lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20061019094419.GB3296@ff.dom.local>
Date:	Thu, 19 Oct 2006 11:44:19 +0200
From:	Jarek Poplawski <jarkao2@...pl>
To:	Steve Rottinger <steve@...tek.com>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: 2.6.18 Hard lockup advice needed: do_IRQ: stack overflow 508

On 18-10-2006 17:50, Steve Rottinger wrote:
> Hi,
> 
> I have a small Pentium 4 file server set up using version 2.6.18 of the 
> Kernel.  The system contains a SiI 3124 based SATA controller, and I 
> have a software RAID set up, with LVM enabled.   During normal daily 
> operation, the system is stable.    However, when I perform nightly 
> backups, and there is a lot of disk and network activity, as the data is 
> transferred to a backup server, the system eventually locks up.   
> Unfortunately, there is no indication of a failure in the system logs.   
> I also enabled the NMI_Watchdog without any additional visibility.    By 
> disabling the screen blanking on the console windows,  I do get a single 
> message reported before the lockup:
> 
> do_IRQ: stack overflow 508
> do_IRQ+0x69/0xbc 0xc0104ce4
> 
> If I downgrade to 2.6.17 of the Kernel, I see the same problem, but it 
> takes longer for it to occur.

You can try to change "Use 4Kb for kernel stacks instead of 8Kb" 
setting under "Kernel hacking" and if no result enable more
debugging options.

Jarek P.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ