@ _stext: basr %r13,0
#
basr %r13,0
lpswe .Ldw-.(%r13) # load disabled wait psw
-#
+
.align 8
.Ldw: .quad 0x0002000180000000,0x0000000000000000
.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
diff -urpN linux-2.6/arch/s390/kernel/head.S linux-2.6-patched/arch/s390/kernel/head.S
--- linux-2.6/arch/s390/kernel/head.S 2006-09-04 11:08:43.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head.S 2006-09-04 11:08:58.000000000 +0200
@@ -481,65 +481,6 @@ start:
.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
-.macro GET_IPL_DEVICE
-.Lget_ipl_device:
- l %r1,0xb8 # get sid
- sll %r1,15 # test if subchannel is enabled
- srl %r1,31
- ltr %r1,%r1
- bz 2f-.LPG1(%r13) # subchannel disabled
- l %r1,0xb8
- la %r5,.Lipl_schib-.LPG1(%r13)
- stsch 0(%r5) # get schib of subchannel
- bnz 2f-.LPG1(%r13) # schib not available
- tm 5(%r5),0x01 # devno valid?
- bno 2f-.LPG1(%r13)
- la %r6,ipl_parameter_flags-.LPG1(%r13)
- oi 3(%r6),0x01 # set flag
- la %r2,ipl_devno-.LPG1(%r13)
- mvc 0(2,%r2),6(%r5) # store devno
- tm 4(%r5),0x80 # qdio capable device?
- bno 2f-.LPG1(%r13)
- oi 3(%r6),0x02 # set flag
-
- # copy ipl parameters
-
- lhi %r0,4096
- l %r2,20(%r0) # get address of parameter list
- lhi %r3,IPL_PARMBLOCK_ORIGIN
- st %r3,20(%r0)
- lhi %r4,1
- cr %r2,%r3 # start parameters < destination ?
- jl 0f
- lhi %r1,1 # copy direction is upwards
- j 1f
-0: lhi %r1,-1 # copy direction is downwards
- ar %r2,%r0
- ar %r3,%r0
- ar %r2,%r1
- ar %r3,%r1
-1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters
- ar %r3,%r1
- ar %r2,%r1
- sr %r0,%r4
- jne 1b
- b 2f-.LPG1(%r13)
-
- .align 4
-.Lipl_schib:
- .rept 13
- .long 0
- .endr
-
- .globl ipl_parameter_flags
-ipl_parameter_flags:
- .long 0
- .globl ipl_devno
-ipl_devno:
- .word 0
-2:
-.endm
-
#ifdef CONFIG_64BIT
#include "head64.S"
#else
diff -urpN linux-2.6/arch/s390/kernel/ipl.c linux-2.6-patched/arch/s390/kernel/ipl.c
--- linux-2.6/arch/s390/kernel/ipl.c 2006-09-04 11:08:47.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/ipl.c 2006-09-04 11:08:58.000000000 +0200
@@ -189,9 +189,9 @@ static enum ipl_type ipl_get_type(void)
{
struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
- if (!IPL_DEVNO_VALID)
+ if (!(ipl_flags & IPL_DEVNO_VALID))
return IPL_TYPE_UNKNOWN;
- if (!IPL_PARMBLOCK_VALID)
+ if (!(ipl_flags & IPL_PARMBLOCK_VALID))
return IPL_TYPE_CCW;
if (ipl->hdr.version > IPL_MAX_SUPPORTED_VERSION)
return IPL_TYPE_UNKNOWN;
diff -urpN linux-2.6/drivers/s390/cio/cio.c linux-2.6-patched/drivers/s390/cio/cio.c
--- linux-2.6/drivers/s390/cio/cio.c 2006-09-04 11:08:47.000000000 +0200
+++ linux-2.6-patched/drivers/s390/cio/cio.c 2006-09-04 11:08:58.000000000 +0200
@@ -16,11 +16,10 @@
#include <linux/device.h>
#include <linux/kernel_stat.h>
#include <linux/interrupt.h>
-
#include <asm/cio.h>
#include <asm/delay.h>
#include <asm/irq.h>
-
+#include <asm/setup.h>
#include "airq.h"
#include "cio.h"
#include "css.h"
@@ -909,3 +908,38 @@ void reipl_ccw_dev(struct ccw_dev_id *de
cio_reset_channel_paths();
do_reipl_asm(*((__u32*)&schid));
}
+
+extern struct schib ipl_schib;
+
+/*
+ * ipl_save_parameters gets called very early. It is not allowed to access
+ * anything in the bss section at all. The bss section is not cleared yet,
+ * but may contain some ipl parameters written by the firmware.
+ * These parameters (if present) are copied to 0x2000.
+ * To avoid corruption of the ipl parameters, all variables used by this
+ * function must reside on the stack or in the data section.
+ */
+void ipl_save_parameters(void)
+{
+ struct subchannel_id schid;
+ unsigned int *ipl_ptr;
+ void *src, *dst;
+
+ schid = *(struct subchannel_id *)__LC_SUBCHANNEL_ID;
+ if (!schid.one)
+ return;
+ if (stsch(schid, &ipl_schib))
+ return;
+ if (!ipl_schib.pmcw.dnv)
+ return;
+ ipl_devno = ipl_schib.pmcw.dev;
+ ipl_flags |= IPL_DEVNO_VALID;
+ if (!ipl_schib.pmcw.qf)
+ return;
+ ipl_flags |= IPL_PARMBLOCK_VALID;
+ ipl_ptr = (unsigned int *)__LC_IPL_PARMBLOCK_PTR;
+ src = (void *)(unsigned long)*ipl_ptr;
+ dst = (void *)IPL_PARMBLOCK_ORIGIN;
+ memmove(dst, src, PAGE_SIZE);
+ *ipl_ptr = IPL_PARMBLOCK_ORIGIN;
+}
diff -urpN linux-2.6/include/asm-s390/lowcore.h linux-2.6-patched/include/asm-s390/lowcore.h
--- linux-2.6/include/asm-s390/lowcore.h 2006-09-04 11:08:47.000000000 +0200
+++ linux-2.6-patched/include/asm-s390/lowcore.h 2006-09-04 11:08:58.000000000 +0200
@@ -35,6 +35,7 @@
#define __LC_IO_NEW_PSW 0x01f0
#endif /* !__s390x__ */
+#define __LC_IPL_PARMBLOCK_PTR 0x014
#define __LC_EXT_PARAMS 0x080
#define __LC_CPU_ADDRESS 0x084
#define __LC_EXT_INT_CODE 0x086
diff -urpN linux-2.6/include/asm-s390/setup.h linux-2.6-patched/include/asm-s390/setup.h
--- linux-2.6/include/asm-s390/setup.h 2006-09-04 11:08:47.000000000 +0200
+++ linux-2.6-patched/include/asm-s390/setup.h 2006-09-04 11:08:58.000000000 +0200
@@ -125,13 +125,15 @@ struct ipl_parameter_block {
/*
* IPL validity flags and parameters as detected in head.S
*/
-extern u32 ipl_parameter_flags;
+extern u32 ipl_flags;
extern u16 ipl_devno;
void do_reipl(void);
-#define IPL_DEVNO_VALID (ipl_parameter_flags & 1)
-#define IPL_PARMBLOCK_VALID (ipl_parameter_flags & 2)
+enum {
+ IPL_DEVNO_VALID = 1,
+ IPL_PARMBLOCK_VALID = 2,
+};
#define IPL_PARMBLOCK_START ((struct ipl_parameter_block *) \
IPL_PARMBLOCK_ORIGIN)
--
VGER BF report: U 0.5
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists