linux-kernel - Re: fc6 kernel 2.6.18-1.2798 breaks acpi on HP laptop n5430

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4549450F.3080207@seclark.us>
Date:	Wed, 01 Nov 2006 20:08:31 -0500
From:	Stephen Clark <Stephen.Clark@...lark.us>
To:	Dave Jones <davej@...hat.com>
CC:	Alexey Dobriyan <adobriyan@...il.com>,
	linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: fc6 kernel 2.6.18-1.2798 breaks acpi on HP laptop n5430

Dave Jones wrote:

>On Wed, Nov 01, 2006 at 04:17:50PM -0500, Stephen Clark wrote:
>
> > BIOS-provided physical RAM map:
> >  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> >  BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
> >  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> >  BIOS-e820: 000000001fff0000 - 000000001ffff000 (ACPI data)
> >  BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
> >  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> > 0MB HIGHMEM available.
> > 511MB LOWMEM available.
> > Using x86 segment limits to approximate NX protection
> > DMI 2.2 present.
> > Using APIC driver default
> > ACPI: PM-Timer IO Port: 0x8008
> > Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
> > Detected 850.075 MHz processor.
> > Built 1 zonelists.  Total pages: 131056
> > Kernel command line: ro root=/dev/VolGroup00/LogVol00 lapic nousb 
> > console=ttyS0,38400
> > Local APIC disabled by BIOS -- reenabling.
> > Found and enabled local APIC!
>
>Does it make a difference if you boot with nolapic ?
>
>	Dave
>
>  
>
Hi Dave,

booting without lapic allowed it to boot but now I get
...
Local APIC disabled by BIOS -- you can enable it with "lapic"
...
Local APIC not detected. Using dummy APIC emulation.
  which means more processor overhead - right?

also cpuspeed doesn't work anymore - I don't have a cpufreq dir

I don't get the following messages with kernel 2798
 powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
Nov  1 19:33:34 joker4 kernel: powernow: SGTC: 10000
Nov  1 19:33:34 joker4 kernel: powernow: Minimum speed 300 MHz. Maximum 
speed 850 M
Hz.
Nov  1 19:33:34 joker4 kernel: powernow-k8: Processor cpuid 670 not 
supported

Steve



-- 

"They that give up essential liberty to obtain temporary safety, 
deserve neither liberty nor safety."  (Ben Franklin)

"The course of history shows that as a government grows, liberty 
decreases."  (Thomas Jefferson)



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/