Linux version 2.6.19-rc6 (root@megaman) (gcc version 3.4.6) #1 Thu Nov 23 16:01:38 BRST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bef0000 (usable) BIOS-e820: 000000001bef0000 - 000000001befa000 (ACPI data) BIOS-e820: 000000001befa000 - 000000001bf00000 (ACPI NVS) BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 446MB LOWMEM available. Entering add_active_range(0, 0, 114416) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114416 HighMem 114416 -> 114416 early_node_map[1] active PFN ranges 0: 0 -> 114416 On node 0 totalpages: 114416 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 861 pages used for memmap Normal zone: 109459 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7f60 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bef619d ACPI: FADT (v001 SiS 755F 0x06040000 PTL 0x000f4240) @ 0x1bef9e3e ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1bef9eb2 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1bef9f88 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1bef9fd8 ACPI: DSDT (v001 PTLTD 755 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) Detected 1800.155 MHz processor. Built 1 zonelists. Total pages: 113523 Kernel command line: BOOT_IMAGE=Linux-Test ro root=305 irqpoll Misrouted IRQ fixup and polling support enabled This may significantly impact system performance Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 449252k/457664k available (2383k kernel code, 7860k reserved, 704k data, 208k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffea000 - 0xfffff000 ( 84 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB) .init : 0xc0406000 - 0xc043a000 ( 208 kB) .data : 0xc0353de5 - 0xc0403ff4 ( 704 kB) .text : 0xc0100000 - 0xc0353de5 (2383 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3602.00 BogoMIPS (lpj=7204007) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0800 (from 0eb8) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 376k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS963 that hid as a SIS503 (compatible=0) Enabling SiS 96x SMBus. PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: e2100000-e21fffff PREFETCH window: e8000000-efffffff PCI: Bus 2, cardbus bridge: 0000:00:06.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Enabling device 0000:00:06.0 (0000 -> 0003) ACPI: Unable to derive IRQ for device 0000:00:06.0 ACPI: PCI Interrupt 0000:00:06.0[A]: no GSI NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x38 set to 0x1 apm: BIOS not found. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xe8000000, mapped to 0xdc880000, using 3072k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at cbe6:000c vesafb: pmi: set display start = c00cbe96, set palette = c00cbeda vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:02.6 disabled floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS424040M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... spurious 8259A interrupt: IRQ7. hdc: Slimtype COMBO SOSC-2483K, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbmon: debugfs is not available usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). input: AT Translated Set 2 keyboard as /class/input/input0 EXT2-fs warning (device hda5): ext2_fill_super: mounting ext3 filesystem as ext2 VFS: Mounted root (ext2 filesystem) readonly. Trying to move old root to /initrd ... okay Freeing unused kernel memory: 208k freed Adding 1004020k swap on /dev/hda1. Priority:-1 extents:1 across:1004020k sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 Linux agpgart interface v0.101 (c) Dave Jones libata version 2.00 loaded. agpgart: Detected SiS 760 chipset agpgart: AGP aperture is 4M @ 0xe0000000 ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 input: PC Speaker as /class/input/input1 sis900.c: v1.08.10 Apr. 2 2006 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) intel8x0_measure_ac97_clock: measured 55456 usecs intel8x0: clocking to 48000 ACPI: Unable to derive IRQ for device 0000:00:04.0 ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI - using IRQ 3 PCI: setting IRQ 3 as level-triggered 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. 0000:00:04.0: Using transceiver found at address 13 as default eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 3, 00:c0:9f:da:d1:08. Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64 Yenta: request_irq() in yenta_probe_cb_irq() failed! Yenta TI: socket 0000:00:06.0 no PCI interrupts. Fish. Please report. Yenta: no PCI IRQ, CardBus support disabled for this socket. Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings. Yenta: ISA IRQ mask 0x0650, PCI irq 0 Socket status: 30000006 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:03.2[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:03.2 ehci_hcd 0000:00:03.2: irq 10, io mem 0xe2004000 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 9, io mem 0xe2002000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 11, io mem 0xe2003000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0xa00-0xaff: clean. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 lp: driver loaded but no devices found fuse init (API version 7.7) Capability LSM initialized ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (version 2.00.00) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13 Time: acpi_pm clocksource has been installed. Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: unable to find recovery directory /var/lib/nfs/v4recovery NFSD: starting 90-second grace period eth0: Media Link Off ADDRCONF(NETDEV_UP): eth0: link is not ready irq 3: nobody cared (try booting with the "irqpoll" option) [] __report_bad_irq+0x2a/0x90 [] note_interrupt+0x99/0xd0 [] handle_level_irq+0xd0/0x100 [] do_IRQ+0x48/0x90 [] acpi_hw_register_write+0xe3/0x1e9 [] common_interrupt+0x1a/0x20 [] acpi_processor_idle+0x1f3/0x317 [processor] [] cpu_idle+0x1c/0x60 [] start_kernel+0x1b6/0x220 [] unknown_bootoption+0x0/0x1e0 ======================= handlers: [] (sis900_interrupt+0x0/0x120 [sis900]) Disabling IRQ #3