Message-ID: <28bb77d30610121456t7f3738c6jf7be44ede5e59b4e@mail.gmail.com>
Date:	Thu, 12 Oct 2006 14:56:04 -0700
From:	"Steven Truong" <midair77@...il.com>
To:	linux-kernel@...r.kernel.org
Subject: Re: kdump/kexec/crash on vmcore file

There are weird things when this node booted up.  Here is the dmesg
for this node:

Linux version 2.6.18 (root@...e30) (gcc version 3.4.5 20051201 (Red
Hat 3.4.5-2)) #1 SMP Mon Oct 9 14:42:15 PDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
 BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ea070 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dffe0000 (usable)
 BIOS-e820: 00000000dffe0000 - 00000000dffef000 (ACPI data)
 BIOS-e820: 00000000dffef000 - 00000000dfff0000 (ACPI NVS)
 BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000f7740
ACPI: RSDT (v001 A M I  OEMRSDT  0x03000529 MSFT 0x00000097) @
0x00000000dffe0000
ACPI: FADT (v002 A M I  OEMFACP  0x03000529 MSFT 0x00000097) @
0x00000000dffe0200
ACPI: MADT (v001 A M I  OEMAPIC  0x03000529 MSFT 0x00000097) @
0x00000000dffe0390
ACPI: OEMB (v001 A M I  AMI_OEM  0x03000529 MSFT 0x00000097) @
0x00000000dffef040
ACPI: DSDT (v001  DVA4G DVA4G007 0x00000007 INTL 0x02002026) @
0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
On node 0 totalpages: 1028721
  DMA zone: 2641 pages, LIFO batch:0
  DMA32 zone: 897056 pages, LIFO batch:31
  Normal zone: 129024 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 20
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0b] address[0xfec10000] gsi_base[72])
IOAPIC[1]: apic_id 11, version 32, address 0xfec10000, GSI 72-95
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[2]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[3]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 1 zonelists.  Total pages: 1028721
Kernel command line: ro root=/dev/sda3  rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3200.198 MHz processor.
Console: colour VGA+ 80x25
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
                                 | spin |wlock |rlock |mutex | wsem | rsem |
  --------------------------------------------------------------------------
                     A-A deadlock:failed|failed|  ok  |failed|failed|failed|
                 A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
             A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
             A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
         A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
         A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
         A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
                    double unlock:  ok  |  ok  |failed|failed|failed|failed|
                  initialize held:failed|failed|failed|failed|failed|failed|
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |failed|
           recursive read-lock #2:             |  ok  |             |failed|
            mixed read-write-lock:             |failed|             |failed|
            mixed write-read-lock:             |failed|             |failed|
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
     soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
     hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
     soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
       sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
       sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
         hard-safe-A + irqs-on/12:failed|failed|  ok  |
         soft-safe-A + irqs-on/12:failed|failed|  ok  |
 hard-safe-A + irqs-on/21:failed|failed|  ok  |
         soft-safe-A + irqs-on/21:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
      hard-irq lock-inversion/123:failed|failed|  ok  |
      soft-irq lock-inversion/123:failed|failed|  ok  |
      hard-irq lock-inversion/132:failed|failed|  ok  |
      soft-irq lock-inversion/132:failed|failed|  ok  |
      hard-irq lock-inversion/213:failed|failed|  ok  |
      soft-irq lock-inversion/213:failed|failed|  ok  |
      hard-irq lock-inversion/231:failed|failed|  ok  |
      soft-irq lock-inversion/231:failed|failed|  ok  |
      hard-irq lock-inversion/312:failed|failed|  ok  |
      soft-irq lock-inversion/312:failed|failed|  ok  |
      hard-irq lock-inversion/321:failed|failed|  ok  |
      soft-irq lock-inversion/321:failed|failed|  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
--------------------------------------------------------
143 out of 218 testcases failed, as expected. |
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1669000 - 0x5669000
Memory: 4041340k/4718592k available (2376k kernel code, 152436k reserved, 1547k
data, 204k init)
Calibrating delay using timer specific routine.. 6405.21 BogoMIPS
(lpj=12810429)Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12500695
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x6
Initializing CPU#1
Calibrating delay using timer specific routine.. 6400.80 BogoMIPS
(lpj=12801613)CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
                  Intel(R) Xeon(TM) CPU 3.20GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 6400.98 BogoMIPS
(lpj=12801963)CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU2: Thermal monitoring enabled (TM1)
                  Intel(R) Xeon(TM) CPU 3.20GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x7
Initializing CPU#3
Calibrating delay using timer specific routine.. 6400.80 BogoMIPS
(lpj=12801609)CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU3: Thermal monitoring enabled (TM1)
                  Intel(R) Xeon(TM) CPU 3.20GHz stepping 03
Brought up 4 CPUs
testing NMI watchdog ... OK.
migration_cost=4,1290
checking if image is initramfs... it is
Freeing initrd memory: 963k freed
PM: Adding info for No Bus:platform
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
PM: Adding info for acpi:acpi
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PM: Adding info for No Bus:pci0000:00
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:06:02.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:03.0
PM: Adding info for pci:0000:00:1c.0
PM: Adding info for pci:0000:00:1d.0
PM: Adding info for pci:0000:00:1d.1
PM: Adding info for pci:0000:00:1d.4
PM: Adding info for pci:0000:00:1d.5
PM: Adding info for pci:0000:00:1d.7
PM: Adding info for pci:0000:00:1e.0
PM: Adding info for pci:0000:00:1f.0
PM: Adding info for pci:0000:00:1f.2
PM: Adding info for pci:0000:00:1f.3
PM: Adding info for pci:0000:01:00.0
PM: Adding info for pci:0000:01:00.2
PM: Adding info for pci:0000:05:01.0
PM: Adding info for pci:0000:05:02.0
PM: Adding info for pci:0000:06:02.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
PM: Adding info for pnp:00:0a
PM: Adding info for pnp:00:0b
PM: Adding info for pnp:00:0c
PM: Adding info for pnp:00:0d
PM: Adding info for pnp:00:0e
PM: Adding info for pnp:00:0f
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-GART: No AMD northbridge found.
pnp: 00:0a: ioport range 0x295-0x296 has been reserved
pnp: 00:0a: ioport range 0xb78-0xb7f has been reserved
pnp: 00:0d: ioport range 0x680-0x6ff has been reserved
PCI: Bridge: 0000:01:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.2
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: c000-cfff
  MEM window: fc900000-fc9fffff
  PREFETCH window: fc700000-fc7fffff
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: fca00000-feafffff
  PREFETCH window: e2000000-e20fffff
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:01:00.0 to 64
PCI: Setting latency timer of device 0000:01:00.2 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
PM: Adding info for platform:pcspkr
audit: initializing netlink socket (disabled)
audit(1160507947.196:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
Allocate Port Service[0000:00:02.0:pcie00]
PM: Adding info for pci_express:0000:00:02.0:pcie00
PCI: Setting latency timer of device 0000:00:03.0 to 64
Allocate Port Service[0000:00:03.0:pcie00]
PM: Adding info for pci_express:0000:00:03.0:pcie00
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
PM: Adding info for platform:vesafb.0
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PM: Adding info for platform:serial8250
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
PM: Adding info for serio:serio1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
Write protecting the kernel read-only data: 454k
SCSI subsystem initialized
input: AT Translated Set 2 keyboard as /class/input/input0
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
scsi0 : ata_piix
PM: Adding info for No Bus:host0
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
scsi1 : ata_piix
PM: Adding info for No Bus:host1
ata2.00: ATA-7, max UDMA/133, 156312576 sectors: LBA48
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
PM: Adding info for No Bus:target1:0:0
  Vendor: ATA       Model: WDC WD800JD-08LS  Rev: 07.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
PM: Adding info for scsi:1:0:0:0
SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 1:0:0:0: Attached scsi disk sda
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1160507949.120:2): selinux=0 auid=4294967295
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
FDC 0 is a post-1991 82077
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 74 (level, low) -> IRQ 18
e1000: 0000:05:01.0: e1000_validate_option: Receive Interrupt Delay set to 0
e1000: 0000:05:01.0: e1000_check_options: Interrupt Throttling Rate
(ints/sec) turned off
e1000: 0000:05:01.0: e1000_probe: (PCI:66MHz:32-bit) 00:30:48:83:12:66
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 75 (level, low) -> IRQ 19
e1000: 0000:05:02.0: e1000_probe: (PCI:66MHz:32-bit) 00:30:48:83:12:67
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
PM: Adding info for No Bus:i2c-0
i6300ESB timer: initialized (0xffffc20000004800). heartbeat=30 sec (nowayout=0)
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
PM: Adding info for No Bus:usbdev1.1_ep81
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev2.1_ep81
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ec00
PM: Adding info for usb:usb3
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev3.1_ep81
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
EXT3 FS on sda3, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@...hat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 5742364k swap on /dev/sda2.  Priority:-1 extents:1 across:5742364k
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
eth0: no IPv6 routers present
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists