Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10) ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:09: ioport range 0x480-0x48f has been reserved pnp: 00:09: ioport range 0x5c0-0x5cf has been reserved pnp: 00:0d: ioport range 0x540-0x55f has been reserved pnp: 00:0d: ioport range 0x400-0x47f could not be reserved pnp: 00:0d: ioport range 0x480-0x48f has been reserved pnp: 00:0d: ioport range 0x500-0x53f has been reserved pnp: 00:0d: ioport range 0x4c0-0x4cf has been reserved PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: ff800000-ff8fffff PREFETCH window: ce900000-de9fffff PCI: Bus 3, cardbus bridge: 0000:02:01.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 32000000-33ffffff MEM window: 34000000-35ffffff PCI: Bus 7, cardbus bridge: 0000:02:01.1 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 36000000-37ffffff MEM window: 38000000-39ffffff PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: ff900000-ff9fffff PREFETCH window: dea00000-deafffff PCI: Enabling device 0000:00:1e.0 (0106 -> 0107) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:02:01.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 PCI: Setting latency timer of device 0000:02:01.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:02:01.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Machine check exception polling timer started. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/O]. fuse init (API version 7.7) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Using specific hotkey driver ACPI: Invalid PBLK length [7] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THRM] (25 C) Asus Laptop ACPI Extras version 0.30 M6NE model detected, supported lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 ACPI: PCI interrupt for device 0000:00:1f.6 disabled parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:2f:8d:b2:b5 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: IC25N060ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 512KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[ff9ef800-ff9effff] Max Packet=[2048] IR/IT contexts=[4/4] ieee1394: raw1394: /dev/raw1394 device initialized Yenta: CardBus bridge found at 0000:02:01.0 [1043:1864] Yenta: ISA IRQ mask 0x0028, PCI irq 4 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff cs: IO port probe 0x1000-0x1fff: clean. pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff Yenta: CardBus bridge found at 0000:02:01.1 [1043:1864] Yenta: ISA IRQ mask 0x0028, PCI irq 11 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff cs: IO port probe 0x1000-0x1fff: clean. pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff usbmon: debugfs is not available ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000ec00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800031fe66b] input: AT Translated Set 2 keyboard as /class/input/input0 Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0 intel8x0_measure_ac97_clock: measured 60000 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with STAC9750,51 at 0xffaff800, irq 4 ip_conntrack version 2.4 (4090 buckets, 32720 max) - 172 bytes per conntrack input: SynPS/2 Synaptics TouchPad as /class/input/input1 ip_conntrack_pptp version 3.1 loaded TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S3 S4 S5) Time: acpi_pm clocksource has been installed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 224k freed cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ts: Compaq touchscreen protocol output EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hda5, internal journal NTFS volume version 3.1. Adding 506008k swap on /dev/hda6. Priority:-1 extents:1 across:506008k ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2km ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.25.0 20060524 on minor 0 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 2 usecs PPP BSD Compression module registered PPP Deflate Compression module registered NTFS-fs error (device hda2): ntfs_readdir(): Directory index record with vcn 0x200 is corrupt. Corrupt inode 0x20. Run chkdsk. ACPI: PCI interrupt for device 0000:02:02.0 disabled ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2km ipw2200: Copyright(c) 2003-2006 Intel Corporation PCI: Enabling device 0000:02:02.0 (0100 -> 0102) ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. ACPI: read EC, OB not full ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands for [OpcodeName unavailable] [20060707] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RWRD] (Node c1470c84), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT1.BST3] (Node c146da2c), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT1._BST] (Node c146db30), AE_TIME ACPI Exception (acpi_battery-0206): AE_TIME, Evaluating _BST [20060707] ACPI: read EC, OB not full ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.ACS_] (Node c1470f2c), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0.BST0] (Node c146d310), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._BST] (Node c146d3d8), AE_TIME ACPI Exception (acpi_battery-0206): AE_TIME, Evaluating _BST [20060707] ACPI: write EC, IB not empty ACPI: read EC, OB not full ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.BATS] (Node c1470f18), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._BST] (Node c146d3d8), AE_TIME ACPI Exception (acpi_battery-0206): AE_TIME, Evaluating _BST [20060707] ACPI: read EC, OB not full ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707] ACPI Exception (dswexec-0458): AE_TIME, While resolving operands for [OpcodeName unavailable] [20060707] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RWRD] (Node c1470c84), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0.BST3] (Node c146d2d4), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._BST] (Node c146d3d8), AE_TIME ACPI Exception (acpi_battery-0206): AE_TIME, Evaluating _BST [20060707]