| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4552504A.8000906@gmail.com> Date: Wed, 08 Nov 2006 22:46:50 +0100 From: Jiri Slaby <jirislaby@...il.com> To: Jano <jano@...mo3-3.acn.waw.pl> CC: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org Subject: Re: Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1) Please, do not remove Cc people. Jano wrote: > On 6 Lis, 19:00, Jiri Slaby <jirisl...@...il.com> wrote: >> Jano wrote: >> > Hi everyone, >> >> > Recently I've downloaded and compiled kernel 2.6.18.1. After installing >> > modules and kernel and updating Grub I rebooted my box and tried to >> > launch new kernel. Everything was launching nicely, but while loading >> > GDM the screen went black and I was unable to switch console (using >> > ctrl+alt+Fn). I've rebooted using single user mode and logged in as >> > root. What I've discovered is the fact that I cannot mount any >> > filesystem from /dev/hdb. All filesystems from /dev/hda work as they >> > ought to, but when I try to mount something from the second hard disk I >> > get: >> >> > # mount -t ext3 /dev/hdb1 /home >> > /dev/hdb1 already mounted or /home is busy >> > # umount /home >> > /home not mounted >> >> > Here you've got my /etc/fstab: >> >> > proc /proc proc defaults 0 0 >> > /dev/hda3 / ext3 defaults,errors=remount-ro 0 >> > 1 >> > /dev/hda1 /boot ext3 defaults 0 2 >> > /dev/hdb1 /home ext3 defaults 0 2 >> > /dev/hda5 /usr ext3 defaults 0 2 >> > /dev/hda7 none swap sw 0 0 >> > /dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 >> > /dev/sda1 /media/usbdisk vfat user,auto 0 0 >> >> > Currently I am using kernel 2.6.15 from Ubuntu repositories. All >> > filesystems work perfectly. Have you got any ideas what might be going >> > on?dmesg >2.6.15 >> reboot >> dmesg >2.6.18 >> diff -u 2.6.15 2.6.18 >post_this_to_lkml >> might help us. Also attach /proc/mounts. >> >> regards, > > Thank you for your feedback. Here you've got my /proc/mount on 2.6.18.1 > > rootfs / rootfs rw 0 0 > /dev/root / ext3 rw,data=ordered 0 0 > proc /proc proc rw 0 0 > sysfs /sys sysfs rw 0 0 > tmpfs /var/run tmpfs rw 0 0 > tmpfs /var/lock tmpfs rw 0 0 > /dev/root /dev/.static/dev ext3 rw,data=ordered 0 0 > udev /dev tmpfs rw 0 0 > devpts /dev/pts devpts rw 0 0 > tmpfs /dev/shm tmpfs rw 0 0 > tmpfs /var/run tmpfs rw 0 0 > tmpfs /var/lock tmpfs rw 0 0 > /dev/hda1 /boot ext3 rw,data=ordered 0 0 > /dev/hda5 /usr ext3 rw,data=ordered 0 0 > > And dmesg diff, exactly as you suggested: Yup, but you use timestamps on the one of kernels, nevermind -- it's sed job. > --- 2.6.15 2006-11-08 18:06:16.000000000 +0100 > +++ 2.6.18.1 2006-11-08 22:07:53.000000000 +0100 > @@ -1,317 +1,254 @@ > -[17179569.184000] Linux version 2.6.15-27-386 (buildd@...ranova) (gcc > version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 > UTC 2006 > -[17179569.184000] BIOS-provided physical RAM map: > -[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > -[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 > (reserved) > -[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 [...] > +EXT3-fs: mounted filesystem with ordered data mode. > +kjournald starting. Commit interval 5 seconds > +EXT3 FS on hda5, internal journal > +EXT3-fs: mounted filesystem with ordered data mode. > > I hope it will be helpful. Ok, we have this: @@ -1,6 +1,5 @@ -Linux version 2.6.15-27-386 (buildd@...ranova) (gcc -ersion 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 -TC 2006 +Linux version 2.6.18.1 (root@...o-desktop) (gcc version 4.0.3 (Ubuntu +.0.3-1ubuntu5)) #1 Mon Nov 6 16:14:01 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) @@ -11,26 +10,19 @@ BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) -127MB HIGHMEM available. +Warning only 896MB will be used. +Use a HIGHMEM enabled kernel. This has nothing to do with your problem, but I recommend you to enable HIGHMEM. 896MB LOWMEM available. -On node 0 totalpages: 262140 +On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:0 - DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 - HighMem zone: 32764 pages, LIFO batch:7 DMI 2.3 present. -ACPI: RSDP (v000 ASUS - ) @ 0x000f5e20 -ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT -x31313031) @ 0x3fffc000 -ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT -x31313031) @ 0x3fffc0b2 -ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT -x31313031) @ 0x3fffc030 -ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT -x31313031) @ 0x3fffc058 -ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT -x0100000b) @ 0x00000000 +ACPI: RSDP (v000 ASUS ) @ 0x000f5e20 +ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc000 +ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc0b2 +ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc030 +ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc058 +ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) @@ -45,67 +37,54 @@ ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information -Allocating PCI resources starting at 50000000 (gap: -0000000:bec00000) -Built 1 zonelists -Kernel command line: root=/dev/hda3 ro quiet splash +Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) +Detected 1839.975 MHz processor. +Built 1 zonelists. Total pages: 229376 +Kernel command line: root=/dev/hda3 ro single mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) +Enabling fast FPU save and restore... done. +Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 -PID hash table entries: 4096 (order: 12, 65536 bytes) -Detected 1840.206 MHz processor. -Using pmtmr for high-res timesource +PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 -Dentry cache hash table entries: 131072 (order: 7, -24288 bytes) -Inode-cache hash table entries: 65536 (order: 6, -62144 bytes) -Memory: 1028872k/1048560k available (1976k kernel -ode, 18936k reserved, 606k data, 288k init, 131056k highmem) -Checking if this processor honours the WP bit even -n supervisor mode... Ok. -Calibrating delay using timer specific routine.. -683.37 BogoMIPS (lpj=7366740) -Security Framework v1.0.0 initialized -SELinux: Disabled at boot. +Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) +Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) +Memory: 906300k/917504k available (1813k kernel code, 10728k +eserved, 571k data, 172k init, 0k highmem) +Checking if this processor honours the WP bit even in supervisor mode... Ok. +Calibrating delay using timer specific routine.. 3682.73 BogoMIPS (lpj=7365468) Mount-cache hash table entries: 512 -CPU: After generic identify, caps: 0383fbff -1c3fbff 00000000 00000000 00000000 00000000 00000000 -CPU: After vendor identify, caps: 0383fbff c1c3fbff -0000000 00000000 00000000 00000000 00000000 -CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K -64 bytes/line) +CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 +0000000 00000000 00000000 00000000 +CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 +0000000 00000000 00000000 +CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) -CPU: After all inits, caps: 0383fbff c1c3fbff -0000000 00000420 00000000 00000000 00000000 -mtrr: v2.0 (20020519) +CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 +0000000 00000000 00000000 +Intel machine check architecture supported. +Intel machine check reporting enabled on CPU#0. +Compat vDSO mapped to ffffe000. CPU: AMD Athlon(TM) XP 3000+ stepping 00 -Enabling fast FPU save and restore... done. -Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. -checking if image is initramfs... it is -Freeing initrd memory: 6616k freed -ACPI: Looking for DSDT ... not found! +ACPI: Core revision 20060707 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 -EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1 PCI: Using configuration type 1 -ACPI: Subsystem revision 20051216 +Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) -ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 -0 11 12) *0, disabled. +ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12) -ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 -0 11 12) *0, disabled. +ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12) -ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 -11 12 14 15) +ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 @@ -114,267 +93,168 @@ Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] -Linux Plug and Play Support v0.97 (c) Adam Belay -pnp: PnP ACPI init -pnp: PnP ACPI: found 14 devices -PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing -PCI: If a device doesn't work, try "pci=routeirq". -f it helps, post a report -pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved -pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved -pnp: 00:0d: ioport range 0x290-0x297 has been reserved -pnp: 00:0d: ioport range 0x370-0x375 has been reserved +PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: bf000000-bfffffff PREFETCH window: c0000000-f7ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 +NET: Registered protocol family 2 +IP route cache hash table entries: 32768 (order: 5, 131072 bytes) +TCP established hash table entries: 131072 (order: 7, 524288 bytes) +TCP bind hash table entries: 65536 (order: 6, 262144 bytes) +TCP: Hash tables configured (established 131072 bind 65536) +TCP reno registered Simple Boot Flag at 0x3a set to 0x1 -audit: initializing netlink socket (disabled) -audit(1163006904.972:1): initialized -highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered -io scheduler anticipatory registered +io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered -isapnp: Scanning for PnP cards... -isapnp: No Plug & Play device found -PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at -x60,0x64 irq 1,12 -serio: i8042 AUX port at 0x60,0x64 irq 12 -serio: i8042 KBD port at 0x60,0x64 irq 1 -Serial: 8250/16550 driver $Revision: 1.90 $ 48 -orts, IRQ sharing enabled -serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A -00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A -ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 -level, low) -> IRQ 169 -ACPI: PCI interrupt for device 0000:00:0d.0 disabled -RAMDISK driver initialized: 16 RAM disks of 65536K -ize 1024 blocksize +ACPI: Power Button (FF) [PWRF] +ACPI: Power Button (CM) [PWRB] +Floppy drive(s): fd0 is 1.44M +FDC 0 is a post-1991 82077 +via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker +ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 16 +eth0: VIA Rhine II at 0xbd800000, 00:0e:a6:8a:a6:36, IRQ 16. +eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 -ide: Assuming 33MHz system bus speed for PIO modes; -verride with idebus=xx -mice: PS/2 mouse device common for all mice -EISA: Probing bus 0 at eisa.0 -EISA: Detected 0 cards. -NET: Registered protocol family 2 -input: AT Translated Set 2 keyboard as /class/input/input0 -IP route cache hash table entries: 65536 (order: 6, -62144 bytes) -TCP established hash table entries: 262144 (order: -, 1048576 bytes) -TCP bind hash table entries: 65536 (order: 6, 262144 bytes) -TCP: Hash tables configured (established 262144 bind 65536) -TCP reno registered -TCP bic registered -NET: Registered protocol family 1 -NET: Registered protocol family 8 -NET: Registered protocol family 20 -Using IPI Shortcut mode -ACPI wakeup devices: -PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN -ACPI: (supports S0 S1 S4 S5) -Freeing unused kernel memory: 288k freed -vga16fb: initializing -vga16fb: mapped to 0xc00a0000 -Console: switching to colour frame buffer device 80x25 -fb0: VGA16 VGA frame buffer device -Capability LSM initialized -VP_IDE: IDE controller at PCI slot 0000:00:11.1 -ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI -PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15 -VP_IDE: chipset revision 6 -VP_IDE: not 100% native mode: will probe irqs later -VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller -n pci0000:00:11.1 - ide0: BM-DMA at 0xa800-0xa807, BIOS settings: -da:DMA, hdb:DMA - ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: -dc:DMA, hdd:DMA +ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: MAXTOR 6L040J2, ATA DISK drive hdb: SAMSUNG SP0802N, ATA DISK drive -ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive hdd: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive +ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB -hda: 78177792 sectors (40027 MB) w/1819KiB Cache, -HS=65535/16/63, UDMA(33) +hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > -hdb: max request size: 1024KiB -hdb: 156368016 sectors (80060 MB) w/2048KiB Cache, -HS=16383/255/63, UDMA(33) +hdb: max request size: 512KiB +hdb: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63 hdb: cache flushes supported hdb: hdb1 hdb2 < hdb5 hdb6 > -hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) -Uniform CD-ROM driver Revision: 3.20 -hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) -usbcore: registered new driver usbfs -usbcore: registered new driver hub -USB Universal Host Controller Interface driver v2.3 -ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 -level, low) -> IRQ 177 -PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 1 -uhci_hcd 0000:00:10.0: UHCI Host Controller -uhci_hcd 0000:00:10.0: new USB bus registered, -ssigned bus number 1 -uhci_hcd 0000:00:10.0: irq 177, io base 0x0000b800 -hub 1-0:1.0: USB hub found -hub 1-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 -level, low) -> IRQ 177 -PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 1 -uhci_hcd 0000:00:10.1: UHCI Host Controller -uhci_hcd 0000:00:10.1: new USB bus registered, -ssigned bus number 2 -uhci_hcd 0000:00:10.1: irq 177, io base 0x0000b400 -hub 2-0:1.0: USB hub found -hub 2-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 -level, low) -> IRQ 177 -PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 1 -uhci_hcd 0000:00:10.2: UHCI Host Controller -uhci_hcd 0000:00:10.2: new USB bus registered, -ssigned bus number 3 -uhci_hcd 0000:00:10.2: irq 177, io base 0x0000b000 -hub 3-0:1.0: USB hub found -hub 3-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 -level, low) -> IRQ 177 -PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 1 -ehci_hcd 0000:00:10.3: EHCI Host Controller -ehci_hcd 0000:00:10.3: new USB bus registered, -ssigned bus number 4 -ehci_hcd 0000:00:10.3: irq 177, io mem 0xbe000000 -ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, -river 10 Dec 2004 -hub 4-0:1.0: USB hub found -hub 4-0:1.0: 6 ports detected -usb 1-1: new full speed USB device using uhci_hcd -nd address 2 -Attempting manual resume -EXT3-fs: mounted filesystem with ordered data mode. +serio: i8042 AUX port at 0x60,0x64 irq 12 +serio: i8042 KBD port at 0x60,0x64 irq 1 +mice: PS/2 mouse device common for all mice +IPv4 over IPv4 tunneling driver +TCP bic registered +Using IPI Shortcut mode +ACPI: (supports S0 S1 S4 S5) +Time: tsc clocksource has been installed. +input: AT Translated Set 2 keyboard as /class/input/input0 kjournald starting. Commit interval 5 seconds -usb 4-1: new high speed USB device using ehci_hcd -nd address 2 -usb 2-2: new full speed USB device using uhci_hcd -nd address 2 -usb 2-2: device descriptor read/64, error -71 -usb 2-2: device descriptor read/64, error -71 -usb 2-2: new full speed USB device using uhci_hcd -nd address 3 -usb 2-2: device descriptor read/64, error -71 -usb 2-2: device descriptor read/64, error -71 -usb 2-2: new full speed USB device using uhci_hcd -nd address 4 -usb 2-2: device not accepting address 4, error -71 -usb 2-2: new full speed USB device using uhci_hcd -nd address 5 -usb 2-2: device not accepting address 5, error -71 -pci_hotplug: PCI Hot Plug PCI Core version: 0.5 -shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 +EXT3-fs: mounted filesystem with ordered data mode. +VFS: Mounted root (ext3 filesystem) readonly. +Freeing unused kernel memory: 172k freed +input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1 +NET: Registered protocol family 1 +hdc: ATAPI 52X DVD-ROM drive, 256kB Cache +Uniform CD-ROM driver Revision: 3.20 +eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: AGP aperture is 64M @ 0xf8000000 -irda_init() -NET: Registered protocol family 23 -via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written -y Donald Becker -ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 -level, low) -> IRQ 185 -PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 9 -eth0: VIA Rhine II at 0x1a400, 00:0e:a6:8a:a6:36, IRQ 185. -eth0: MII PHY found at address 1, status 0x786d -dvertising 01e1 Link 45e1. -gameport: EMU10K1 is pci0000:00:13.1/gameport0, io -x9800, speed 1217kHz -ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 -level, low) -> IRQ 193 -Real Time Clock Driver v1.12 -input: PC Speaker as /class/input/input1 -drivers/usb/class/usblp.c: usblp0: USB -idirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 +usbcore: registered new driver usbfs +usbcore: registered new driver hub +ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 17 +PCI: VIA IRQ fixup for 0000:00:10.3, from 0 to 1 +ehci_hcd 0000:00:10.3: EHCI Host Controller +ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 +ehci_hcd 0000:00:10.3: irq 17, io mem 0xbe000000 +ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 +usb usb1: configuration #1 chosen from 1 choice +hub 1-0:1.0: USB hub found +hub 1-0:1.0: 6 ports detected +Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled +serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A +hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache +ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 18 +ACPI: PCI interrupt for device 0000:00:0d.0 disabled +usb 1-1: new high speed USB device using ehci_hcd and address 2 +usb 1-1: configuration #1 chosen from 1 choice +ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 19 +VP_IDE: IDE controller at PCI slot 0000:00:11.1 +ACPI: Unable to derive IRQ for device 0000:00:11.1 +ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI +PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15 +VP_IDE: chipset revision 6 +VP_IDE: not 100% native mode: will probe irqs later +VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 +VP_IDE: port 0x01f0 already claimed by ide0 +VP_IDE: port 0x0170 already claimed by ide1 +VP_IDE: neither IDE port enabled (BIOS) Hmmm, this smells strange. +NET: Registered protocol family 17 +drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if + alt 0 proto 2 vid 0x03F0 pid 0x2B17 usbcore: registered new driver usblp -drivers/usb/class/usblp.c: v0.13: USB Printer -evice Class driver -Floppy drive(s): fd0 is 1.44M -parport: PnPBIOS parport detected. -parport0: PC-style at 0x378 (0x778), irq 7, dma 3 -PCSPP,TRISTATE,COMPAT,ECP,DMA] -FDC 0 is a post-1991 82077 -eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 -input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2 -ts: Compaq touchscreen protocol output -lp0: using parport0 (interrupt-driven). -fuse init (API version 7.3) -fglrx: module license 'Proprietary. (C) 2002 - ATI -echnologies, Starnberg, GERMANY' taints kernel. -[fglrx] Maximum main memory to use for locked dma -uffers: 929 MBytes. -[fglrx] module loaded - fglrx 8.29.6 [Sep 19 2006] on minor 0 -Adding 1028120k swap on /dev/hda7. Priority:-1 -xtents:1 across:1028120k +drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver +parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] +parport0: irq 7 detected +lp0: using parport0 (polling). +fuse init (API version 7.7) +Adding 1028120k swap on /dev/hda7. Priority:-1 extents:1 across:1028120k EXT3 FS on hda3, internal journal md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 -NET: Registered protocol family 17 -device-mapper: 4.4.0-ioctl (2005-01-12) -nitialised: dm-devel@...hat.com -cdrom: open failed. +device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@...hat.com +device-mapper: table: 253:0: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:0: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:0: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:0: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:0: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:0: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table +device-mapper: table: 253:3: linear: dm-linear: Device lookup failed +device-mapper: ioctl: error adding target to table kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds -EXT3 FS on hdb1, internal journal -EXT3-fs: mounted filesystem with ordered data mode. -kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. -ACPI: Power Button (FF) [PWRF] -ACPI: Power Button (CM) [PWRB] -ibm_acpi: ec object not found -pcc_acpi: loading... -ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 -level, low) -> IRQ 169 -ppdev: user-space parallel port driver -apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) -apm: overridden by ACPI. -[fglrx] AGP detected, AgpState = 0x1f000a0b -hardware caps of chipset) -agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. -agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode -agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode -[fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps) -[fglrx] total GART = 67108864 -[fglrx] free GART = 51113984 -[fglrx] max single GART = 51113984 -[fglrx] total LFB = 126873600 -[fglrx] free LFB = 116387840 -[fglrx] max single LFB = 116387840 -[fglrx] total Inv = 134217728 -[fglrx] free Inv = 134217728 -[fglrx] max single Inv = 134217728 -[fglrx] total TIM = 0 -NET: Registered protocol family 10 -lo: Disabled Privacy Extensions -IPv6 over IPv4 tunneling driver -eth0: no IPv6 routers present -ISO 9660 Extensions: Microsoft Joliet Level 3 -ISOFS: changing to secondary root -Bluetooth: Core ver 2.8 -NET: Registered protocol family 31 -Bluetooth: HCI device and connection manager initialized -Bluetooth: HCI socket layer initialized -Bluetooth: L2CAP ver 2.8 -Bluetooth: L2CAP socket layer initialized -Bluetooth: RFCOMM socket layer initialized -Bluetooth: RFCOMM TTY layer initialized -Bluetooth: RFCOMM ver 1.7 Sorry, it's not exact diff, but there were some line wraps. Which ATA do you use (the prod or experimental)? Post a .config. regards, -- http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists