| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200609270315.30897.jesper.juhl@gmail.com> Date: Wed, 27 Sep 2006 03:15:30 +0200 From: Jesper Juhl <jesper.juhl@...il.com> To: Randy Dunlap <rdunlap@...otime.net> Cc: "Linux Kernel Mailing List" <linux-kernel@...r.kernel.org> Subject: Re: Tiny error in printk output for clocksource : a3:<6>Time: acpi_pm clocksource has been installed. On Wednesday 27 September 2006 02:54, Randy Dunlap wrote: > On Wed, 27 Sep 2006 02:36:58 +0200 Jesper Juhl wrote: > > > On Wednesday 27 September 2006 02:33, Randy Dunlap wrote: > > > On Wed, 27 Sep 2006 02:22:18 +0200 Jesper Juhl wrote: > > > > > > > I get this in dmesg with 2.6.18-git6 : > > > > a3:<6>Time: acpi_pm clocksource has been installed. > > > > > > > > Looks like some printk() somewhere is not adding \n correctly after > > > > outputting a message priority or a message priority too much is > > > > used... I've not investigated where this happens, but just wanted to > > > > report it. > > > > > > Hi, > > > How about posting (pasting) some of the message log before that? > > > > > Sure, below is the entire dmesg output from this boot of the box > > (including the line above) : > > OK, would you boot with "initcall_debug" on the kernel command > line and post the relevant output again, please? Sure thing : Real Time Clock Driver v1.12ac Calling initcall 0xc0491cc0: serial8250_init+0x0/0xf0() Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Calling initcall 0xc0491db0: serial8250_pci_init+0x0/0x20() Calling initcall 0xc0491f10: firmware_class_init+0x0/0x70() Calling initcall 0xc0492000: topology_sysfs_init+0x0/0x70() Calling initcall 0xc04928a0: floppy_init+0x0/0x620() Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Calling initcall 0xc0492ec0: rhine_init+0x0/0x20() via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker Calling initcall 0xc0492fd0: net_olddevs_init+0x0/0x40() ACPI: PCI Interrupt 0000:04:07.0[A] -> Calling initcall 0xc0493380: spi_transport_init+0x0/0x30() Calling initcall 0xc04933b0: fc_transport_init+0x0/0x40() Calling initcall 0xc04933f0: ahc_linux_init+0x0/0xa0() Calling initcall 0xc0493490: init_sd+0x0/0x70() Calling initcall 0xc0493500: init_sr+0x0/0x30() Calling initcall 0xc0493530: init_sg+0x0/0x90() Calling initcall 0xc04935c0: cdrom_init+0x0/0x10() Calling initcall 0xc0493710: i8042_init+0x0/0x90() serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Calling initcall 0xc04938c0: mousedev_init+0x0/0xe0() ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 19 mice: PS/2 mouse device common for all mice GSI 22 (level, low) -> IRQ 18 Calling initcall 0xc04939a0: atkbd_init+0x0/0x20() Calling initcall 0xc04939c0: psmouse_init+0x0/0x50() Calling initcall 0xc0493a10: edac_mc_init+0x0/0xe0() EDAC MC: Ver: 2.0.1 Sep 27 2006 Calling initcall 0xc0494010: init_acpi_pm_clocksource+0x0/0x110() Calling initcall 0xc0494150: init_soundcore+0x0/0x60() Calling initcall 0xc0496cf0: init_syncookies+0x0/0x20() Calling initcall 0xc0496d10: inet_diag_init+0x0/0x60() Calling initcall 0xc0496d70: tcp_diag_init+0x0/0x10() Calling initcall 0xc0496d80: cubictcp_register+0x0/0xc0() TCP cubic registered eth0: VIA Rhine II at 0xff5fec00, 00:50:ba:f2:a3:1d, IRQ 18. eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1. Calling initcall 0xc0496e40: af_unix_init+0x0/0x70() input: AT Translated Set 2 keyboard as /class/input/input0 NET: Registered protocol family 1 Calling initcall 0xc0496eb0: packet_init+0x0/0x4c() NET: Registered protocol family 17 Calling initcall 0xc047f2e0: amd_exit_cpu+0x0/0x20() Calling initcall 0xc047f9b0: cyrix_exit_cpu+0x0/0x20() Calling initcall 0xc047f9f0: nsc_exit_cpu+0x0/0x20() Calling initcall 0xc047fcb0: centaur_exit_cpu+0x0/0x20() Calling initcall 0xc047ff60: transmeta_exit_cpu+0x0/0x20() Calling initcall 0xc0480f90: rise_exit_cpu+0x0/0x20() Calling initcall 0xc0481040: nexgen_exit_cpu+0x0/0x20() Calling initcall 0xc0481090: umc_exit_cpu+0x0/0x20() Calling initcall 0xc0484900: check_nmi_watchdog+0x0/0x1b0() Calling initcall 0xc0484b70: init_lapic_nmi_sysfs+0x0/0x40() Calling initcall 0xc0484bf0: balanced_irq_init+0x0/0x1c0() Starting balanced_irq Calling initcall 0xc0486790: io_apic_bug_finalize+0x0/0x20() Calling initcall 0xc0487f30: print_ipi_mode+0x0/0x30() Using IPI Shortcut mode Calling initcall 0xc0489750: clocksource_done_booting+0x0/0x20() Calling initcall 0xc02449a0: acpi_poweroff_init+0x0/0x58()<6>Time: acpi_pm clocksource has been installed. Calling initcall 0xc0490cd0: seqgen_init+0x0/0x10() Calling initcall 0xc02eab10: net_random_reseed+0x0/0x70() Calling initcall 0xc0496a70: tcp_congestion_default+0x0/0x10() input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 -- Jesper Juhl <jesper.juhl@...il.com> - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists