| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1158806382.4171.76.camel@dumbo>
Date: Wed, 20 Sep 2006 19:39:42 -0700
From: Sumant Patro <sumantp@...l.com>
To: James.Bottomley@...elEye.com, linux-scsi@...r.kernel.org
Cc: akpm@...l.org, hch@....de, linux-kernel@...r.kernel.org,
Neela.Kolli@...l.com, Bo.Yang@...l.com
Subject: [Patch 7/7] megaraid_sas: sets ioctl timeout and updates
version,changelog
This patch sets timeout of max 180 seconds for ioctl completion.
It also updates the Changelog and hikes the version to 3.05.
Signed-off-by: Sumant Patro <Sumant.Patro@...l.com>
diff -uprN linux-2.6orig/Documentation/scsi/ChangeLog.megaraid_sas linux-2.6new/Documentation/scsi/ChangeLog.megaraid_sas
--- linux-2.6orig/Documentation/scsi/ChangeLog.megaraid_sas 2006-09-20 11:35:08.000000000 -0700
+++ linux-2.6new/Documentation/scsi/ChangeLog.megaraid_sas 2006-09-20 14:36:36.000000000 -0700
@@ -1,4 +1,46 @@
+1 Release Date : Wed Sep 20 10:06:47 PDT 2006 - Sumant Patro <Sumant.Patro@...l.com>
+2 Current Version : 00.00.03.05
+3 Older Version : 00.00.03.04
+
+i. PCI_DEVICE macro used
+
+ Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines.
+
+ - Henrik Kretzschmar <henne@...htwindheim.de>
+ii. All compiler warnings removed
+iii. megasas_ctrl_info struct reverted to 3.02 release
+iv. Default value of megasas_dbg_lvl set to 0
+v. Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl
+
+1 Release Date : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@...l.com>
+2 Current Version : 00.00.03.04
+3 Older Version : 00.00.03.03
+
+i. Added Reboot notify
+ii. Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same
+ as Max Cmds FW can support
+
+1 Release Date : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@...l.com>
+2 Current Version : 00.00.03.03
+3 Older Version : 00.00.03.02
+
+i. Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead.
+ New varible added to set dbg level.
+ii. Disable interrupt made as fn pointer as they are different for 1068 / 1078
+iii. Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and
+ 3 SGE for 32 bit SGL
+iv. Tasklet added for cmd completion
+v. If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset.
+vi. megasas_ctrl_prop structure updated (based on FW struct)
+vii. Added print : FW now in Ready State during initialization
+
+1 Release Date : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@...l.com>
+2 Current Version : 00.00.03.02
+3 Older Version : 00.00.03.01
+
+i. Added FW tranistion state for Hotplug scenario
+
1 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@...l.com>
2 Current Version : 00.00.03.01
3 Older Version : 00.00.02.04
diff -uprN linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6new/drivers/scsi/megaraid/megaraid_sas.c
--- linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.c 2006-09-20 15:32:51.000000000 -0700
+++ linux-2.6new/drivers/scsi/megaraid/megaraid_sas.c 2006-09-20 15:37:46.000000000 -0700
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.03.01
+ * Version : v00.00.03.05
*
* Authors:
* Sreenivas Bagalkote <Sreenivas.Bagalkote@...l.com>
@@ -349,6 +349,7 @@ megasas_issue_polled(struct megasas_inst
* @cmd: Command to be issued
*
* This function waits on an event for the command to be returned from ISR.
+ * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
* Used to issue ioctl commands.
*/
static int
@@ -359,7 +360,8 @@ megasas_issue_blocked_cmd(struct megasas
instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
- wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA));
+ wait_event_timeout(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA),
+ MEGASAS_INTERNAL_CMD_WAIT_TIME*HZ);
return 0;
}
@@ -371,7 +373,8 @@ megasas_issue_blocked_cmd(struct megasas
*
* MFI firmware can abort previously issued AEN comamnd (automatic event
* notification). The megasas_issue_blocked_abort_cmd() issues such abort
- * cmd and blocks till it is completed.
+ * cmd and waits for return status.
+ * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
*/
static int
megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
@@ -405,7 +408,8 @@ megasas_issue_blocked_abort_cmd(struct m
/*
* Wait for this cmd to complete
*/
- wait_event(instance->abort_cmd_wait_q, (cmd->cmd_status != 0xFF));
+ wait_event_timeout(instance->abort_cmd_wait_q, (cmd->cmd_status != 0xFF),
+ MEGASAS_INTERNAL_CMD_WAIT_TIME*HZ);
megasas_return_cmd(instance, cmd);
return 0;
diff -uprN linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.h linux-2.6new/drivers/scsi/megaraid/megaraid_sas.h
--- linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.h 2006-09-20 11:34:07.000000000 -0700
+++ linux-2.6new/drivers/scsi/megaraid/megaraid_sas.h 2006-09-20 11:35:30.000000000 -0700
@@ -18,9 +18,9 @@
/**
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.03.01"
-#define MEGASAS_RELDATE "May 14, 2006"
-#define MEGASAS_EXT_VERSION "Sun May 14 22:49:52 PDT 2006"
+#define MEGASAS_VERSION "00.00.03.05"
+#define MEGASAS_RELDATE "Sep 20, 2006"
+#define MEGASAS_EXT_VERSION "Wed Sep 20 10:06:47 PDT 2006"
/*
* Device IDs
@@ -547,6 +547,7 @@ struct megasas_ctrl_info {
* every MEGASAS_RESET_NOTICE_INTERVAL seconds
*/
#define MEGASAS_RESET_WAIT_TIME 180
+#define MEGASAS_INTERNAL_CMD_WAIT_TIME 180
#define MEGASAS_RESET_NOTICE_INTERVAL 5
#define MEGASAS_IOCTL_CMD 0
View attachment "ioctl_timeout-p7.patch" of type "text/x-patch" (5170 bytes)
Powered by blists - more mailing lists