Linux version 2.6.19-rc2 (root@orion) (gcc version 4.1.1 (Gentoo 4.1.1)) #3 PREEMPT Thu Oct 19 16:04:17 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001df70000 (usable) BIOS-e820: 000000001df70000 - 000000001df7c000 (ACPI data) BIOS-e820: 000000001df7c000 - 000000001df80000 (ACPI NVS) BIOS-e820: 000000001df80000 - 000000001e000000 (reserved) BIOS-e820: 000000002df80000 - 000000002e000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 479MB LOWMEM available. Entering add_active_range(0, 0, 122736) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 122736 early_node_map[1] active PFN ranges 0: 0 -> 122736 On node 0 totalpages: 122736 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 926 pages used for memmap Normal zone: 117714 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6fe0 ACPI: RSDT (v001 SONY K7 0x06040000 LTP 0x00000000) @ 0x1df774d1 ACPI: FADT (v001 SONY K7 0x06040000 PTL 0x000f4240) @ 0x1df7bf64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1df7bfd8 ACPI: DSDT (v001 SONY K7 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 30000000 (gap: 2e000000:d1f80000) Detected 2392.397 MHz processor. Built 1 zonelists. Total pages: 121778 Kernel command line: root=/dev/hda3 vga=0x318 video=vesafb:mtrr Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| double unlock: ok | ok |failed| ok |failed|failed| initialize held:failed|failed|failed|failed|failed|failed| bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | |failed| recursive read-lock #2: | ok | |failed| mixed read-write-lock: |failed| |failed| mixed write-read-lock: |failed| |failed| -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12:failed|failed| ok | soft-irqs-on + irq-safe-A/12:failed|failed| ok | hard-irqs-on + irq-safe-A/21:failed|failed| ok | soft-irqs-on + irq-safe-A/21:failed|failed| ok | sirq-safe-A => hirqs-on/12:failed|failed| ok | sirq-safe-A => hirqs-on/21:failed|failed| ok | hard-safe-A + irqs-on/12:failed|failed| ok | soft-safe-A + irqs-on/12:failed|failed| ok | hard-safe-A + irqs-on/21:failed|failed| ok | soft-safe-A + irqs-on/21:failed|failed| ok | hard-safe-A + unsafe-B #1/123:failed|failed| ok | soft-safe-A + unsafe-B #1/123:failed|failed| ok | hard-safe-A + unsafe-B #1/132:failed|failed| ok | soft-safe-A + unsafe-B #1/132:failed|failed| ok | hard-safe-A + unsafe-B #1/213:failed|failed| ok | soft-safe-A + unsafe-B #1/213:failed|failed| ok | hard-safe-A + unsafe-B #1/231:failed|failed| ok | soft-safe-A + unsafe-B #1/231:failed|failed| ok | hard-safe-A + unsafe-B #1/312:failed|failed| ok | soft-safe-A + unsafe-B #1/312:failed|failed| ok | hard-safe-A + unsafe-B #1/321:failed|failed| ok | soft-safe-A + unsafe-B #1/321:failed|failed| ok | hard-safe-A + unsafe-B #2/123:failed|failed| ok | soft-safe-A + unsafe-B #2/123:failed|failed| ok | hard-safe-A + unsafe-B #2/132:failed|failed| ok | soft-safe-A + unsafe-B #2/132:failed|failed| ok | hard-safe-A + unsafe-B #2/213:failed|failed| ok | soft-safe-A + unsafe-B #2/213:failed|failed| ok | hard-safe-A + unsafe-B #2/231:failed|failed| ok | soft-safe-A + unsafe-B #2/231:failed|failed| ok | hard-safe-A + unsafe-B #2/312:failed|failed| ok | soft-safe-A + unsafe-B #2/312:failed|failed| ok | hard-safe-A + unsafe-B #2/321:failed|failed| ok | soft-safe-A + unsafe-B #2/321:failed|failed| ok | hard-irq lock-inversion/123:failed|failed| ok | soft-irq lock-inversion/123:failed|failed| ok | hard-irq lock-inversion/132:failed|failed| ok | soft-irq lock-inversion/132:failed|failed| ok | hard-irq lock-inversion/213:failed|failed| ok | soft-irq lock-inversion/213:failed|failed| ok | hard-irq lock-inversion/231:failed|failed| ok | soft-irq lock-inversion/231:failed|failed| ok | hard-irq lock-inversion/312:failed|failed| ok | soft-irq lock-inversion/312:failed|failed| ok | hard-irq lock-inversion/321:failed|failed| ok | soft-irq lock-inversion/321:failed|failed| ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | -------------------------------------------------------- 142 out of 218 testcases failed, as expected. | ---------------------------------------------------- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 481312k/490944k available (2923k kernel code, 9088k reserved, 964k data, 184k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffff8000 - 0xfffff000 ( 28 kB) vmalloc : 0xde800000 - 0xffff6000 ( 535 MB) lowmem : 0xc0000000 - 0xddf70000 ( 479 MB) .init : 0xc0536000 - 0xc0564000 ( 184 kB) .data : 0xc03dadba - 0xc04cc00c ( 964 kB) .text : 0xc0100000 - 0xc03dadba (2923 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4786.48 BogoMIPS (lpj=2393240) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0c00) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 8000-803f claimed by ali7101 ACPI PCI quirk: region 8040-805f claimed by ali7101 SMB Boot video device is 0000:01:05.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 *10 11) ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11 ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 *11) ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 11) *0, disabled. ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:05: ioport range 0x40b-0x40b has been reserved pnp: 00:05: ioport range 0x480-0x48f has been reserved pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:05: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:05: ioport range 0x8000-0x807f could not be reserved ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[f0404000-f04047ff] Max Packet=[2048] IR/IT contexts=[4/4] PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: f0500000-f05fffff PREFETCH window: f8000000-fbffffff PCI: Bus 2, cardbus bridge: 0000:00:0a.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bus 6, cardbus bridge: 0000:00:0a.1 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 34000000-35ffffff MEM window: 36000000-37ffffff ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. Initializing RT-Tester: OK audit: initializing netlink socket (disabled) audit(1161275627.516:1): initialized Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/W]. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Activating ISA DMA hang workarounds. vesafb: framebuffer at 0xf8000000, mapped to 0xde880000, using 4608k, total 32704k vesafb: mode is 1024x768x24, linelength=3072, pages=13 vesafb: protected mode interface info at c000:51eb vesafb: pmi: set display start = c00c527f, set palette = c00c52cb vesafb: pmi: ports = a010 a016 a054 a038 a03c a05c a000 a004 a0b0 a0b2 a0b4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PBTN] ACPI: Lid Switch [LID] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [TZ01] (50 C) lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected Ati IGP345M chipset agpgart: AGP aperture is 64M @ 0xf4000000 [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.25.0 20060524 on minor 0 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:0f.0 ACPI: Unable to derive IRQ for device 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI ALI15X3: chipset revision 196 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x80c0-0x80c7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x80c8-0x80cf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HITACHI_DK23EA-30, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301683fec] hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt 0000:00:0c.2[C] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10 PCI: VIA IRQ fixup for 0000:00:0c.2, from 11 to 10 ehci_hcd 0000:00:0c.2: EHCI Host Controller ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0c.2: irq 10, io mem 0xf0404800 ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:0c.0: UHCI Host Controller uhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:0c.0: irq 11, io base 0x00008080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:0c.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:0c.1: UHCI Host Controller uhci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:0c.1: irq 10, io base 0x000080a0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-2: new low speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Logitech USB-PS/2 Optical Mouse as /class/input/input0 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0c.0-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EDAC MC: Ver: 2.0.1 Oct 19 2006 Advanced Linux Sound Architecture Driver Version 1.0.13 (Fri Oct 06 18:28:19 2006 UTC). ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11 input: AT Translated Set 2 keyboard as /class/input/input1 input: PS/2 Mouse as /class/input/input2 input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 AC'97 1 does not respond - RESET AC'97 1 access is not valid [0xffffffff], removing mixer. ali mixer 1 creating error. ALSA device list: #0: ALI 5451 at 0x8800, irq 11 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. ACPI: (supports S0 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 184k freed warning: process `touch' used the removed sysctl system call warning: process `touch' used the removed sysctl system call warning: process `touch' used the removed sysctl system call EXT3 FS on hda3, internal journal warning: process `touch' used the removed sysctl system call Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k warning: process `touch' used the removed sysctl system call Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8158] Yenta: ISA IRQ mask 0x0028, PCI irq 11 Socket status: 30000006 Yenta: CardBus bridge found at 0000:00:0a.1 [104d:8158] Yenta: ISA IRQ mask 0x0028, PCI irq 10 Socket status: 30000410 pccard: PCMCIA card inserted into slot 1 pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x3f8-0x3ff cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x3f8-0x3ff cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. orinoco 0.15 (David Gibson , Pavel Roskin , et al) orinoco_cs 0.15 (David Gibson , Pavel Roskin , et al) pcmcia: registering new device pcmcia1.0 eth0: Hardware identity 0001:0001:0004:0000 eth0: Station identity 001f:0001:0008:0048 eth0: Firmware determined as Lucent/Agere 8.72 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:E0:63:82:2D:3F eth0: Station name "HERMES I" eth0: ready eth0: orinoco_cs at 1.0, irq 3, io 0x0100-0x013f slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f4e410 ======================= dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f4e410 ======================= dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f96410 ======================= dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f96410 ======================= dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f8a410 ======================= dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f8a410 ======================= dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200. eth0: New link status: Connected (0001) slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7fa2410 ======================= dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f2c410 ======================= dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f2c410 ======================= dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7eef410 ======================= dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7eef410 ======================= dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200. slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten [] dump_trace+0x1c1/0x1f1 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x14 [] dump_stack+0x19/0x1b [] __slab_error+0x26/0x28 [] cache_free_debugcheck+0x13d/0x1d8 [] kfree+0x54/0xa5 [] ioctl_standard_call+0x187/0x2a1 [] wireless_process_ioctl+0x328/0x3c7 [] dev_ioctl+0x1fd/0x372 [] sock_ioctl+0x34/0x1e8 [] do_ioctl+0x22/0x71 [] vfs_ioctl+0x55/0x29b [] sys_ioctl+0x33/0x50 [] sysenter_past_esp+0x56/0x79 [] 0xb7f59410 ======================= dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200. mtrr: 0xf8000000,0x4000000 overlaps existing 0xf8000000,0x2000000 mtrr: 0xf8000000,0x4000000 overlaps existing 0xf8000000,0x2000000 mtrr: 0xf8000000,0x4000000 overlaps existing 0xf8000000,0x2000000 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode [drm] Setting GART location based on old memory map [drm] writeback test succeeded in 1 usecs agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode