Linux version 2.6.19-rc6 (root@megaman) (gcc version 3.4.6) #1 Thu Nov 23 16:01:38 BRST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bef0000 (usable) BIOS-e820: 000000001bef0000 - 000000001befa000 (ACPI data) BIOS-e820: 000000001befa000 - 000000001bf00000 (ACPI NVS) BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 446MB LOWMEM available. Entering add_active_range(0, 0, 114416) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114416 HighMem 114416 -> 114416 early_node_map[1] active PFN ranges 0: 0 -> 114416 On node 0 totalpages: 114416 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 861 pages used for memmap Normal zone: 109459 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7f60 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bef619d ACPI: FADT (v001 SiS 755F 0x06040000 PTL 0x000f4240) @ 0x1bef9e3e ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1bef9eb2 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1bef9f88 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1bef9fd8 ACPI: DSDT (v001 PTLTD 755 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) Detected 1800.146 MHz processor. Built 1 zonelists. Total pages: 113523 Kernel command line: BOOT_IMAGE=Linux-Test ro root=305 3 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 449252k/457664k available (2383k kernel code, 7860k reserved, 704k data, 208k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffea000 - 0xfffff000 ( 84 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB) .init : 0xc0406000 - 0xc043a000 ( 208 kB) .data : 0xc0353de5 - 0xc0403ff4 ( 704 kB) .text : 0xc0100000 - 0xc0353de5 (2383 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3601.97 BogoMIPS (lpj=7203943) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0800 (from 0eb8) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 376k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS963 that hid as a SIS503 (compatible=0) Enabling SiS 96x SMBus. PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: e2100000-e21fffff PREFETCH window: e8000000-efffffff PCI: Bus 2, cardbus bridge: 0000:00:06.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Enabling device 0000:00:06.0 (0000 -> 0003) ACPI: Unable to derive IRQ for device 0000:00:06.0 ACPI: PCI Interrupt 0000:00:06.0[A]: no GSI NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x38 set to 0x1 apm: BIOS not found. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xe8000000, mapped to 0xdc880000, using 3072k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at cbe6:000c vesafb: pmi: set display start = c00cbe96, set palette = c00cbeda vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:02.6 disabled floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS424040M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Slimtype COMBO SOSC-2483K, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbmon: debugfs is not available usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). input: AT Translated Set 2 keyboard as /class/input/input0 EXT2-fs warning (device hda5): ext2_fill_super: mounting ext3 filesystem as ext2 VFS: Mounted root (ext2 filesystem) readonly. Trying to move old root to /initrd ... okay Freeing unused kernel memory: 208k freed Adding 1004020k swap on /dev/hda1. Priority:-1 extents:1 across:1004020k ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 input: PC Speaker as /class/input/input1 Linux agpgart interface v0.101 (c) Dave Jones libata version 2.00 loaded. sis900.c: v1.08.10 Apr. 2 2006 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) intel8x0_measure_ac97_clock: measured 55470 usecs intel8x0: clocking to 48000 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 agpgart: Detected SiS 760 chipset agpgart: AGP aperture is 4M @ 0xe0000000 sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64 Yenta: request_irq() in yenta_probe_cb_irq() failed! Yenta TI: socket 0000:00:06.0 no PCI interrupts. Fish. Please report. Yenta: no PCI IRQ, CardBus support disabled for this socket. Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings. Yenta: ISA IRQ mask 0x0658, PCI irq 0 Socket status: 30000006 ACPI: Unable to derive IRQ for device 0000:00:04.0 ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI - using IRQ 3 PCI: setting IRQ 3 as level-triggered 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. 0000:00:04.0: Using transceiver found at address 13 as default eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 3, 00:c0:9f:da:d1:08. ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 9, io mem 0xe2002000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 11, io mem 0xe2003000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:03.2[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:03.2 ehci_hcd 0000:00:03.2: irq 10, io mem 0xe2004000 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0xa00-0xaff: clean. lp: driver loaded but no devices found fuse init (API version 7.7) Capability LSM initialized ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (version 2.00.00) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13 Time: acpi_pm clocksource has been installed. Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: unable to find recovery directory /var/lib/nfs/v4recovery NFSD: starting 90-second grace period irq 3: nobody cared (try booting with the "irqpoll" option) [] __report_bad_irq+0x2a/0x90 [] note_interrupt+0x99/0xd0 [] handle_level_irq+0xd0/0x100 [] do_IRQ+0x48/0x90 [] do_IRQ+0x4d/0x90 [] common_interrupt+0x1a/0x20 [] hrtimer_get_softirq_time+0x31/0xb0 [] hrtimer_get_softirq_time+0x4/0xb0 [] hrtimer_run_queues+0x15/0xc0 [] run_timer_softirq+0x12/0x190 [] run_timer_softirq+0x4/0x190 [] __do_softirq+0x51/0xb0 [] do_softirq+0x35/0x40 [] do_IRQ+0x4d/0x90 [] common_interrupt+0x1a/0x20 ======================= handlers: [] (sis900_interrupt+0x0/0x120 [sis900]) Disabling IRQ #3 eth0: Media Link On 100mbps full-duplex eth0: no IPv6 routers present