| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Oct 2006 01:55:02 -0700
From: "Om Narasimhan" <om.turyx@...il.com>
To: linux-kernel@...r.kernel.org
Subject: HPET : Legacy Route replacement patch.
HI,
This patch enables the legacy routing replacement capabilities of the HPET.
HPET spec is available at www.intel.com/technology/architecture/hpetspec.htm
Background : HPET is capable of replacing the IRQ0 (connected INT0
PIN) timer interrupt. The capability register (at offset 0 of HPET
base address) has a bit specifying if HPET chip is capbale of doing
this. OS can read the bit either from HW or ACPI table. (HPET ACPI
description table -> Event Timer block -> bit 15, page 30 of HPET
spec). Ideally, I think BIOS should set the ACPI table than letting
the OS read H/W, which gives the BIOS a way to configure either legacy
or Legacy replacement modes.
But a number of bioses (both phoenix and AMI) are not working as
expected. So I have provided a command line parameter which overrides
the BIOS ACPI entry. So, irrespctive of the BIOS' HPET ACPI Descriptor
table settings, if the parameter hpet_lrr=[0,1] is specified, it takes
precedence.
It seems, some other chipsets (CK-804) has a timing problem, as a
result of which the machine hangs. In this case, I have passed the
parameter lpj=<approx bogomips value * 500> which solves this issue. I
am investigating into this further and would try fixing it.
Even though compile tested, on 2.6.19-XX I have not tested this patch.
I ran this on 2.6.16-rc5, which is the latest version that runs on my
machine (sunfire 4600).
Patch here...
Signed-off-by: Om Narasimhan <om.turyx@...il.com>
----
arch/i386/kernel/acpi/boot.c | 13 +++++++++++++
arch/i386/kernel/time_hpet.c | 3 ++-
arch/x86_64/kernel/time.c | 15 +++++++++++++--
include/asm-x86_64/hpet.h | 1 +
include/linux/acpi.h | 1 +
5 files changed, 30 insertions(+), 3 deletions(-)
arch/i386/kernel/acpi/boot.c | 13 +++++++++++++
arch/i386/kernel/time_hpet.c | 3 ++-
arch/x86_64/kernel/time.c | 15 +++++++++++++--
include/asm-x86_64/hpet.h | 1 +
include/linux/acpi.h | 1 +
5 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index ab974ff..228d2b5 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -82,6 +82,15 @@ EXPORtested T_SYMBOL(acpi_strict);
acpi_interrupt_flags acpi_sci_flags __initdata;
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
+int acpi_hpet_lrr; /* the HPET Legacy routing replacement option
passed through ACPI Table */
+int hpet_lrr_force; /* cmdlinetested opt. for faulty bioses not
setting ACPI HPET entry right */
+
+static int hpet_lrr_setup (char *str)
+{
+ get_option(&str,&hpet_lrr_force);
+ return 1;
+}
+__setup ("hpet_lrr=", hpet_lrr_setup);
#ifdef CONFIG_X86_LOCAL_APIC
static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
@@ -669,6 +678,10 @@ #define HPET_RESOURCE_NAME_SIZE 9
"HPET %u", hpet_tbl->number);
hpet_res->end = (1 * 1024) - 1;
}
+ acpi_hpet_lrr = (hpet_tbl->id & ACPI_HPET_LRR_CAP) ? 1 : 0;
+ /* Print a message to warn about the bios BUG if HPET ACPI is not
correctly populated */
+ printk(KERN_INFO PREFIX "HPET id: %#x. ACPI LRR bit %s SET\n",
+ hpet_tbl->id, acpi_hpet_lrr ? "": "NOT");
#ifdef CONFIG_X86_64
vxtime.hpet_address = hpet_tbl->addr.addrl |
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
index 1a2a979..01b2f67 100644
--- a/arch/i386/kernel/time_hpet.c
+++ b/arch/i386/kernel/time_hpet.c
@@ -94,7 +94,8 @@ static int hpet_timer_stop_set_go(unsign
* Go!
*/
cfg = hpet_readl(HPET_CFG);
- if (hpet_use_timer)
+ /* Ideally the following should be &&(acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_use_timer && hpet_lrr_force)
cfg |= HPET_CFG_LEGACY;
cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 1ba5a44..3417c0f 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void);
#endif
extern void i8254_timer_resume(void);
extern int using_apic_timer;
+extern int acpi_hpet_lrr;
+extern int hpet_lrr_force;
static char *timename = NULL;
@@ -783,7 +785,10 @@ static int hpet_timer_stop_set_go(unsign
HPET_TN_32BIT, HPET_T0_CFG);
hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */
hpet_writel(hpet_tick, HPET_T0_CMP); /* period */
- cfg |= HPET_CFG_LEGACY;
+ /* Ideally the following should be (acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_lrr_force)
+ cfg |= HPET_CFG_LEGACY;
+
}
/*
* Go!
@@ -887,6 +892,7 @@ time_cpu_notifier(struct notifier_block
void __init time_init(void)
{
+ int timer_irq = 0;
if (nohpet)
vxtime.hpet_address = 0;
@@ -906,6 +912,10 @@ void __init time_init(void)
tick_nsec = TICK_NSEC_HPET;
cpu_khz = hpet_calibrate_tsc();
timename = "HPET";
+ /* Ideally the following should be (acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_lrr_force)
+ timer_irq = HPET_TIMER_LRR_IRQ;
+
#ifdef CONFIG_X86_PM_TIMER
} else if (pmtmr_ioport && !vxtime.hpet_address) {
vxtime_hz = PM_TIMER_FREQUENCY;
@@ -924,7 +934,8 @@ #endif
vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
set_cyc2ns_scale(cpu_khz);
- setup_irq(0, &irq0);
+ printk (KERN_WARNING PREFIX "Registering Timer IRQ = %d\n", timer_irq);
+ setup_irq(timer_irq, &irq0);
hotcpu_notifier(time_cpu_notifier, 0);
time_cpu_notifier(NULL, CPU_ONLINE, (void *)(long)smp_processor_id());
diff --git a/include/asm-x86_64/hpet.h b/include/asm-x86_64/hpet.h
index b390984..2d18b39 100644
--- a/include/asm-x86_64/hpet.h
+++ b/include/asm-x86_64/hpet.h
@@ -37,6 +37,7 @@ #define HPET_CFG_ENABLE 0x001
#define HPET_CFG_LEGACY 0x002
#define HPET_LEGACY_8254 2
#define HPET_LEGACY_RTC 8
+#define HPET_TIMER_LRR_IRQ 2
#define HPET_TN_LEVEL 0x0002
#define HPET_TN_ENABLE 0x0004
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 2b0c955..62dab08 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -220,6 +220,7 @@ enum acpi_interrupt_id {
};
#define ACPI_SPACE_MEM 0
+#define ACPI_HPET_LRR_CAP 0x8000
struct acpi_gen_regaddr {
u8 space_id;
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index ab974ff..228d2b5 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -82,6 +82,15 @@ EXPORtested T_SYMBOL(acpi_strict);
acpi_interrupt_flags acpi_sci_flags __initdata;
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
+int acpi_hpet_lrr; /* the HPET Legacy routing replacement option
passed through ACPI Table */
+int hpet_lrr_force; /* cmdlinetested opt. for faulty bioses not
setting ACPI HPET entry right */
+
+static int hpet_lrr_setup (char *str)
+{
+ get_option(&str,&hpet_lrr_force);
+ return 1;
+}
+__setup ("hpet_lrr=", hpet_lrr_setup);
#ifdef CONFIG_X86_LOCAL_APIC
static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
@@ -669,6 +678,10 @@ #define HPET_RESOURCE_NAME_SIZE 9
"HPET %u", hpet_tbl->number);
hpet_res->end = (1 * 1024) - 1;
}
+ acpi_hpet_lrr = (hpet_tbl->id & ACPI_HPET_LRR_CAP) ? 1 : 0;
+ /* Print a message to warn about the bios BUG if HPET ACPI is not
correctly populated */
+ printk(KERN_INFO PREFIX "HPET id: %#x. ACPI LRR bit %s SET\n",
+ hpet_tbl->id, acpi_hpet_lrr ? "": "NOT");
#ifdef CONFIG_X86_64
vxtime.hpet_address = hpet_tbl->addr.addrl |
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
index 1a2a979..01b2f67 100644
--- a/arch/i386/kernel/time_hpet.c
+++ b/arch/i386/kernel/time_hpet.c
@@ -94,7 +94,8 @@ static int hpet_timer_stop_set_go(unsign
* Go!
*/
cfg = hpet_readl(HPET_CFG);
- if (hpet_use_timer)
+ /* Ideally the following should be &&(acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_use_timer && hpet_lrr_force)
cfg |= HPET_CFG_LEGACY;
cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 1ba5a44..3417c0f 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void);
#endif
extern void i8254_timer_resume(void);
extern int using_apic_timer;
+extern int acpi_hpet_lrr;
+extern int hpet_lrr_force;
static char *timename = NULL;
@@ -783,7 +785,10 @@ static int hpet_timer_stop_set_go(unsign
HPET_TN_32BIT, HPET_T0_CFG);
hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */
hpet_writel(hpet_tick, HPET_T0_CMP); /* period */
- cfg |= HPET_CFG_LEGACY;
+ /* Ideally the following should be (acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_lrr_force)
+ cfg |= HPET_CFG_LEGACY;
+
}
/*
* Go!
@@ -887,6 +892,7 @@ time_cpu_notifier(struct notifier_block
void __init time_init(void)
{
+ int timer_irq = 0;
if (nohpet)
vxtime.hpet_address = 0;
@@ -906,6 +912,10 @@ void __init time_init(void)
tick_nsec = TICK_NSEC_HPET;
cpu_khz = hpet_calibrate_tsc();
timename = "HPET";
+ /* Ideally the following should be (acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_lrr_force)
+ timer_irq = HPET_TIMER_LRR_IRQ;
+
#ifdef CONFIG_X86_PM_TIMER
} else if (pmtmr_ioport && !vxtime.hpet_address) {
vxtime_hz = PM_TIMER_FREQUENCY;
@@ -924,7 +934,8 @@ #endif
vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
set_cyc2ns_scale(cpu_khz);
- setup_irq(0, &irq0);
+ printk (KERN_WARNING PREFIX "Registering Timer IRQ = %d\n", timer_irq);
+ setup_irq(timer_irq, &irq0);
hotcpu_notifier(time_cpu_notifier, 0);
time_cpu_notifier(NULL, CPU_ONLINE, (void *)(long)smp_processor_id());
diff --git a/include/asm-x86_64/hpet.h b/include/asm-x86_64/hpet.h
index b390984..2d18b39 100644
--- a/include/asm-x86_64/hpet.h
+++ b/include/asm-x86_64/hpet.h
@@ -37,6 +37,7 @@ #define HPET_CFG_ENABLE 0x001
#define HPET_CFG_LEGACY 0x002
#define HPET_LEGACY_8254 2
#define HPET_LEGACY_RTC 8
+#define HPET_TIMER_LRR_IRQ 2
#define HPET_TN_LEVEL 0x0002
#define HPET_TN_ENABLE 0x0004
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 2b0c955..62dab08 100644
--- a/include/linux/acpi.h arch/i386/kernel/acpi/boot.c | 13 +++++++++++++
arch/i386/kernel/time_hpet.c | 3 ++-
arch/x86_64/kernel/time.c | 15 +++++++++++++--
include/asm-x86_64/hpet.h | 1 +
include/linux/acpi.h | 1 +
5 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index ab974ff..228d2b5 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -82,6 +82,15 @@ EXPORtested T_SYMBOL(acpi_strict);
acpi_interrupt_flags acpi_sci_flags __initdata;
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
+int acpi_hpet_lrr; /* the HPET Legacy routing replacement option
passed through ACPI Table */
+int hpet_lrr_force; /* cmdlinetested opt. for faulty bioses not
setting ACPI HPET entry right */
+
+static int hpet_lrr_setup (char *str)
+{
+ get_option(&str,&hpet_lrr_force);
+ return 1;
+}
+__setup ("hpet_lrr=", hpet_lrr_setup);
#ifdef CONFIG_X86_LOCAL_APIC
static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
@@ -669,6 +678,10 @@ #define HPET_RESOURCE_NAME_SIZE 9
"HPET %u", hpet_tbl->number);
hpet_res->end = (1 * 1024) - 1;
}
+ acpi_hpet_lrr = (hpet_tbl->id & ACPI_HPET_LRR_CAP) ? 1 : 0;
+ /* Print a message to warn about the bios BUG if HPET ACPI is not
correctly populated */
+ printk(KERN_INFO PREFIX "HPET id: %#x. ACPI LRR bit %s SET\n",
+ hpet_tbl->id, acpi_hpet_lrr ? "": "NOT");
#ifdef CONFIG_X86_64
vxtime.hpet_address = hpet_tbl->addr.addrl |
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
index 1a2a979..01b2f67 100644
--- a/arch/i386/kernel/time_hpet.c
+++ b/arch/i386/kernel/time_hpet.c
@@ -94,7 +94,8 @@ static int hpet_timer_stop_set_go(unsign
* Go!
*/
cfg = hpet_readl(HPET_CFG);
- if (hpet_use_timer)
+ /* Ideally the following should be &&(acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_use_timer && hpet_lrr_force)
cfg |= HPET_CFG_LEGACY;
cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 1ba5a44..3417c0f 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void);
#endif
extern void i8254_timer_resume(void);
extern int using_apic_timer;
+extern int acpi_hpet_lrr;
+extern int hpet_lrr_force;
static char *timename = NULL;
@@ -783,7 +785,10 @@ static int hpet_timer_stop_set_go(unsign
HPET_TN_32BIT, HPET_T0_CFG);
hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */
hpet_writel(hpet_tick, HPET_T0_CMP); /* period */
- cfg |= HPET_CFG_LEGACY;
+ /* Ideally the following should be (acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_lrr_force)
+ cfg |= HPET_CFG_LEGACY;
+
}
/*
* Go!
@@ -887,6 +892,7 @@ time_cpu_notifier(struct notifier_block
void __init time_init(void)
{
+ int timer_irq = 0;
if (nohpet)
vxtime.hpet_address = 0;
@@ -906,6 +912,10 @@ void __init time_init(void)
tick_nsec = TICK_NSEC_HPET;
cpu_khz = hpet_calibrate_tsc();
timename = "HPET";
+ /* Ideally the following should be (acpi_hpet_lrr || hpet_lrr_force) */
+ if (hpet_lrr_force)
+ timer_irq = HPET_TIMER_LRR_IRQ;
+
#ifdef CONFIG_X86_PM_TIMER
} else if (pmtmr_ioport && !vxtime.hpet_address) {
vxtime_hz = PM_TIMER_FREQUENCY;
@@ -924,7 +934,8 @@ #endif
vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
set_cyc2ns_scale(cpu_khz);
- setup_irq(0, &irq0);
+ printk (KERN_WARNING PREFIX "Registering Timer IRQ = %d\n", timer_irq);
+ setup_irq(timer_irq, &irq0);
hotcpu_notifier(time_cpu_notifier, 0);
time_cpu_notifier(NULL, CPU_ONLINE, (void *)(long)smp_processor_id());
diff --git a/include/asm-x86_64/hpet.h b/include/asm-x86_64/hpet.h
index b390984..2d18b39 100644
--- a/include/asm-x86_64/hpet.h
+++ b/include/asm-x86_64/hpet.h
@@ -37,6 +37,7 @@ #define HPET_CFG_ENABLE 0x001
#define HPET_CFG_LEGACY 0x002
#define HPET_LEGACY_8254 2
#define HPET_LEGACY_RTC 8
+#define HPET_TIMER_LRR_IRQ 2
#define HPET_TN_LEVEL 0x0002
#define HPET_TN_ENABLE 0x0004
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 2b0c955..62dab08 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -220,6 +220,7 @@ enum acpi_interrupt_id {
};
#define ACPI_SPACE_MEM 0
+#define ACPI_HPET_LRR_CAP 0x8000
struct acpi_gen_regaddr {
u8 space_id;
+++ b/include/linux/acpi.h
@@ -220,6 +220,7 @@ enum acpi_interrupt_id {
};
#define ACPI_SPACE_MEM 0
+#define ACPI_HPET_LRR_CAP 0x8000
struct acpi_gen_regaddr {
u8 space_id;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists