[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <45354850.6050900@intel.com>
Date: Tue, 17 Oct 2006 14:17:04 -0700
From: Auke Kok <auke-jan.h.kok@...el.com>
To: Aleksey Gorelov <dared1st@...oo.com>
CC: Ryan Richter <ryan@....solarneutrino.net>,
Lukas Hejtmanek <xhejtman@...l.muni.cz>,
linux-kernel@...r.kernel.org, auke-jan.h.kok@...el.com,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
"Ronciak, John" <john.ronciak@...el.com>
Subject: Re: Machine restart doesn't work - Intel 965G, 2.6.19-rc2 / e1000?
Aleksey Gorelov wrote:
>
> --- Ryan Richter <ryan@....solarneutrino.net> wrote:
>> 2.6.19-rc1-git9 doesn't work any better for me. I haven't tried
>> unloading the e1000 module yet. Since I run the machine off an nfsroot,
>> it will require some creativity to test that.
>>
>> -ryan
>
> You may try the following patch instead if it's easier for you. It'll likely break suspend stuff,
> but you won't need to play around with modules.
>
> Aleks.
>
> --- linux-2.6.19-rc2/drivers/net/e1000/e1000_main.c.orig 2006-10-17 13:36:06.000000000 -0700
> +++ linux-2.6.19-rc2/drivers/net/e1000/e1000_main.c 2006-10-17 13:36:50.000000000 -0700
> @@ -4847,6 +4847,7 @@
> static void e1000_shutdown(struct pci_dev *pdev)
> {
> e1000_suspend(pdev, PMSG_SUSPEND);
> + pci_set_power_state(pdev, PCI_D0);
> }
>
> #ifdef CONFIG_NET_POLL_CONTROLLER
I wouldn't do that like this, since e1000_suspend already does a pci_set_power_state()
right before it exits, and doing two of those closely after another might result in an
undetermined state.
I would be more interested in forcing D3 state instead of the current
`pci_set_power_state(pdev, pci_choose_state(pdev, state));` in e1000_suspend, so can you
try this instead?
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ce0d35f..30ceeec 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -4793,7 +4793,7 @@ #endif
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
alternatively, you can try PCI_D3cold or PCI_D0, but setting the device to D0 is a
no-op: the device is already in D0 at run-time, so that's silly.
In any case: this is not a driver bug, but really (unfortunately) a platform issue, so
this fix is not suitable for general cases *at all*, and we'd have to validate this
nasty workaround on all other chipsets that e1000 supports too, something that ain't
going to happen I'm sure.
constructive: I've just spend some time working with e100+suspend+shutdown+netconsole,
so I'll audit e1000 for that in the next few weeks and make sure that all works
properly. Perhaps that yields something for you.
Cheers,
Auke
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists