Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:37:32 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003ffffc00 (ACPI data) BIOS-e820: 000000003ffffc00 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6900 Using x86 segment limits to approximate NX protection On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 INTEL ) @ 0x000f6910 ACPI: RSDT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x3fffa25c ACPI: FADT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x3ffffafa ACPI: MADT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x3ffffb6e ACPI: BOOT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x3ffffbd8 ACPI: DSDT (v001 INTEL 024B 0x00000001 MSFT 0x0100000a) @ 0x00000000 ACPI: PM-Timer IO Port: 0x404 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) Processor #3 6:8 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 31 low level) Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Detected 999.840 MHz processor. Built 1 zonelists. Total pages: 262128 Kernel command line: ro root=/dev/vvg0/root clocksource=acpi_pm mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec01000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07ae000 soft=c078e000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032004k/1048512k available (2138k kernel code, 15732k reserved, 868k data, 240k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2000.70 BogoMIPS (lpj=4001400) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel Pentium III (Coppermine) stepping 06 SMP alternatives: switching to SMP code Booting processor 1/0 eip 3000 CPU 1 irqstacks, hard=c07af000 soft=c078f000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1999.65 BogoMIPS (lpj=3999306) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (4000.35 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=424 bytes sizeof(dentry)=148 bytes sizeof(ext3inode)=600 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=172 bytes sizeof(task_struct)=1392 bytes migration_cost=808 checking if image is initramfs... it is Freeing initrd memory: 2275k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb57, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [IR1] (IRQs 5 10) *9 ACPI: PCI Interrupt Link [LN0E] (IRQs *14) ACPI: PCI Interrupt Link [LN10] (IRQs *16) ACPI: PCI Interrupt Link [LN11] (IRQs *17) ACPI: PCI Interrupt Link [LN12] (IRQs *18) ACPI: PCI Interrupt Link [LN13] (IRQs *19) ACPI: PCI Interrupt Link [LN14] (IRQs *20) ACPI: PCI Interrupt Link [LN15] (IRQs *21) ACPI: PCI Interrupt Link [LN16] (IRQs *22) ACPI: PCI Interrupt Link [LN17] (IRQs *23) ACPI: PCI Interrupt Link [LN18] (IRQs *24) ACPI: PCI Interrupt Link [LN19] (IRQs *25) ACPI: PCI Interrupt Link [LN1A] (IRQs *26) ACPI: PCI Interrupt Link [LN1B] (IRQs *27) ACPI: PCI Interrupt Link [LN1C] (IRQs *28) ACPI: PCI Interrupt Link [LN1D] (IRQs *29) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Firmware left 0000:00:03.0 e100 interrupts enabled, disabling ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 4) interrupt mode. ACPI: PCI Root Bridge [PCI1] (0000:01) PCI: Probing PCI hardware (bus 01) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: Power Resource [FN10] (off) ACPI: Power Resource [FN11] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:0b: ioport range 0x400-0x40a could not be reserved pnp: 00:0b: ioport range 0x40c-0x417 could not be reserved pnp: 00:0b: ioport range 0x418-0x418 has been reserved pnp: 00:0c: ioport range 0x580-0x58d has been reserved pnp: 00:0c: ioport range 0x40b-0x40b has been reserved pnp: 00:0c: ioport range 0x419-0x41b has been reserved pnp: 00:0c: ioport range 0x41d-0x41f has been reserved pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0c: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:0c: ioport range 0xc00-0xc01 has been reserved NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x7d set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1163096385.296:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 8BDC589434DBC709 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Transitioning device [FN1] to D3 ACPI: Transitioning device [FN1] to D3 ACPI: Fan [FN1] (off) ACPI: Transitioning device [FN2] to D3 ACPI: Transitioning device [FN2] to D3 ACPI: Fan [FN2] (off) ACPI: Thermal Zone [TZC0] (29 C) ACPI: Thermal Zone [TZC1] (35 C) ACPI: Thermal Zone [TZE0] (25 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.1 failed with error -22 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x5480-0x5487, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x5488-0x548f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSC0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) Time: acpi_pm clocksource has been installed. Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 386k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [IR1] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [IR1] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfb012000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected md: raid1 personality registered for level 1 SCSI subsystem initialized ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 185 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Vendor: IBM Model: DDYS-T36950N Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:1:0: Tagged Queuing enabled. Depth 4 target0:0:1: Beginning Domain Validation target0:0:1: wide asynchronous target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target0:0:1: Ending Domain Validation SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:1:0: Attached scsi disk sda Vendor: IBM Model: DDYS-T36950N Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:2:0: Tagged Queuing enabled. Depth 4 target0:0:2: Beginning Domain Validation target0:0:2: wide asynchronous target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target0:0:2: Ending Domain Validation SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB) sdb: Write Protect is off sdb: Mode Sense: cb 00 00 08 SCSI device sdb: drive cache: write back SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB) sdb: Write Protect is off sdb: Mode Sense: cb 00 00 08 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 0:0:2:0: Attached scsi disk sdb ACPI: PCI Interrupt 0000:01:04.1[B] -> GSI 17 (level, low) -> IRQ 193 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com md: Autodetecting RAID arrays. md: autorun ... md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1163096427.986:2): selinux=0 auid=4294967295 Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 23 (level, low) -> IRQ 201 e1000: 0000:00:07.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:61:35:4f input: PC Speaker as /class/input/input0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device sd 0:0:1:0: Attached scsi generic sg0 type 0 sd 0:0:2:0: Attached scsi generic sg1 type 0 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 18 (level, low) -> IRQ 209 e100: eth1: e100_probe: addr 0xfb011000, irq 209, MAC addr 00:D0:B7:B7:B4:B8 binder: module loaded ACPI: PCI interrupt for device 0000:00:08.0 disabled PCI: Enabling device 0000:00:08.0 (0108 -> 010a) ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 24 (level, low) -> IRQ 217 ce: at 0xfb013000 irq 217 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). lp0: console ready ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a ibm_acpi: http://ibm-acpi.sf.net/ md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1048568k swap on /dev/vvg0/swap. Priority:-1 extents:1 across:1048568k ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8191 buckets, 65528 max) - 228 bytes per conntrack Zapata Telephony Interface Registered on major 196 Zaptel Version: Echo Canceller: MG2 Registered tone zone 0 (United States / North America) e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present