[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <453FD6B5.9080205@wildbrain.com>
Date: Wed, 25 Oct 2006 14:27:17 -0700
From: Gregory Brauer <greg@...dbrain.com>
To: linux-kernel@...r.kernel.org
Subject: SATA300 TX4 + WD2500KS = status=0x50 { DriveReady SeekComplete }
I have a new Promise SATA300 TX4 4-port SATA controller
to which I have attached two older WD2500JD hard drives
and two brand new WD2500KS hard drives. The older drives
seem to work fine, but both of the brand new hard drives
trigger the following errors every few seconds during
i/o:
Oct 25 13:57:18 gleep kernel: ata3: no sense translation for status: 0x50
Oct 25 13:57:18 gleep kernel: ata3: translated ATA stat/err 0x50/00 to SCSI
SK/ASC/ASCQ 0xb/00/00
Oct 25 13:57:18 gleep kernel: ata3: status=0x50 { DriveReady SeekComplete }
Oct 25 13:57:26 gleep kernel: ata1: no sense translation for status: 0x50
Oct 25 13:57:26 gleep kernel: ata1: translated ATA stat/err 0x50/00 to SCSI
SK/ASC/ASCQ 0xb/00/00
Oct 25 13:57:26 gleep kernel: ata1: status=0x50 { DriveReady SeekComplete }
Oct 25 13:57:27 gleep kernel: ata1: no sense translation for status: 0x50
Oct 25 13:57:27 gleep kernel: ata1: translated ATA stat/err 0x50/00 to SCSI
SK/ASC/ASCQ 0xb/00/00
Oct 25 13:57:27 gleep kernel: ata1: status=0x50 { DriveReady SeekComplete }
Oct 25 13:57:31 gleep kernel: ata1: no sense translation for status: 0x50
Oct 25 13:57:31 gleep kernel: ata1: translated ATA stat/err 0x50/00 to SCSI
SK/ASC/ASCQ 0xb/00/00
Oct 25 13:57:31 gleep kernel: ata1: status=0x50 { DriveReady SeekComplete }
Oct 25 13:57:47 gleep kernel: ata3: no sense translation for status: 0x50
Oct 25 13:57:47 gleep kernel: ata3: translated ATA stat/err 0x50/00 to SCSI
SK/ASC/ASCQ 0xb/00/00
Oct 25 13:57:47 gleep kernel: ata3: status=0x50 { DriveReady SeekComplete }
The machine stays running normally, and any processes doing data
I/O do not pause noticeably, but these errors are very annoying.
Is there anything I can do to help troubleshoot this?
(Note that I am aware of the drive id mapping issue with my Promise
controller, and I am *positive* that it is the two new drives that
are the one's that the error messages refer to.)
Thanks.
Greg
System Info
-----------
Fedora Core 5
2.6.18-1.2200.fc5smp
Device Model: WDC WD2500KS-00MJB0
Firmware Version: 02.01C03
# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0b.0 Mass storage controller: Promise Technology, Inc. PDC20718 (SATA 300
TX4) (rev 02)
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
00:0d.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
00:0f.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet
Controller (rev 05)
00:11.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:11.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:11.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:11.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:11.4 FireWire (IEEE 1394): ALi Corporation M5253 P1394 OHCI 1.1 Controller
00:13.0 Mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372/372N (rev 01)
00:13.1 Mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372/372N (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists