Linux version 2.6.19-rc6 (root@megaman) (gcc version 3.4.6) #1 Thu Nov 23 16:01:38 BRST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bef0000 (usable) BIOS-e820: 000000001bef0000 - 000000001befa000 (ACPI data) BIOS-e820: 000000001befa000 - 000000001bf00000 (ACPI NVS) BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 446MB LOWMEM available. Entering add_active_range(0, 0, 114416) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114416 HighMem 114416 -> 114416 early_node_map[1] active PFN ranges 0: 0 -> 114416 On node 0 totalpages: 114416 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 861 pages used for memmap Normal zone: 109459 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) Detected 1800.159 MHz processor. Built 1 zonelists. Total pages: 113523 Kernel command line: BOOT_IMAGE=Linux-Test ro root=305 acpi=off Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 449252k/457664k available (2383k kernel code, 7860k reserved, 704k data, 208k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffea000 - 0xfffff000 ( 84 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB) .init : 0xc0406000 - 0xc043a000 ( 208 kB) .data : 0xc0353de5 - 0xc0403ff4 ( 704 kB) .text : 0xc0100000 - 0xc0353de5 (2383 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3601.94 BogoMIPS (lpj=7203886) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02 Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 376k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Uncovering SIS963 that hid as a SIS503 (compatible=0) Enabling SiS 96x SMBus. PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 Boot video device is 0000:01:00.0 PCI: Using IRQ router SIS [1039/0963] at 0000:00:02.0 PCI: setting IRQ 4 as level-triggered PCI: Found IRQ 4 for device 0000:00:02.1 PCI: Sharing IRQ 4 with 0000:00:0b.0 PCI: setting IRQ 7 as level-triggered PCI: Found IRQ 7 for device 0000:00:02.5 PCI: setting IRQ 3 as level-triggered PCI: Found IRQ 3 for device 0000:00:06.0 PCI: Sharing IRQ 3 with 0000:00:04.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: e2100000-e21fffff PREFETCH window: e8000000-efffffff PCI: Bus 2, cardbus bridge: 0000:00:06.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Enabling device 0000:00:06.0 (0000 -> 0003) PCI: Found IRQ 3 for device 0000:00:06.0 PCI: Sharing IRQ 3 with 0000:00:04.0 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered apm: BIOS not found. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xe8000000, mapped to 0xdc800000, using 3072k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at cbe6:000c vesafb: pmi: set display start = c00cbe96, set palette = c00cbeda vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PCI: setting IRQ 5 as level-triggered PCI: Found IRQ 5 for device 0000:00:02.6 PCI: Sharing IRQ 5 with 0000:00:02.7 floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 PCI: Found IRQ 7 for device 0000:00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS424040M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Slimtype COMBO SOSC-2483K, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbmon: debugfs is not available usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Time: tsc clocksource has been installed. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). EXT2-fs warning (device hda5): ext2_fill_super: mounting ext3 filesystem as ext2 VFS: Mounted root (ext2 filesystem) readonly. Trying to move old root to /initrd ... <6>input: AT Translated Set 2 keyboard as /class/input/input0 okay Freeing unused kernel memory: 208k freed Adding 1004020k swap on /dev/hda1. Priority:-1 extents:1 across:1004020k Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected SiS 760 chipset agpgart: AGP aperture is 4M @ 0xe0000000 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: setting IRQ 9 as level-triggered PCI: Found IRQ 9 for device 0000:00:03.0 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 9, io mem 0xe2002000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected libata version 2.00 loaded. PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:00:03.1 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 11, io mem 0xe2003000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected sis900.c: v1.08.10 Apr. 2 2006 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:03.2 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:03.2 ehci_hcd 0000:00:03.2: irq 10, io mem 0xe2004000 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected input: PC Speaker as /class/input/input1 Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64 Yenta: ISA IRQ mask 0x0040, PCI irq 3 Socket status: 30000006 PCI: Found IRQ 3 for device 0000:00:04.0 PCI: Sharing IRQ 3 with 0000:00:06.0 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. 0000:00:04.0: Using transceiver found at address 13 as default eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 3, 00:c0:9f:da:d1:08. PCI: Found IRQ 5 for device 0000:00:02.7 PCI: Sharing IRQ 5 with 0000:00:02.6 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0xa00-0xaff: clean. intel8x0_measure_ac97_clock: measured 55456 usecs intel8x0: clocking to 48000 lp: driver loaded but no devices found fuse init (API version 7.7) Capability LSM initialized powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (version 2.00.00) powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x13 powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: unable to find recovery directory /var/lib/nfs/v4recovery NFSD: starting 90-second grace period TSC appears to be running slowly. Marking it as unstable Time: pit clocksource has been installed. eth0: Media Link On 100mbps full-duplex eth0: no IPv6 routers present