| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 3 Nov 2006 13:54:20 -0500 (EST)
From: luugi.marsan@....com (Luugi Marsan)
To: linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] Add Legacy IDE mode support for SB600 SATA
From: conke.hu@....com
ATI SB600 SATA controller supports 4 modes: Legacy IDE, Native IDE, AHCI and RAID.IDE modes are used for compatibility with some old OS without AHCI driver,but now they are not necessary for Linux since the kernel has supported AHCI.Some BIOS set Legacy IDE as SB600 SATA's default mode, but the AHCI driver cannot run in Legacy IDE.So, we should set the controller back to AHCI mode if it has been set as IDE by BIOS.
Signed-off-by: Luugi Marsan <luugi.marsan@....com>
--- linux-2.6.19-rc4-git5/drivers/pci/quirks.c.orig 2006-11-04 03:50:25.000000000 +0800
+++ linux-2.6.19-rc4-git5/drivers/pci/quirks.c 2006-11-04 03:53:56.000000000 +0800
@@ -796,6 +796,35 @@ static void __init quirk_mediagx_master(
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
+
+/*
+ * ATI SB600 SATA controller supports 4 modes: Legacy IDE, Native IDE, AHCI
+ * and RAID.
+ * IDE modes are used for compatibility with some old OS without AHCI driver,
+ * but now they are not necessary for Linux since the kernel has supported
+ * AHCI.
+ * Some BIOS set Legacy IDE as SB600 SATA's default mode, but the AHCI driver
+ * cannot run in Legacy IDE.
+ * So, we should set the controller back to AHCI mode if it has been set as IDE
+ * by BIOS.
+ */
+static void __devinit quirk_sb600_sata(struct pci_dev *pdev)
+{
+ if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+ {
+ u8 tmp;
+
+ pci_read_config_byte(pdev, 0x40, &tmp);
+ pci_write_config_byte(pdev, 0x40, tmp|1);
+ pci_write_config_byte(pdev, 0x9, 1);
+ pci_write_config_byte(pdev, 0xa, 6);
+ pci_write_config_byte(pdev, 0x40, tmp);
+
+ pdev->class = 0x010601;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_sb600_sata);
+
/*
* As per PCI spec, ignore base address registers 0-3 of the IDE controllers
* running in Compatible mode (bits 0 and 2 in the ProgIf for primary and
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists