Message-ID: <Pine.LNX.4.64.0611080711480.7830@silvia.corp.fedex.com>
Date:	Wed, 8 Nov 2006 07:13:32 +0800 (SGT)
From:	Jeff Chua <jeff.chua.linux@...il.com>
To:	Aaron Durbin <adurbin@...gle.com>
cc:	Matthew Wilcox <matthew@....cx>,
	Linux Kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] i386: Update MMCONFIG resource insertion to check against
 e820 map.


On 11/8/06, Aaron Durbin <adurbin@...gle.com> wrote:
> Do you mind posting your dmesg from the machine that originally didn't
> work? I would like to take a look it.

Aaron,

Here's the bad one again ...


Linux version 2.6.19-rc4 (root@...iana.corp.fedex.com) (gcc version 3.4.5) #1 SMP PREEMPT Sun Nov 5 17:18:48 SGT 2006
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 00000000df686c00 (usable)
  BIOS-e820: 00000000df686c00 - 00000000df688c00 (ACPI NVS)
  BIOS-e820: 00000000df688c00 - 00000000df68ac00 (ACPI data)
  BIOS-e820: 00000000df68ac00 - 00000000e0000000 (reserved)
  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
2678MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Entering add_active_range(0, 0, 915078) 0 entries of 256 used
Zone PFN ranges:
   DMA             0 ->     4096
   Normal       4096 ->   229376
   HighMem    229376 ->   915078
early_node_map[1] active PFN ranges
     0:        0 ->   915078
On node 0 totalpages: 915078
   DMA zone: 32 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 4064 pages, LIFO batch:0
   Normal zone: 1760 pages used for memmap
   Normal zone: 223520 pages, LIFO batch:31
   HighMem zone: 5357 pages used for memmap
   HighMem zone: 680345 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v002 DELL                                  ) @ 0x000feb00
ACPI: XSDT (v001 DELL    GX620   0x00000007 ASL  0x00000061) @ 0x000fd253
ACPI: FADT (v003 DELL    GX620   0x00000007 ASL  0x00000061) @ 0x000fd34b
ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050309) @ 0xfffd6996
ACPI: MADT (v001 DELL    GX620   0x00000007 ASL  0x00000061) @ 0x000fd43f
ACPI: BOOT (v001 DELL    GX620   0x00000007 ASL  0x00000061) @ 0x000fd4b1
ACPI: ASF! (v016 DELL    GX620   0x00000007 ASL  0x00000061) @ 0x000fd4d9
ACPI: MCFG (v001 DELL    GX620   0x00000007 ASL  0x00000061) @ 0x000fd540
ACPI: HPET (v001 DELL    GX620   0x00000007 ASL  0x00000061) @ 0x000fd57e
ACPI: SSDT (v001 DpgPmm  Cpu0Ist 0x00000011 INTL 0x20050309) @ 0xdf686c40
ACPI: SSDT (v001 DpgPmm  Cpu1Ist 0x00000011 INTL 0x20050309) @ 0xdf687049
ACPI: SSDT (v001 DpgPmm    CpuPm 0x00000010 INTL 0x20050309) @ 0xdf687452
ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050309) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e1000000 (gap: e0000000:10000000)
Detected 2992.724 MHz processor.
Built 1 zonelists.  Total pages: 907929
Kernel command line: BOOT_IMAGE=(hd0,1)/linux/bzc1 root=/dev/sda2 resume=/dev/sda3 testing_only="this is got to be good. Now I can send in a very long line just like 2.4 and need not worry about the line being too long. What a great way to start a great year!!! Cool!"
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3625948k/3660312k available (2402k kernel code, 33292k reserved, 848k data, 200k init, 2742808k highmem)
virtual kernel memory layout:
     fixmap  : 0xfff4f000 - 0xfffff000   ( 704 kB)
     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
       .init : 0xc0433000 - 0xc0465000   ( 200 kB)
       .data : 0xc0358928 - 0xc042cab4   ( 848 kB)
       .text : 0xc0100000 - 0xc0358928   (2402 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Using HPET for base-timer
Calibrating delay using timer specific routine.. 5990.52 BogoMIPS (lpj=11981048)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00000000 00000001
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5985.35 BogoMIPS (lpj=11970701)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00000000 00000001
CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07
Total of 2 processors activated (11975.87 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=327
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 0 of device 0000:00:02.0
PCI: Cannot allocate resource region 3 of device 0000:00:02.0
PCI: Cannot allocate resource region 0 of device 0000:00:02.1
PCI: Cannot allocate resource region 0 of device 0000:00:1d.7
PCI: Cannot allocate resource region 2 of device 0000:00:1e.2
PCI: Cannot allocate resource region 3 of device 0000:00:1e.2
PCI: Cannot allocate resource region 0 of device 0000:02:00.0
NET: Registered protocol family 23
pnp: 00:01: ioport range 0x800-0x85f could not be reserved
pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
pnp: 00:09: ioport range 0x100-0x1fe has been reserved
pnp: 00:09: ioport range 0x200-0x277 has been reserved
pnp: 00:09: ioport range 0x280-0x2e7 has been reserved
pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved
pnp: 00:09: ioport range 0x300-0x377 has been reserved
pnp: 00:09: ioport range 0x380-0x3bb has been reserved
pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved
pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Failed to allocate mem resource #8:100000@...00000 for 0000:00:1c.0
PCI: Failed to allocate mem resource #0:80000@...00000 for 0000:00:02.0
PCI: Failed to allocate mem resource #0:80000@...00000 for 0000:00:02.1
PCI: Failed to allocate mem resource #3:40000@...00000 for 0000:00:02.0
PCI: Failed to allocate mem resource #0:400@...00000 for 0000:00:1d.7
PCI: Failed to allocate mem resource #2:200@...00000 for 0000:00:1e.2
PCI: Failed to allocate mem resource #3:100@...00000 for 0000:00:1e.2
PCI: Bridge: 0000:00:01.0
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
PCI: Failed to allocate mem resource #0:10000@0 for 0000:02:00.0
PCI: Bridge: 0000:00:1c.0
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x7a set to 0x1
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [VBTN]
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x3
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x4
ibm_acpi: ec object not found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945G Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.0.1 20051102
RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 3.6.10)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac6
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18
scsi0 : ata_piix
ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 8
ata1.01: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32)
ata1.01: ata1: dev 1 multi count 8
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
scsi1 : ata_piix
ata2: port is slow to respond, please be patient (Status 0xff)
ata2: port failed to respond (30 secs, Status 0xff)
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: reset failed, giving up
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
sd 0:0:0:0: Attached scsi disk sda
scsi 0:0:1:0: Direct-Access     ATA      WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
  sdb:
sd 0:0:1:0: Attached scsi disk sdb
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -16
ehci_hcd: probe of 0000:00:1d.7 failed with error -16
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ff60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000ff20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Dell Dell USB Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1
input: USB Optical Mouse as /class/input/input1
input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@...hat.com
EDAC MC: Ver: 2.0.1 Nov  5 2006
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Time: tsc clocksource has been installed.
ACPI: (supports S0 S1 S3 S4 S5)
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 200k freed
Adding 7823644k swap on /dev/sda3.  Priority:-1 extents:1 across:7823644k
tg3.c:v3.67 (October 18, 2006)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
tg3: Cannot find proper PCI device base address, aborting.
ACPI: PCI interrupt for device 0000:02:00.0 disabled
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack




Thanks,
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists