[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20060923232150.GK5566@stusta.de>
Date: Sun, 24 Sep 2006 01:21:50 +0200
From: Adrian Bunk <bunk@...sta.de>
To: Willy Tarreau <w@....eu>
Cc: Greg KH <greg@...ah.com>, linux-kernel@...r.kernel.org
Subject: Re: Linux 2.6.16.30-pre1
On Sat, Sep 23, 2006 at 06:56:10AM +0200, Willy Tarreau wrote:
> Hi Greg, Hi Adrian,
>
> On Fri, Sep 22, 2006 at 04:09:28PM -0700, Greg KH wrote:
>
> > If you want to accept new drivers and backports like this, I think you
> > will find it very hard to determine what to say yes or no to in the
> > future. It's the main problem that everyone who has tried to maintain a
> > stable tree has run into, that is why we set up the -stable rules to be
> > what they are for that very reason.
>
> When I started the 2.4-hotfix tree nearly two years ago, I wanted to
> avoid merging drivers changes as much as possible. And particularly,
> I avoided to add support for new hardware. The reason is very simple.
> I want to be able to guarantee that if 2.4.X works, then any 2.4.X.Y
> does too so that they can blindly upgrade.
Bugfixes causing regressions are much more likely than new hardware
support adding regressions.
> And if, for any reason,
> people suspect that 2.4.X.Y might have brought a bug, then reverting
> to 2.4.X.Z(Z<Y) should at most bring back older bugs but not remove
> previous support for any hardware.
Either you want to use the newly supported hardware or you don't want to
use it.
In any case, I don't see your point.
> The problem with new hardware
> support is that it can break sensible setups :
>
> - adding a new network card support will cause existing cards to be
> renumberred (it happened to me on several production systems when
> switching from 2.2 to 2.4)
>
> - adding support for a new IDE controller can cause hda to become
> hdc, or worse, hda to become sda (problems encountered when adding
> libata support)
I don't consider merging any patches that could cause the sda problem.
People not using the onboard IDE controller but a different controller,
but OTOH having the driver for their onboard controller enabled in their
kernel really sounds like a strange case.
> - enabling some devices might lock up memory and/or I/O address ranges
> on a bus leading to other devices not working anymore. I had this
> problem when using dlink 580 quad port nics in some buggy machines
> already equipped with adaptec starfire nics.
>
> - other core devices might cause system instability without the
> admin being aware they're really used (eg: ACPI, ...)
>
> Since hardware diversity is so high that nobody can know everything, I
> think it's better to avoid playing alone with people's hardware, but I
> agree it's sometimes very hard to resist.
>
> Adrian, when you have a doubt whether such a fix should go into next
> release, simply tell people about the problem and ask them to test
> current driver. If nobody encounters the problem, you can safely keep
> the patch in your fridge until someone complains. By that time, the
> risks associated with this patch will be better known.
It's not that I wanted to upgrade ACPI to the latest version.
And my rules are:
- patch must be in Linus' tree
- I'm asking the patch authors and maintainers of the affected subsystem
whether the patch is OK for 2.6.16
> > > "is not really allowed under the current -stable rules" is a bit hard to
> > > answer, but considering that "Missing PCI id update for VIA IDE" was OK
> > > for 2.6.17.12 I'd say it's consistent with what you are doing.
> >
> > That was a bugfix as the driver could not access that device without
> > that fix.
>
> Even this might be dangerous in late -stable releases, unless it was a
> recent regression.
It was a case that never worked before.
> Just my 2 cents,
> Willy
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists