[ 0.000000] Linux version 2.6.18-rc6-local-evms (jmb@atlas) (gcc version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)) #1 PREEMPT Tue Sep 12 14:37:12 BST 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffd3800 (usable) [ 0.000000] BIOS-e820: 000000005ffd3800 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 383MB HIGHMEM available. [ 0.000000] 1152MB LOWMEM available. [ 0.000000] On node 0 totalpages: 393171 [ 0.000000] DMA zone: 4096 pages, LIFO batch:0 [ 0.000000] Normal zone: 290816 pages, LIFO batch:31 [ 0.000000] HighMem zone: 98259 pages, LIFO batch:31 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc9b0 [ 0.000000] ACPI: RSDT (v001 DELL CPi R 0x27d50716 ASL 0x00000061) @ 0x5ffd3fd3 [ 0.000000] ACPI: FADT (v001 DELL CPi R 0x27d50716 ASL 0x00000061) @ 0x5ffd4c00 [ 0.000000] ACPI: MADT (v001 DELL CPi R 0x27d50716 ASL 0x00000047) @ 0x5ffd5400 [ 0.000000] ACPI: MCFG (v016 DELL CPi R 0x27d50716 ASL 0x00000061) @ 0x5ffd53c0 [ 0.000000] ACPI: BOOT (v001 DELL CPi R 0x27d50716 ASL 0x00000061) @ 0x5ffd4fc0 [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x5ffd43e6 [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x5ffd420e [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x5ffd4013 [ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) [ 0.000000] Detected 1596.160 MHz processor. [ 9.718354] Built 1 zonelists. Total pages: 393171 [ 9.718357] Kernel command line: root=/dev/evms/dom0/root ro vga=795 quiet splash [ 9.718600] mapped APIC to ffffd000 (fee00000) [ 9.718603] mapped IOAPIC to ffffc000 (fec00000) [ 9.718606] Enabling fast FPU save and restore... done. [ 9.718609] Enabling unmasked SIMD FPU exception support... done. [ 9.718611] Initializing CPU#0 [ 9.718685] CPU 0 irqstacks, hard=b0437000 soft=b0438000 [ 9.718688] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 9.718796] Console: colour dummy device 80x25 [ 9.719710] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) [ 9.720900] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) [ 9.766785] Memory: 1550892k/1572684k available (2016k kernel code, 20504k reserved, 664k data, 284k init, 393036k highmem) [ 9.766789] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.846583] Calibrating delay using timer specific routine.. 3195.56 BogoMIPS (lpj=6391122) [ 9.846612] Security Framework v1.0.0 initialized [ 9.846632] Mount-cache hash table entries: 512 [ 9.846772] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 9.846784] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 9.846794] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.846797] CPU: L2 cache: 2048K [ 9.846800] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 [ 9.846811] Compat vDSO mapped to ffffe000. [ 9.846823] CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 [ 9.846831] Checking 'hlt' instruction... OK. [ 9.862680] ACPI: Core revision 20060707 [ 9.875565] ENABLING IO-APIC IRQs [ 9.875761] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.022559] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd [ 10.189254] Freeing initrd memory: 3074k freed [ 10.189618] NET: Registered protocol family 16 [ 10.189721] EISA bus registered [ 10.189726] ACPI: bus type pci registered [ 10.189733] PCI: Using MMCONFIG [ 10.190461] Setting up standard PCI resources [ 10.208977] ACPI: Interpreter enabled [ 10.208980] ACPI: Using IOAPIC for interrupt routing [ 10.209595] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.209599] PCI: Probing PCI hardware (bus 00) [ 10.209694] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 10.224850] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 10.224855] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 10.224903] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [ 10.225022] Boot video device is 0000:01:00.0 [ 10.225398] PCI: Transparent bridge - 0000:00:1e.0 [ 10.225457] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses') [ 10.225460] Please report the result to linux-kernel to fix this permanently [ 10.225484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.246321] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 10.246593] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 10.246859] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 10.247124] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) [ 10.247376] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 10.247632] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 10.247891] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 10.248299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 10.249399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 10.249772] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.249785] pnp: PnP ACPI init [ 10.282308] pnp: PnP ACPI: found 11 devices [ 10.282313] PnPBIOS: Disabled by ACPI PNP [ 10.282428] SCSI subsystem initialized [ 10.282483] PCI: Using ACPI for IRQ routing [ 10.282486] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 10.299886] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 10.299890] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved [ 10.299893] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved [ 10.299898] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 10.299902] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 10.299905] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 10.299908] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 10.299911] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 10.299914] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 10.299921] pnp: 00:08: ioport range 0x900-0x90f has been reserved [ 10.299924] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 10.299927] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 10.299930] pnp: 00:08: ioport range 0x930-0x93f has been reserved [ 10.299933] pnp: 00:08: ioport range 0x940-0x97f has been reserved [ 10.300130] PCI: Bridge: 0000:00:01.0 [ 10.300132] IO window: d000-dfff [ 10.300136] MEM window: dfd00000-dfefffff [ 10.300139] PREFETCH window: d0000000-d7ffffff [ 10.300147] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 10.300150] IO window: 00002000-000020ff [ 10.300154] IO window: 00002400-000024ff [ 10.300158] PREFETCH window: 68000000-69ffffff [ 10.300162] MEM window: 6a000000-6bffffff [ 10.300166] PCI: Bridge: 0000:00:1e.0 [ 10.300169] IO window: 2000-2fff [ 10.300174] MEM window: dfc00000-dfcfffff [ 10.300178] PREFETCH window: 68000000-69ffffff [ 10.300192] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 10.300197] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 10.300208] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 10.300222] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 10.300226] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 10.300249] NET: Registered protocol family 2 [ 10.334201] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.334409] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [ 10.335349] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 10.335635] TCP: Hash tables configured (established 262144 bind 65536) [ 10.335639] TCP reno registered [ 10.335835] Simple Boot Flag at 0x79 set to 0x1 [ 10.336535] audit: initializing netlink socket (disabled) [ 10.336548] audit(1159354562.696:1): initialized [ 10.336606] highmem bounce pool size: 64 pages [ 10.336664] VFS: Disk quotas dquot_6.5.1 [ 10.336684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.336732] Initializing Cryptographic API [ 10.336738] io scheduler noop registered [ 10.336743] io scheduler anticipatory registered [ 10.336747] io scheduler deadline registered [ 10.336755] io scheduler cfq registered (default) [ 10.337035] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 7680k, total 32768k [ 10.337039] vesafb: mode is 1280x1024x24, linelength=3840, pages=7 [ 10.337042] vesafb: protected mode interface info at c000:581b [ 10.337045] vesafb: pmi: set display start = b00c5889, set palette = b00c58c3 [ 10.337047] vesafb: pmi: ports = de10 de16 de54 de38 de3c de5c de00 de04 deb0 deb2 deb4 [ 10.337054] vesafb: scrolling: redraw [ 10.337058] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 10.410411] Console: switching to colour frame buffer device 160x64 [ 10.478248] fb0: VESA VGA frame buffer device [ 10.478295] isapnp: Scanning for PnP cards... [ 10.788727] isapnp: No Plug & Play device found [ 10.811282] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 10.812146] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 10.812925] libata version 2.00 loaded. [ 10.812965] ahci 0000:00:1f.2: version 2.0 [ 10.812992] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 10.813009] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 10.813012] ahci: probe of 0000:00:1f.2 failed with error -12 [ 10.813045] ata_piix 0000:00:1f.2: version 2.00 [ 10.813050] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 10.965626] PCI: Enabling device 0000:00:1f.2 (0000 -> 0001) [ 10.965630] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 10.965642] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 10.965687] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 [ 10.965784] scsi0 : ata_piix [ 11.122950] ata1.00: ATA-6, max UDMA/100, 117210240 sectors: LBA48 [ 11.122953] ata1.00: ata1: dev 0 multi count 8 [ 11.122955] ata1.00: applying bridge limits [ 11.124449] ata1.00: configured for UDMA/100 [ 11.124561] Vendor: ATA Model: HTS726060M9AT00 Rev: MH4O [ 11.124573] Type: Direct-Access ANSI SCSI revision: 05 [ 11.124658] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 [ 11.124673] scsi1 : ata_piix [ 11.433721] ata2.00: ATAPI, max UDMA/33 [ 11.589586] ata2.00: configured for UDMA/33 [ 11.590161] Vendor: SONY Model: DVD+-RW DW-D56A Rev: PDS7 [ 11.590172] Type: CD-ROM ANSI SCSI revision: 05 [ 11.590315] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 11.590326] sda: Write Protect is off [ 11.590329] sda: Mode Sense: 00 3a 00 00 [ 11.590343] SCSI device sda: drive cache: write back [ 11.590388] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 11.590397] sda: Write Protect is off [ 11.590399] sda: Mode Sense: 00 3a 00 00 [ 11.590412] SCSI device sda: drive cache: write back [ 11.590414] sda: sda1 sda2 sda3 [ 11.611772] sd 0:0:0:0: Attached scsi disk sda [ 11.615940] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 11.615944] Uniform CD-ROM driver Revision: 3.20 [ 11.616000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 11.616041] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.616069] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 11.616143] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 11.619637] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 11.620085] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.620181] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com [ 11.620920] EISA: Probing bus 0 at eisa.0 [ 11.620928] Cannot allocate resource for EISA slot 1 [ 11.620931] Cannot allocate resource for EISA slot 2 [ 11.620956] EISA: Detected 0 cards. [ 11.620975] Netfilter messages via NETLINK v0.30. [ 11.621060] TCP bic registered [ 11.621063] NET: Registered protocol family 8 [ 11.621065] NET: Registered protocol family 20 [ 11.621078] Using IPI Shortcut mode [ 11.621133] ACPI: (supports S0 S3 S4 S5) [ 11.621184] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 11.621289] RAMDISK: Compressed image found at block 0 [ 11.625053] Time: tsc clocksource has been installed. [ 11.793547] input: AT Translated Set 2 keyboard as /class/input/input0 [ 11.793603] VFS: Mounted root (ext2 filesystem). [ 12.222792] EXT2-fs warning (device dm-17): ext2_fill_super: mounting ext3 filesystem as ext2 [ 12.547829] Freeing unused kernel memory: 284k freed [ 12.980860] NET: Registered protocol family 1 [ 16.006777] mice: PS/2 mouse device common for all mice [ 16.325446] input: PS/2 Mouse as /class/input/input1 [ 16.347729] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 [ 24.445783] ts: Compaq touchscreen protocol output [ 123.304556] kjournald starting. Commit interval 5 seconds [ 123.304867] EXT3 FS on dm-11, internal journal [ 123.304872] EXT3-fs: mounted filesystem with ordered data mode. [ 123.352255] kjournald starting. Commit interval 5 seconds [ 123.352554] EXT3 FS on dm-13, internal journal [ 123.352558] EXT3-fs: mounted filesystem with ordered data mode. [ 123.356218] kjournald starting. Commit interval 5 seconds [ 123.356536] EXT3 FS on dm-21, internal journal [ 123.356540] EXT3-fs: mounted filesystem with ordered data mode. [ 123.360106] kjournald starting. Commit interval 5 seconds [ 123.360375] EXT3 FS on dm-7, internal journal [ 123.360379] EXT3-fs: mounted filesystem with ordered data mode. [ 123.427622] kjournald starting. Commit interval 5 seconds [ 123.427937] EXT3 FS on dm-9, internal journal [ 123.427941] EXT3-fs: mounted filesystem with ordered data mode. [ 123.431290] kjournald starting. Commit interval 5 seconds [ 123.431571] EXT3 FS on dm-29, internal journal [ 123.431575] EXT3-fs: mounted filesystem with ordered data mode. [ 123.470787] Adding 1048564k swap on /dev/evms/dom0/swap/0. Priority:-1 extents:1 across:1048564k [ 124.969075] Linux agpgart interface v0.101 (c) Dave Jones [ 124.975803] agpgart: Detected an Intel 915GM Chipset. [ 125.008495] agpgart: AGP aperture is 256M @ 0x0 [ 125.163238] usbcore: registered new driver usbfs [ 125.165953] usbcore: registered new driver hub [ 125.199831] USB Universal Host Controller Interface driver v3.0 [ 125.202339] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 125.202353] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 125.202357] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 125.214118] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 125.214156] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 [ 125.217880] usb usb1: configuration #1 chosen from 1 choice [ 125.218472] hub 1-0:1.0: USB hub found [ 125.218481] hub 1-0:1.0: 2 ports detected [ 125.320663] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 125.320677] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 125.320681] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 125.339880] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 125.339921] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60 [ 125.343482] usb usb2: configuration #1 chosen from 1 choice [ 125.344179] hub 2-0:1.0: USB hub found [ 125.344189] hub 2-0:1.0: 2 ports detected [ 125.452611] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 125.452626] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 125.452630] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 125.453339] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 125.453374] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40 [ 125.454705] usb usb3: configuration #1 chosen from 1 choice [ 125.455316] hub 3-0:1.0: USB hub found [ 125.455323] hub 3-0:1.0: 2 ports detected [ 125.560600] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 125.560616] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 125.560620] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 125.561327] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 125.561360] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20 [ 125.562689] usb usb4: configuration #1 chosen from 1 choice [ 125.563285] hub 4-0:1.0: USB hub found [ 125.563292] hub 4-0:1.0: 2 ports detected [ 126.057147] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 [ 126.057165] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 126.057170] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 126.063527] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 126.063565] ehci_hcd 0000:00:1d.7: debug port 1 [ 126.063571] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 126.063580] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800 [ 126.067464] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 126.071189] usb usb5: configuration #1 chosen from 1 choice [ 126.071796] hub 5-0:1.0: USB hub found [ 126.071805] hub 5-0:1.0: 8 ports detected [ 126.261866] Intel 82802 RNG detected [ 126.261875] intel_rng: cannot enable RNG, aborting [ 126.261877] intel_rng: RNG registering failed (-5) [ 126.985095] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 126.985124] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 127.801250] intel8x0_measure_ac97_clock: measured 55471 usecs [ 127.801253] intel8x0: clocking to 48000 [ 128.140916] b44.c:v1.01 (Jun 16, 2006) [ 128.140939] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 128.147807] eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:3f:e5:f1:e3 [ 128.250444] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0188] [ 128.377521] Yenta: ISA IRQ mask 0x04b8, PCI irq 17 [ 128.377527] Socket status: 30000006 [ 128.377530] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 128.377537] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 128.377541] cs: IO port probe 0x2000-0x2fff: clean. [ 128.377806] pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff [ 128.377809] pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x69ffffff [ 128.457569] ieee1394: Initialized config rom entry `ip1394' [ 128.464734] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19 [ 128.520656] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 128.596210] sdhci: Secure Digital Host Controller Interface driver, 0.12 [ 128.596215] sdhci: Copyright(c) Pierre Ossman [ 128.598807] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17) [ 128.598828] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18 [ 128.611709] mmc0: SDHCI at 0xdfcfc700 irq 18 DMA [ 128.700994] ieee80211_crypt: registered algorithm 'NULL' [ 128.709819] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 128.709823] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 128.725489] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq [ 128.725493] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 128.728127] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 128.728168] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 128.991270] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 129.800742] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc0002f116830] [ 130.146613] Real Time Clock Driver v1.12ac [ 130.174862] input: PC Speaker as /class/input/input3 [ 133.615643] ACPI: AC Adapter [AC] (off-line) [ 133.912047] ACPI: Battery Slot [BAT0] (battery present) [ 133.975273] ACPI: Lid Switch [LID] [ 133.975284] ACPI: Power Button (CM) [PBTN] [ 133.975290] ACPI: Sleep Button (CM) [SBTN] [ 134.132071] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 134.132079] ACPI: Processor [CPU0] (supports 8 throttling states) [ 134.132084] ACPI: Getting cpuindex for acpiid 0x1 [ 134.183835] ACPI: Thermal Zone [THM] (54 C) [ 134.199530] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 134.199927] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 134.199986] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 124.548000] Time: acpi_pm clocksource has been installed. [ 131.276000] pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. [ 131.276000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. [ 131.276000] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. [ 131.276000] cs: IO port probe 0x100-0x4ff: excluding 0x370-0x377 0x3f0-0x3f7 [ 131.280000] cs: IO port probe 0xc00-0xcf7: clean. [ 131.280000] cs: IO port probe 0xa00-0xaff: clean. [ 132.712000] NET: Registered protocol family 10 [ 132.712000] lo: Disabled Privacy Extensions [ 132.712000] IPv6 over IPv4 tunneling driver [ 132.948000] Bluetooth: Core ver 2.10 [ 132.948000] NET: Registered protocol family 31 [ 132.948000] Bluetooth: HCI device and connection manager initialized [ 132.948000] Bluetooth: HCI socket layer initialized [ 132.976000] Bluetooth: L2CAP ver 2.8 [ 132.976000] Bluetooth: L2CAP socket layer initialized [ 133.012000] Bluetooth: RFCOMM socket layer initialized [ 133.012000] Bluetooth: RFCOMM TTY layer initialized [ 133.012000] Bluetooth: RFCOMM ver 1.8