lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 30 Oct 2006 22:50:06 +0100 From: "Andreas Paulsson" <andreas.paulsson@...arden.se> To: <linux-kernel@...r.kernel.org> Subject: PROBLEM: raid5 just dies [1.] One line summary of the problem: Raid5 just dies [2.] Full description of the problem/report: During a copy from a ReiserFS system to a raid5 system, it just locks up and prints out a nice error message: kernel BUG at mm/slab.c:595! invalid opcode: 0000 [#1] PREEMPT Modules linked in: tun ipv6 af_packet pcspkr rtc snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd i2c_viapro i2c_core generic shpchp pci_hotplug via_agp agpgart via82cxxx_audio uart401 sound soundcore ac97_codec sata_via libata via_rhine mii aes cryptoloop loop psmouse ide_cd cdrom unix CPU: 0 EIP: 0060:[<c0160201>] Not tainted VLI EFLAGS: 00010246 (2.6.18.1 #4) EIP is at kmem_cache_free+0x71/0x80 eax: 8000082c ebx: c18defc0 ecx: 0000000c edx: c142e4c0 esi: c18def80 edi: e1726a40 ebp: c18d68c0 esp: c1bcdde8 ds: 007b es: 007b ss: 0068 Process md0_raid5 (pid: 897, ti=c1bcc000 task=c1bac580 task.ti=c1bcc000) Stack: 00000001 c10805a0 c18defc0 c18def80 e1726a40 00000000 c0145879 c18d68c0 e1726a40 e7fa4ae0 c18def80 e7fa4a80 c0168c71 e1726a40 c18defc0 e7fa4ae0 00000000 c0168cb8 e7fa4ae0 c18def80 c0168fa9 e7fa4ae0 c0168591 e7fa4ae0 Call Trace: [<c0145879>] mempool_free+0x59/0xd0 [<c0168c71>] bio_free+0x31/0x60 [<c0168cb8>] bio_fs_destructor+0x18/0x20 [<c0168fa9>] bio_put+0x29/0x40 [<c0168591>] end_bio_bh_io_sync+0x41/0x50 [<c0169ef8>] bio_endio+0x58/0x80 [<c03b572d>] dec_pending+0x4d/0x90 [<c03b5817>] clone_endio+0xa7/0xc0 [<c03a049e>] handle_stripe5+0xc2e/0x1750 [<c039cf2b>] release_stripe+0x3b/0x70 [<c03a36f2>] raid5d+0xd2/0x170 [<c03b04a1>] md_thread+0x61/0x130 [<c0132130>] autoremove_wake_function+0x0/0x60 [<c0132130>] autoremove_wake_function+0x0/0x60 [<c03b0440>] md_thread+0x0/0x130 [<c0131c32>] kthread+0xb2/0xc0 [<c0131b80>] kthread+0x0/0xc0 [<c01013e5>] kernel_thread_helper+0x5/0x10 Code: 89 7c 83 10 40 89 03 56 9d 83 c4 08 5b 5e 5f 5d c3 89 5c 24 04 89 2c 24 e8 bd fc ff ff 8b 03 eb df 0f 0b 6a 0d ca 89 47 c0 eb c2 <0f> 0b 53 02 ca 89 47 c0 eb b3 8b 52 0c eb a8 83 ec 18 89 6c 24 EIP: [<c0160201>] kmem_cache_free+0x71/0x80 SS:ESP 0068:c1bcdde8 [3.] Keywords (i.e., modules, networking, kernel): raid5, aes-loop, kernel [4.] Kernel version (from /proc/version): 2.6.18.1 [5.] Most recent kernel version which did not have the bug: Uncertain, have only tried with this version [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) See above. [7.] A small shell script or example program which triggers the problem (if possible) cp -avr --target-dir=/mnt/lvm/backup /mnt/disk1 /mnt/disk2 /mnt/disk3 /mnt/disk4 [8.] Environment [8.1.] Software (add the output of the ver_linux script here) Linux knackebrod 2.6.18.1 #4 PREEMPT Mon Oct 30 19:07:21 CET 2006 i686 GNU/Linux Gnu C 3.3.5 Gnu make 3.80 binutils 2.15 util-linux 2.12p mount 2.12p module-init-tools 3.2-pre1 e2fsprogs 1.37 reiserfsprogs 3.6.19 PPP 2.4.3 nfs-utils 1.0.6 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.2.1 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.2.1 udev 056 Modules Loaded tun ipv6 af_packet pcspkr rtc snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd i2c_viapro i2c_core generic shpchp pci_hotplug via_agp agpgart via82cxxx_audio uart401 sound soundcore ac97_codec sata_via libata via_rhine mii aes cryptoloop loop psmouse ide_cd cdrom unix [8.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Sempron(tm) 3000+ stepping : 0 cpu MHz : 1999.918 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow ts bogomips : 4004.12 [8.3.] Module information (from /proc/modules): tun 11776 1 - Live 0xf8ea0000 ipv6 272352 16 - Live 0xf8f56000 af_packet 23176 2 - Live 0xf8eff000 pcspkr 3456 0 - Live 0xf8e53000 rtc 14644 0 - Live 0xf8efa000 snd_via82xx 30488 0 - Live 0xf8ef1000 gameport 17160 1 snd_via82xx, Live 0xf8eeb000 snd_ac97_codec 97568 1 snd_via82xx, Live 0xf8ebb000 snd_ac97_bus 2560 1 snd_ac97_codec, Live 0xf8e04000 snd_pcm 85896 2 snd_via82xx,snd_ac97_codec, Live 0xf8ed5000 snd_timer 26372 1 snd_pcm, Live 0xf8eb3000 snd_page_alloc 11016 2 snd_via82xx,snd_pcm, Live 0xf8e79000 snd_mpu401_uart 9472 1 snd_via82xx, Live 0xf8e75000 snd_rawmidi 27040 1 snd_mpu401_uart, Live 0xf8e92000 snd_seq_device 8844 1 snd_rawmidi, Live 0xf8e71000 snd 56292 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi ,snd_seq_device, Live 0xf8ea4000 i2c_viapro 9236 0 - Live 0xf8e13000 i2c_core 23568 1 i2c_viapro, Live 0xf8e8b000 generic 5508 0 [permanent], Live 0xf8e10000 shpchp 41628 0 - Live 0xf8e7f000 pci_hotplug 36536 1 shpchp, Live 0xf8e49000 via_agp 10496 1 - Live 0xf8dfd000 agpgart 36912 1 via_agp, Live 0xf8e55000 via82cxxx_audio 30344 0 - Live 0xf8e07000 uart401 12484 1 via82cxxx_audio, Live 0xf8dea000 sound 84908 2 via82cxxx_audio,uart401, Live 0xf8e33000 soundcore 11104 3 snd,via82cxxx_audio,sound, Live 0xf8de6000 ac97_codec 20108 1 via82cxxx_audio, Live 0xf8df7000 sata_via 11268 0 - Live 0xf8db4000 libata 109588 1 sata_via, Live 0xf8e17000 via_rhine 26248 0 - Live 0xf8def000 mii 6272 1 via_rhine, Live 0xf8db1000 aes 31808 2 - Live 0xf8ddd000 cryptoloop 4096 2 - Live 0xf8d64000 loop 18824 5 cryptoloop, Live 0xf8dab000 psmouse 42760 0 - Live 0xf8dd1000 ide_cd 44932 0 - Live 0xf8dc5000 cdrom 44064 1 ide_cd, Live 0xf8db9000 unix 30000 30 - Live 0xf8d6b000 [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) 00000000-0009c7ff : System RAM 0009c800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cbfff : Video ROM 000d4000-000d67ff : Adapter ROM 000d7000-000db1ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-3ffeffff : System RAM 00100000-00440d0c : Kernel code 00440d0d-00539c73 : Kernel data 3fff0000-3fff2fff : ACPI Non-volatile Storage 3fff3000-3fffffff : ACPI Tables 50000000-5001ffff : 0000:00:0a.0 50020000-50023fff : 0000:00:09.0 d0000000-dfffffff : PCI Bus #01 d0000000-d7ffffff : 0000:01:00.0 d8000000-dfffffff : 0000:01:00.1 e0000000-e3ffffff : 0000:00:00.0 e4000000-e5ffffff : PCI Bus #01 e4000000-e401ffff : 0000:01:00.0 e5000000-e500ffff : 0000:01:00.0 e5010000-e501ffff : 0000:01:00.1 e7000000-e7003fff : 0000:00:09.0 e7004000-e70040ff : 0000:00:10.4 e7004000-e70040ff : ehci_hcd e7005000-e70050ff : 0000:00:12.0 e7005000-e70050ff : via-rhine fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0cf8-0cff : PCI conf1 1000-10ff : 0000:00:11.5 1000-10ff : via82cxxx_audio 4000-407f : motherboard 4000-4003 : ACPI PM1a_EVT_BLK 4004-4005 : ACPI PM1a_CNT_BLK 4008-400b : ACPI PM_TMR 4020-4023 : ACPI GPE0_BLK 5000-500f : motherboard 5000-500f : pnp 00:02 5000-5007 : vt596_smbus 7000-7fff : PCI Bus #01 7000-70ff : 0000:01:00.0 8000-8007 : 0000:00:09.0 8000-8007 : ide2 8400-8403 : 0000:00:09.0 8402-8402 : ide2 8800-8807 : 0000:00:09.0 8800-8807 : ide3 8c00-8c03 : 0000:00:09.0 8c02-8c02 : ide3 9000-900f : 0000:00:09.0 9000-9007 : ide2 9008-900f : ide3 9400-9407 : 0000:00:0a.0 9400-9407 : ide4 9800-9803 : 0000:00:0a.0 9802-9802 : ide4 9c00-9c07 : 0000:00:0a.0 9c00-9c07 : ide5 a000-a003 : 0000:00:0a.0 a002-a002 : ide5 a400-a4ff : 0000:00:0a.0 a400-a407 : ide4 a408-a40f : ide5 a800-a807 : 0000:00:0a.1 a800-a807 : ide6 ac00-ac03 : 0000:00:0a.1 ac02-ac02 : ide6 b000-b007 : 0000:00:0a.1 b000-b007 : ide7 b400-b403 : 0000:00:0a.1 b402-b402 : ide7 b800-b8ff : 0000:00:0a.1 b800-b807 : ide6 b808-b80f : ide7 bc00-bc07 : 0000:00:0f.0 bc00-bc07 : sata_via c000-c003 : 0000:00:0f.0 c000-c003 : sata_via c400-c407 : 0000:00:0f.0 c400-c407 : sata_via c800-c803 : 0000:00:0f.0 c800-c803 : sata_via cc00-cc0f : 0000:00:0f.0 cc00-cc0f : sata_via d000-d0ff : 0000:00:0f.0 d000-d0ff : sata_via d400-d40f : 0000:00:0f.1 d400-d407 : ide0 d408-d40f : ide1 d800-d81f : 0000:00:10.0 d800-d81f : uhci_hcd dc00-dc1f : 0000:00:10.1 dc00-dc1f : uhci_hcd e000-e01f : 0000:00:10.2 e000-e01f : uhci_hcd e400-e41f : 0000:00:10.3 e400-e41f : uhci_hcd e800-e8ff : 0000:00:11.6 ec00-ecff : 0000:00:12.0 ec00-ecff : via-rhine [8.5.] PCI information ('lspci -vvv' as root) 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset Host Bridge Subsystem: Asustek Computer, Inc.: Unknown device 8118 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [80] AGP version 3.5 Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: e4000000-e5ffffff Prefetchable memory behind bridge: d0000000-dfffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:09.0 Unknown mass storage controller: Promise Technology, Inc. PDC20268 (Ultra100 TX2) (rev 02) (prog-if 85) Subsystem: Promise Technology, Inc. Ultra100TX2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 169 Region 0: I/O ports at 8000 [size=8] Region 1: I/O ports at 8400 [size=4] Region 2: I/O ports at 8800 [size=8] Region 3: I/O ports at 8c00 [size=4] Region 4: I/O ports at 9000 [size=16] Region 5: Memory at e7000000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at 50020000 [disabled] [size=16K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:0a.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) Subsystem: Triones Technologies, Inc.: Unknown device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 120 (2000ns min, 2000ns max) Interrupt: pin A routed to IRQ 177 Region 0: I/O ports at 9400 [size=8] Region 1: I/O ports at 9800 [size=4] Region 2: I/O ports at 9c00 [size=8] Region 3: I/O ports at a000 [size=4] Region 4: I/O ports at a400 [size=256] Expansion ROM at 50000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:0a.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) Subsystem: Triones Technologies, Inc.: Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 120 (2000ns min, 2000ns max) Interrupt: pin A routed to IRQ 177 Region 0: I/O ports at a800 [size=8] Region 1: I/O ports at ac00 [size=4] Region 2: I/O ports at b000 [size=8] Region 3: I/O ports at b400 [size=4] Region 4: I/O ports at b800 [size=256] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Asustek Computer, Inc. A7V600 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin B routed to IRQ 185 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at c000 [size=4] Region 2: I/O ports at c400 [size=8] Region 3: I/O ports at c800 [size=4] Region 4: I/O ports at cc00 [size=16] Region 5: I/O ports at d000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc. A7V600 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 185 Region 4: I/O ports at d400 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc. A7V600 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 193 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc. A7V600 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 193 Region 4: I/O ports at dc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc. A7V600 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 193 Region 4: I/O ports at e000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc. A7V600 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 193 Region 4: I/O ports at e400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI]) Subsystem: Asustek Computer, Inc. A7V600 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 0x10 (64 bytes) Interrupt: pin C routed to IRQ 193 Region 0: Memory at e7004000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South] Subsystem: Asustek Computer, Inc. A7V600 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 209 Region 0: I/O ports at 1000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 0 Region 0: I/O ports at e800 [disabled] [size=256] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) Subsystem: Asustek Computer, Inc.: Unknown device 80ff Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 201 Region 0: I/O ports at ec00 [size=256] Region 1: Memory at e7005000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01) (prog-if 00 [VGA]) Subsystem: Giga-byte Technology: Unknown device 4028 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 5 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 7000 [size=256] Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at e4000000 [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01) Subsystem: Giga-byte Technology: Unknown device 4029 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at d8000000 (32-bit, prefetchable) [disabled] [size=128M] Region 1: Memory at e5010000 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- [8.6.] SCSI information (from /proc/scsi/scsi) Attached devices: [8.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): md0 : active raid5 hdd1[1] hdc1[0] hdh1[4] hdg1[3] hde1[2] 1250274304 blocks level 5, 64k chunk, algorithm 2 [5/5] [UUUUU] All are 300gb drives and partitions are Linux Raid Autodetect. Md0 is a physical volume for a volume group /dev/vg0/lv0, which is then aes-encrypted with losetup as /dev/loop1. [X.] Other notes, patches, fixes, workarounds: None. Regards, Andreas Paulsson - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists