Message-ID: <E8C008223DD5F64485DFBDF6D4B7F71D020C69E4@msgswbmnmsp25.wellsfargo.com>
Date:	Wed, 25 Oct 2006 15:08:55 -0500
From:	<Greg.Chandler@...lsfargo.com>
To:	<dtor@...ightbb.com>
Cc:	<linux-kernel@...r.kernel.org>,
	<linux-input@...ey.karlin.mff.cuni.cz>
Subject: RE: Touchscreen hardware hacking/driver hacking.


I've been thinking about the code I added:
        {
                .ident = "FLORA-ie 55mi",
                .matches = {
                        DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"),
                },
        },

That's nice and all that it works, but I'd like to make it work for all
models.  Some don't return the same strings, but do have the same
hardware.  I noticed the same thing with your lifebook models.
I can't find the definition for "DMI_MATCH", of if I did, I sure don't
understand it.  What I'd like to do is something along the lines of:

const char* UPCASEME(string str)
  {
    for (int x = 0; x < str.size(); x = x + 1)
      {
        str[x] = toupper(str[x]);
      }
    return str.c_str();
  }

{
  if (strncmp(UPCASEME(DMI_PRODUCT_NAME), UPCASEME("FLORA-ie ") ,9) ==
0)
    {
      .ident = "FLORA-ie 55mi",
      .matches = { DMI_MATCH(UPCASEME(DMI_PRODUCT_NAME),
UPCASEME("FLORA-ie ")) },
    }
  else if (strncmp(UPCASEME(DMI_PRODUCT_NAME), UPCASEME("LifeBook B")
,10) == 0)
    {
      .ident = "LifeBook B",
      .matches = { DMI_MATCH(UPCASEME(DMI_PRODUCT_NAME),
UPCASEME("LifeBook B")) },
    }
  else
    {
    }
}
 

Now that I have looked at it {going over my code to see if it should
work I saw this in drivers/firmware/dmi_scan.c:
/**
 *      dmi_check_system - check system DMI data
 *      @list: array of dmi_system_id structures to match against
 *              All non-null elements of the list must match
 *              their slot's (field index's) data (i.e., each
 *              list string must be a substring of the specified
 *              DMI slot's string data) to be considered a
 *              successful match.
 *
 *      Walk the blacklist table running matching functions until
someone
 *      returns non zero or we hit the end. Callback function is called
for
 *      each successful match. Returns the number of matches.
 */
int dmi_check_system(struct dmi_system_id *list)

If this is true, maybe that function should be changed to make it
case-insensitive?
If so then, 4 of the pre-existing cases can be summed up as "LifeBook
B", and all of the Flora-ie tablets can be listed as a single entry as
well.

I know somone will object to this as a dangerous assumption that all
models, or all spellings are the same.  Byt the time the flames hit, I
should have my asbestos armour out and ready.  However, I know for a
fact that all of the Hitachi tablets do have this, and for what I have
read so do the lifebooks.  My opinion is that "it's only a PS/2" driver,
what could go wrong.  I'm no kernel developer, and not much of a
developer in general so, now that I've erected the lightning rod I guess
it's time for discussion?

What do you guys think?













-----Original Message-----
From: dmitry.torokhov@...il.com [mailto:dmitry.torokhov@...il.com] On
Behalf Of Dmitry Torokhov
Sent: Tuesday, October 17, 2006 4:12 PM
To: Chandler, Greg
Cc: linux-kernel@...r.kernel.org; linux-input@...ey.karlin.mff.cuni.cz
Subject: Re: Touchscreen hardware hacking/driver hacking.

On 10/17/06, Greg.Chandler@...lsfargo.com <Greg.Chandler@...lsfargo.com>
wrote:
>
> I'm working on a prototype Hitachi tablet, it uses a Fujitsu 4-wire 
> resistive touchscreen. {10.4" I think} I've found that windows-xp 
> embedded uses a generic ps/2 driver for the device.
>
> I've ripped this thing to pieces on several occasions looking for 
> chips to help the porting, my problem is that I can not find the 
> analog-digital converter for this thing.  The connector goes to a 
> surface mount header on an 8 layer board.
> I loose the traces almost instantly.  Given that I can't find the 
> converter anywhere what should I do next?
>
> I've done my homework and found that this HAS to be either serial or 
> usb attached according to Fujitsu.
> Aparently it's neither.  There are no unknown USB devices {or known 
> matching}, and there is no activity on the single serial port on the 
> system.  Since the windows driver uses PS/2 as the interface I have a 
> horrible feeling this thing has an interpretation layer that makes it 
> a
> PS/2 mouse, and that may or may not royally be a nightmare.
>

The touchscreen might need a "magic knock" to activate. You might try to
see what data wondows driver sends to PS/2 port.

Also check of Lifebook touchscreen protocol will work for you. You will
need to adjust DMI table in drivers/input/mouse/lifebook.c/

> I would have posted this to a different group but there is no "input"
> mailing list.
>

linux-input@...ey.karlin.mff.cuni.cz

But you must be subscribed to post otherwise list just drops your mails
on the floor.

--
Dmitry


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists