linux-kernel - Re: [BUG] 2.6.18-rc6: hda is allready "IN USE" when booting / pi futex

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20060913012447.GA29749@core>
Date:	Wed, 13 Sep 2006 03:24:47 +0200
From:	Christian Leber <christian@...er.de>
To:	Ingo Molnar <mingo@...e.hu>
Cc:	linux-kernel@...r.kernel.org, Andrew Morton <akpm@...l.org>
Subject: Re: [BUG] 2.6.18-rc6: hda is allready "IN USE" when booting / pi futex

On Tue, Sep 12, 2006 at 11:55:10PM +0200, Ingo Molnar wrote:

> ok, great. Could you try the patch below ontop of 2.6.18-rc6, does it 
> 'fix' your bootup too?

Yes, it does.

> so i'm afraid you managed to trigger a race in the IDE driver that used 
> to be dormant until now... To debug such races the best method is to 
> create a 'trace' by printk-ing key points of the port/disk detection 
> mechanism. [another option would be to use the latency tracer to do a 
> _really_ finegrained trace of the incident - assuming that the bug does 
> not go away due to tracing overhead.]

I'm looking into it, but i doubt i can find the "race"

The output, when it works it looks like this:

[   11.275757] ICH2M: IDE controller at PCI slot 0000:00:1f.1
[   11.275854] ICH2M: chipset revision 3
[   11.275917] ICH2M: not 100% native mode: will probe irqs later
[   11.275999]     ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
[   11.276170]     ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
[   11.276337] Probing IDE interface ide0...
[    2.804000] Time: acpi_pm clocksource has been installed.
[    3.056000] hda: IC25N020ATMR04-0, ATA DISK drive
[    3.504000] hdb: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive
[    3.560000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.560000] Probing IDE interface ide1...
[    4.136000] hda: max request size: 512KiB
[    4.156000] hda: 39070080 sectors (20003 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
[    4.156000] hda: cache flushes supported
[    4.156000]  hda: hda1 hda2 hda3
[    4.216000] hdb: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
[    4.216000] Uniform CD-ROM driver Revision: 3.20
[    4.816000] usbcore: registered new driver usbfs
[    4.820000] usbcore: registered new driver hub
[    4.820000] USB Universal Host Controller Interface driver v3.0


When it fails the order is different:
(but not allways the same, of course)

hda: IC25N020ATMR04-0, ATA DISK drive              <- the disk is found before the controller?!?
ICH2M: IDE controller at PCI slot 0000:00:1f.1
ICH2M: chipset revision 3
ICH2M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
ide0: I/O resource 0x3F6-0x3F6 not free
hda: ERROR, PORTS ALREADY IN USE
ide0 ad 0x1f0-0x1f7,0x3f6 on irq 14
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
hdb: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive
ide1: I/O resource 0x376-0x376 not free
ide1: ports already in use, skipping probe
register_blkdev: cannot get major 3 for ide0


Christian Leber

-- 
  "Omnis enim res, quae dando non deficit, dum habetur et non datur,
   nondum habetur, quomodo habenda est."       (Aurelius Augustinus)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/