| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.64.0611261101460.26743@localhost.localdomain>
Date: Sun, 26 Nov 2006 11:01:56 -0500 (EST)
From: "Robert P. J. Day" <rpjday@...dspring.com>
To: Linux kernel mailing list <linux-kernel@...r.kernel.org>
cc: trivial@...nel.org
Subject: [PATCH] kconfig: Standardize "depends" -> "depends on" in Kconfig
files
Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.
Signed-off-by: Robert P. J. Day <rpjday@...dspring.com>
---
This patch doesn't address the redundancy of "requires", nor does it
simplify the kconf parser. I'll leave that job to someone else.
Documentation/kbuild/kconfig-language.txt | 8 ++++----
arch/arm/mach-pxa/Kconfig | 16 ++++++++--------
arch/arm/plat-omap/Kconfig | 2 +-
arch/powerpc/platforms/4xx/Kconfig | 2 +-
arch/powerpc/platforms/embedded6xx/Kconfig | 2 +-
arch/ppc/Kconfig | 4 ++--
arch/ppc/platforms/4xx/Kconfig | 2 +-
arch/v850/Kconfig | 28 ++++++++++++++--------------
drivers/char/Kconfig | 2 +-
drivers/ide/Kconfig | 2 +-
drivers/leds/Kconfig | 22 +++++++++++-----------
drivers/serial/Kconfig | 4 ++--
fs/Kconfig | 2 +-
sound/aoa/fabrics/Kconfig | 2 +-
14 files changed, 49 insertions(+), 49 deletions(-)
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 125093c..536d5bf 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -29,7 +29,7 @@ them. A single configuration option is d
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
help
Usually, modules have to be recompiled whenever you switch to a new
kernel. ...
@@ -163,7 +163,7 @@ The position of a menu entry in the tree
it can be specified explicitly:
menu "Network device support"
- depends NET
+ depends on NET
config NETDEVICES
...
@@ -188,10 +188,10 @@ config MODULES
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
comment "module support disabled"
- depends !MODULES
+ depends on !MODULES
MODVERSIONS directly depends on MODULES, this means it's only visible if
MODULES is different from 'n'. The comment on the other hand is always
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 03d07ca..bc1038c 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -78,28 +78,28 @@ endmenu
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
@@ -107,17 +107,17 @@ config MACH_AKITA
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
config PXA25x
bool
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ec752e1..f2dc363 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -113,7 +113,7 @@ endchoice
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends OMAP_MUX
+ depends on OMAP_MUX
default y
help
Select this option if you want to have your system wake up
diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig
index ed39d6a..2f2a13e 100644
--- a/arch/powerpc/platforms/4xx/Kconfig
+++ b/arch/powerpc/platforms/4xx/Kconfig
@@ -179,7 +179,7 @@ config BIOS_FIXUP
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 234a861..9a42928 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -35,7 +35,7 @@ config HDPU
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 077711e..8e10bce 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -600,7 +600,7 @@ config HDPU
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
@@ -711,7 +711,7 @@ config LITE5200
config LITE5200B
bool "Freescale LITE5200B"
- depends LITE5200
+ depends on LITE5200
help
Support for the LITE5200B dev board for the MPC5200 from Freescale.
This is the new board with 2 PCI slots.
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 293bd48..6980de4 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -189,7 +189,7 @@ config BIOS_FIXUP
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index 37ec644..54b7904 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -97,17 +97,17 @@ menu "Processor type and features"
# currently support
config V850E_MA1
bool
- depends RTE_CB_MA1
+ depends on RTE_CB_MA1
default y
# Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
config V850E_TEG
bool
- depends RTE_CB_NB85E
+ depends on RTE_CB_NB85E
default y
# ... and the RTE-V850E/ME2-CB - V850E/ME2
config V850E_ME2
bool
- depends RTE_CB_ME2
+ depends on RTE_CB_ME2
default y
@@ -115,7 +115,7 @@ menu "Processor type and features"
config V850E2_SIM85E2
bool
- depends V850E2_SIM85E2C || V850E2_SIM85E2S
+ depends on V850E2_SIM85E2C || V850E2_SIM85E2S
default y
@@ -124,7 +124,7 @@ menu "Processor type and features"
# V850E2 processors
config V850E2
bool
- depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
+ depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
default y
@@ -133,7 +133,7 @@ menu "Processor type and features"
# Boards in the RTE-x-CB series
config RTE_CB
bool
- depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
+ depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
default y
config RTE_CB_MULTI
@@ -141,28 +141,28 @@ menu "Processor type and features"
# RTE_CB_NB85E can either have multi ROM support or not, but
# other platforms (currently only RTE_CB_MA1) require it.
prompt "Multi monitor ROM support" if RTE_CB_NB85E
- depends RTE_CB_MA1 || RTE_CB_NB85E
+ depends on RTE_CB_MA1 || RTE_CB_NB85E
default y
config RTE_CB_MULTI_DBTRAP
bool "Pass illegal insn trap / dbtrap to kernel"
- depends RTE_CB_MULTI
+ depends on RTE_CB_MULTI
default n
config RTE_CB_MA1_KSRAM
bool "Kernel in SRAM (limits size of kernel)"
- depends RTE_CB_MA1 && RTE_CB_MULTI
+ depends on RTE_CB_MA1 && RTE_CB_MULTI
default n
config RTE_MB_A_PCI
bool "Mother-A PCI support"
- depends RTE_CB
+ depends on RTE_CB
default y
# The GBUS is used to talk to the RTE-MOTHER-A board
config RTE_GBUS_INT
bool
- depends RTE_MB_A_PCI
+ depends on RTE_MB_A_PCI
default y
# The only PCI bus we support is on the RTE-MOTHER-A board
@@ -201,7 +201,7 @@ menu "Processor type and features"
config ROM_KERNEL
bool "Kernel in ROM"
- depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
+ depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
# Some platforms pre-zero memory, in which case the kernel doesn't need to
config ZERO_BSS
@@ -217,10 +217,10 @@ menu "Processor type and features"
config V850E_HIGHRES_TIMER
bool "High resolution timer support"
- depends V850E_TIMER_D
+ depends on V850E_TIMER_D
config TIME_BOOTUP
bool "Time bootup"
- depends V850E_HIGHRES_TIMER
+ depends on V850E_HIGHRES_TIMER
config RESET_GUARD
bool "Reset Guard"
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 2af12fc..3e8d920 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -852,7 +852,7 @@ config SONYPI
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB022X
+ depends on TANBAC_TB022X
select GPIO_VR41XX
menu "Ftape, the floppy tape device driver"
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 0c68d0f..4464902 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -796,7 +796,7 @@ endchoice
config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
int "Maximum transfer size (KB) per request (up to 128)"
default "128"
- depends BLK_DEV_IDE_AU1XXX
+ depends on BLK_DEV_IDE_AU1XXX
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9c39b98..852dd88 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -12,7 +12,7 @@ config NEW_LEDS
config LEDS_CLASS
tristate "LED Class Support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
@@ -21,28 +21,28 @@ comment "LED drivers"
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
- depends LEDS_CLASS && PXA_SHARP_C7xx
+ depends on LEDS_CLASS && PXA_SHARP_C7xx
help
This option enables support for the LEDs on Sharp Zaurus
SL-C7x0 series (C700, C750, C760, C860).
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
- depends LEDS_CLASS && SHARP_LOCOMO
+ depends on LEDS_CLASS && SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_SPITZ
tristate "LED Support for the Sharp SL-Cxx00 series"
- depends LEDS_CLASS && PXA_SHARP_Cxx00
+ depends on LEDS_CLASS && PXA_SHARP_Cxx00
help
This option enables support for the LEDs on Sharp Zaurus
SL-Cxx00 series (C1000, C3000, C3100).
config LEDS_IXP4XX
tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
- depends LEDS_CLASS && ARCH_IXP4XX
+ depends on LEDS_CLASS && ARCH_IXP4XX
help
This option enables support for the LEDs connected to GPIO
outputs of the Intel IXP4XX processors. To be useful the
@@ -51,7 +51,7 @@ config LEDS_IXP4XX
config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series"
- depends LEDS_CLASS && PXA_SHARPSL
+ depends on LEDS_CLASS && PXA_SHARPSL
help
This option enables support for the LEDs on Sharp Zaurus
SL-6000 series.
@@ -65,7 +65,7 @@ config LEDS_S3C24XX
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
- depends LEDS_CLASS && MACH_AMS_DELTA
+ depends on LEDS_CLASS && MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
@@ -80,7 +80,7 @@ comment "LED Triggers"
config LEDS_TRIGGERS
bool "LED Trigger support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
@@ -88,21 +88,21 @@ config LEDS_TRIGGERS
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. If unsure, say Y.
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+ depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0b71e7d..f652f82 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -634,7 +634,7 @@ config V850E_UART
config V850E_UARTB
bool
- depends V850E_UART && V850E_ME2
+ depends on V850E_UART && V850E_ME2
default y
config V850E_UART_CONSOLE
@@ -880,7 +880,7 @@ config SERIAL_M32R_PLDSIO
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends on HAS_TXX9_SERIAL
select SERIAL_CORE
default y
diff --git a/fs/Kconfig b/fs/Kconfig
index 7b1511d..7f4c418 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1008,7 +1008,7 @@ config TMPFS_POSIX_ACL
config HUGETLBFS
bool "HugeTLB file system support"
- depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
+ depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
diff --git a/sound/aoa/fabrics/Kconfig b/sound/aoa/fabrics/Kconfig
index c3bc770..50d7021 100644
--- a/sound/aoa/fabrics/Kconfig
+++ b/sound/aoa/fabrics/Kconfig
@@ -1,6 +1,6 @@
config SND_AOA_FABRIC_LAYOUT
tristate "layout-id fabric"
- depends SND_AOA
+ depends on SND_AOA
select SND_AOA_SOUNDBUS
select SND_AOA_SOUNDBUS_I2S
---help---
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists