[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4553528E.9060504@trollprod.org>
Date: Thu, 09 Nov 2006 17:08:46 +0100
From: Olivier Nicolas <olivn@...llprod.org>
To: Takashi Iwai <tiwai@...e.de>
CC: Adrian Bunk <bunk@...sta.de>,
Stephen Hemminger <shemminger@...l.org>,
Jaroslav Kysela <perex@...e.cz>, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org, gregkh@...e.de,
linux-pci@...ey.karlin.mff.cuni.cz, len.brown@...el.com,
linux-acpi@...r.kernel.org,
"Eric W. Biederman" <ebiederm@...ssion.com>,
Andrew Morton <akpm@...l.org>,
Linus Torvalds <torvalds@...l.org>
Subject: Re: 2.6.19-rc5 x86_64 irq 22: nobody cared
Takashi,
You are right, setting disable_msi=1 as an option for snd-hda-intel
module solve my problem.
Thanks
Olivier
Takashi Iwai wrote:
> At Thu, 9 Nov 2006 07:49:56 +0100,
> Adrian Bunk wrote:
>> On Wed, Nov 08, 2006 at 01:44:29PM +0100, Olivier Nicolas wrote:
>>
>>> Hi,
>> Hi Olivier,
>>
>>> 2.6.19-rc5 does not boot properly, I have tried pci=routeirq, irpoll
>>> without success.
>>>
>>> Full details (.config, dmesg, /proc/interrupts) are in
>>> http://olivn.trollprod.org/2.6.19-rc5-irq.tar.gz
>> thanks for your report!
>>
>> I might be wrong, but looking at the dmesg:
>> - irq 22 is the hda_intel IRQ
>> - the "irq 22: nobody cared" is immediately before the
>> "hda_intel: No response from codec, disabling MSI..."
>> - in the routeirq case, the hda_intel IRQ as well as the
>> IRQ in the error message change to 21
>>
>> So it might be related to the hda_intel MSI check.
>
> To disable MSI from the beginning, set disable_msi=1 module option for
> snd-hda-intel.
>
>
> Takashi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists