linux-kernel - Re: Ordering between PCI config space writes and MMIO reads?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20061031205004.GB6866@mellanox.co.il>
Date:	Tue, 31 Oct 2006 22:50:04 +0200
From:	"Michael S. Tsirkin" <mst@...lanox.co.il>
To:	"Richard B. Johnson" <jmodem@...minablefirebug.com>
Cc:	Roland Dreier <rdreier@...co.com>, linux-kernel@...r.kernel.org,
	linux-ia64@...r.kernel.org, jeff@...zik.org, matthew@....cx,
	openib-general@...nib.org, linux-pci@...ey.karlin.mff.cuni.cz,
	David Miller <davem@...emloft.net>
Subject: Re: Ordering between PCI config space writes and MMIO reads?

Quoting r. Richard B. Johnson <jmodem@...minablefirebug.com>:
> Subject: Re: Ordering between PCI config space writes and MMIO reads?
> 
> 
> ----- Original Message ----- 
> From: "Michael S. Tsirkin" <mst@...lanox.co.il>
> To: "Roland Dreier" <rdreier@...co.com>
> Cc: <linux-kernel@...r.kernel.org>; <linux-ia64@...r.kernel.org>; 
> <jeff@...zik.org>; <matthew@....cx>; <openib-general@...nib.org>; 
> <linux-pci@...ey.karlin.mff.cuni.cz>; "David Miller" <davem@...emloft.net>
> Sent: Tuesday, October 31, 2006 2:53 PM
> Subject: Re: Ordering between PCI config space writes and MMIO reads?
> 
> 
> > Quoting r. Roland Dreier <rdreier@...co.com>:
> >> Subject: Re: Ordering between PCI config space writes and MMIO reads?
> >>
> >> The discussion fizzled out without really reaching a definitive
> >> answer, so I'm going to apply the original patch (below), since I
> >> pretty much convinced myself that only the driver doing the config
> >> access has enough information to fix this reliably.
> >>
> >>  - R.
> >>
> >> Author: John Partridge <johnip@....com>
> >> Date:   Tue Oct 31 11:00:04 2006 -0800
> >>
> >>     IB/mthca: Make sure all PCI config writes reach device before doing 
> >> MMIO
> >>
> >>     During initialization, mthca writes some PCI config space registers
> >>     and then does an MMIO read from one of the BARs it just enabled. 
> >> This
> >>     MMIO read sometimes failed and caused a crash on SGI Altix machines,
> >>     because the PCI-X host bridge (legitimately, according to the PCI
> >>     spec) allowed the MMIO read to start before the config write 
> >> completed.
> >>
> >>     To fix this, add a config read after all config writes to make sure
> >>     they are all done before starting the MMIO read.
> >>
> >>     Signed-off-by: John Partridge <johnip@....com>
> >>     Signed-off-by: Roland Dreier <rolandd@...co.com>
> >>
> >> diff --git a/drivers/infiniband/hw/mthca/mthca_reset.c 
> >> b/drivers/infiniband/hw/mthca/mthca_reset.c
> >> index 91934f2..578dc7c 100644
> >> --- a/drivers/infiniband/hw/mthca/mthca_reset.c
> >> +++ b/drivers/infiniband/hw/mthca/mthca_reset.c
> >> @@ -281,6 +281,20 @@ good:
> >>  goto out;
> >>  }
> >>
> >> + /*
> >> + * Perform a "flush" of the PCI config writes here by reading
> >> + * the PCI_COMMAND register.  This is needed to make sure that
> >> + * we don't try to touch other PCI BARs before the config
> >> + * writes are done -- otherwise an MMIO cycle could start
> >> + * before the config writes are done and reach the HCA before
> >> + * the BAR is actually enabled.
> >> + */
> >> + if (pci_read_config_dword(mdev->pdev, PCI_COMMAND, hca_header)) {
> >> + err = -ENODEV;
> >> + mthca_err(mdev, "Couldn't access HCA memory after restoring, "
> >> +   "aborting.\n");
> >> + }
> >> +
> >>  out:
> >>  if (bridge)
> >>  pci_dev_put(bridge);
> >
> > Here's what I don't understand: according to PCI rules, pci config read
> > can bypass pci config write (both are non-posted).
> > So why does doing it help flush the writes as the comment claims?
> >
> > Isn't this more the case of
> > /* pci_config_write seems to complete asynchronously on Altix systems.
> > * This is probably broken but its not clear what's the best
> > * thing to do is - for now, do pci_read_config_dword which seems to flush
> > * everything out. */
> >
> 
> If you write to the PCI bus and then you read the result, the read __might__
> be the read that flushes any posted writes rather than the read of device
> registers that would occur after the BARs were configured (hardware may be
> slower than the CPU). So, it's best to do the required configuration cycles
> first, then after all is done, read  something before you actually need to use
> data from subsequent read/write cycles.

But why should it help? Accordig to the spec, read does not flush configuration
writes (unlike regular writes).

-- 
MST
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/