lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20061021100207.fdc240e0.akpm@osdl.org>
Date:	Sat, 21 Oct 2006 10:02:07 -0700
From:	Andrew Morton <akpm@...l.org>
To:	Norbert Preining <preining@...ic.at>
Cc:	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	Michael Chan <mchan@...adcom.com>
Subject: Re: tg3 kernel bug in 2.6.18-mm3 and 2.6.19-rc2-mm2


cc's added.

On Sat, 21 Oct 2006 15:22:39 +0200
Norbert Preining <preining@...ic.at> wrote:

> Hi all!
> 
> I get the same bug again and again, always when ifplugd is started:
> 
> tg3: eth0: No firmware running.
> BUG: soft lockup detected on CPU#0!
>  [<c0103ec7>] dump_trace+0x68/0x1b4
>  [<c010402b>] show_trace_log_lvl+0x18/0x2c
>  [<c010463a>] show_trace+0xf/0x11
>  [<c010469d>] dump_stack+0x12/0x14
>  [<c0141cb3>] softlockup_tick+0xaa/0xc1
>  [<c0129bad>] update_process_times+0x3b/0x5e
>  [<c01362a1>] handle_update_profile+0x14/0x1e
>  [<c0115956>] smp_apic_timer_interrupt+0x49/0x5b
>  [<c0103998>] apic_timer_interrupt+0x28/0x30
> DWARF2 unwinder stuck at apic_timer_interrupt+0x28/0x30
> Leftover inexact backtrace:
>  [<c01d03af>] delay_tsc+0xb/0x13
>  [<c01d03e0>] __delay+0x6/0x7
>  [<c022ce12>] tg3_readphy+0x6e/0xd5
>  [<c022e0d1>] tg3_setup_copper_phy+0x30b/0xa15
>  [<c01064d9>] profile_pc+0x24/0x53
>  [<c022f475>] tg3_setup_phy+0xc9a/0xd1f
>  [<c0103998>] apic_timer_interrupt+0x28/0x30
>  [<c022c240>] _tw32_flush+0x3f/0x51
>  [<c022dc4a>] tg3_write_mem+0xcf/0xe7
>  [<c0231683>] tg3_reset_hw+0x10ab/0x13a0
>  [<c01d03e0>] __delay+0x6/0x7
>  [<c01d03e0>] __delay+0x6/0x7
>  [<c022c240>] _tw32_flush+0x3f/0x51
>  [<c01d03e0>] __delay+0x6/0x7
>  [<c022da97>] tg3_switch_clocks+0x8f/0x93
>  [<c0237673>] tg3_open+0x250/0x520
>  [<c02d3263>] dev_open+0x2b/0x62
>  [<c02d1dd8>] dev_change_flags+0x47/0xe4
>  [<c0307fcc>] devinet_ioctl+0x252/0x556
>  [<c02d2e5a>] dev_ifsioc+0x113/0x38d
>  [<c02d29c4>] dev_load+0x24/0x4b
>  [<c02c90c7>] sock_ioctl+0x0/0x1c2
>  [<c02c9265>] sock_ioctl+0x19e/0x1c2
>  [<c02ca151>] sock_map_fd+0x41/0x4a
>  [<c02c90c7>] sock_ioctl+0x0/0x1c2
>  [<c01684bb>] do_ioctl+0x1f/0x62
>  [<c0168743>] vfs_ioctl+0x245/0x257
>  [<c0168788>] sys_ioctl+0x33/0x4b
>  [<c0102f40>] syscall_call+0x7/0xb
>  =======================
> 
> With  2.6.19-rc2 (no -mm) it does not happen.
> 
> Normal dmesg gives:
> tg3.c:v3.66 (September 23, 2006)
> PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base
> T Ethernet 00:16:36:1e:27:ad
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
> eth0: dma_rwctrl[76180000] dma_mask[64-bit]
> 


There are tg3 changes in -mm, but I doubt it they caused this hang.

Can you test 2.6.19-rc2 plus the below?

Thanks.

--- linux-2.6.19-rc2/drivers/net/tg3.c	2006-10-13 10:35:00.000000000 -0700
+++ devel/drivers/net/tg3.c	2006-10-21 09:34:42.000000000 -0700
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.66"
-#define DRV_MODULE_RELDATE	"September 23, 2006"
+#define DRV_MODULE_VERSION	"3.67"
+#define DRV_MODULE_RELDATE	"October 18, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -129,7 +129,7 @@
 #define RX_JUMBO_PKT_BUF_SZ	(9046 + tp->rx_offset + 64)
 
 /* minimum number of free TX descriptors required to wake up TX process */
-#define TG3_TX_WAKEUP_THRESH		(TG3_TX_RING_SIZE / 4)
+#define TG3_TX_WAKEUP_THRESH(tp)		((tp)->tx_pending / 4)
 
 /* number of ETHTOOL_GSTATS u64's */
 #define TG3_NUM_STATS		(sizeof(struct tg3_ethtool_stats)/sizeof(u64))
@@ -3075,10 +3075,10 @@ static void tg3_tx(struct tg3 *tp)
 	smp_mb();
 
 	if (unlikely(netif_queue_stopped(tp->dev) &&
-		     (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))) {
+		     (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp)))) {
 		netif_tx_lock(tp->dev);
 		if (netif_queue_stopped(tp->dev) &&
-		    (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))
+		    (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp)))
 			netif_wake_queue(tp->dev);
 		netif_tx_unlock(tp->dev);
 	}
@@ -3928,7 +3928,7 @@ static int tg3_start_xmit(struct sk_buff
 	tp->tx_prod = entry;
 	if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
 		netif_stop_queue(dev);
-		if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)
+		if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp))
 			netif_wake_queue(tp->dev);
 	}
 
@@ -4143,7 +4143,7 @@ static int tg3_start_xmit_dma_bug(struct
 	tp->tx_prod = entry;
 	if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
 		netif_stop_queue(dev);
-		if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)
+		if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp))
 			netif_wake_queue(tp->dev);
 	}
 
@@ -8106,7 +8106,10 @@ static int tg3_set_ringparam(struct net_
 
 	if ((ering->rx_pending > TG3_RX_RING_SIZE - 1) ||
 	    (ering->rx_jumbo_pending > TG3_RX_JUMBO_RING_SIZE - 1) ||
-	    (ering->tx_pending > TG3_TX_RING_SIZE - 1))
+	    (ering->tx_pending > TG3_TX_RING_SIZE - 1) ||
+	    (ering->tx_pending <= MAX_SKB_FRAGS) ||
+	    ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_1_BUG) &&
+	     (ering->tx_pending <= (MAX_SKB_FRAGS * 3))))
 		return -EINVAL;
 
 	if (netif_running(dev)) {

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ