linux-kernel - Re: [PATCH] Add IDE mode support for SB600 SATA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20061122183122.1a137815.akpm@osdl.org>
Date:	Wed, 22 Nov 2006 18:31:22 -0800
From:	Andrew Morton <akpm@...l.org>
To:	"Conke Hu" <conke.hu@....com>
Cc:	<linux-kernel@...r.kernel.org>,
	Anatoli Antonovitch <antonovi@....com>,
	Jeff Garzik <jeff@...zik.org>, Tejun Heo <htejun@...il.com>
Subject: Re: [PATCH] Add IDE mode support for SB600 SATA

On Thu, 23 Nov 2006 06:23:50 +0800
"Conke Hu" <conke.hu@....com> wrote:

> ATI SB600 SATA controller supports 4 modes: Legacy IDE, Native IDE, AHCI and RAID. Legacy/Native IDE mode is designed for compatibility with some old OS without AHCI driver but looses SATAII/AHCI features such as NCQ. This patch provides users with two options when the SB600 SATA is set as IDE mode by BIOS:
> 1. Setting the controller back to AHCI mode and using ahci as its driver.
> 2. Using the controller as a normal IDE.
> What's more, without this patch, ahci driver always tries to claim all 4 modes of SB600 SATA, but fails in legacy IDE mode.
> 
> Signed-off-by: conke.hu@....com
> -------
> diff -Nur linux-2.6.19-rc6-git4.orig/drivers/ata/ahci.c linux-2.6.19-rc6-git4/drivers/ata/ahci.c
> --- linux-2.6.19-rc6-git4.orig/drivers/ata/ahci.c	2006-11-23 13:36:52.000000000 +0800
> +++ linux-2.6.19-rc6-git4/drivers/ata/ahci.c	2006-11-23 13:50:13.000000000 +0800
> @@ -323,7 +323,14 @@
>  	{ PCI_VDEVICE(JMICRON, 0x2366), board_ahci }, /* JMicron JMB366 */
>  
>  	/* ATI */
> +#ifdef CONFIG_SB600_AHCI_IDE
>  	{ PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */
> +#else
> +	{ PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID<<8, 0xffff00, 
> +	  board_ahci },
> +	{ PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0x010600, 0xffff00, 
> +	  board_ahci },
> +#endif

And your patch conflicts in mysterious ways with the below.

I've been sitting on this patch for three months.  I don't know why.


From: "Anatoli Antonovitch" <antonovi@....com>

Automatically match the proper driver for different SATA/IDE modes of SB600
SATA controller: ahci for SATA/Native IDE/RAID modes and ATIIXP_IDE for legacy
mode.

Signed-off-by: Anatoli Antonovitch <antonovi@....com>
Cc: Jeff Garzik <jeff@...zik.org>
Cc: Alan Cox <alan@...rguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@...l.org>
---

 drivers/ata/ahci.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff -puN drivers/ata/ahci.c~ahci-ati-sb600-sata-support-for-various-modes drivers/ata/ahci.c
--- a/drivers/ata/ahci.c~ahci-ati-sb600-sata-support-for-various-modes
+++ a/drivers/ata/ahci.c
@@ -323,7 +323,12 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(JMICRON, 0x2366), board_ahci }, /* JMicron JMB366 */
 
 	/* ATI */
-	{ PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID,
+	  PCI_ANY_ID, 0x010600, 0xffff00, board_ahci }, /* ATI SB600 AHCI */
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID,
+	  PCI_ANY_ID, 0x010400, 0xffff00, board_ahci }, /* ATI SB600 raid */
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID,
+	  PCI_ANY_ID, (PCI_CLASS_STORAGE_IDE<<8)|0x8f, 0xffff05, board_ahci }, /* ATI SB600 native IDE */
 	{ PCI_VDEVICE(ATI, 0x4381), board_ahci }, /* ATI SB600 raid */
 
 	/* VIA */
_

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/