Linux version 2.6.18.3 (root@amanpulo.fs3.ph) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Tue Nov 28 11:11:33 PHT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007feff000 (ACPI data) BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 000000007ff80000 (usable) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec04000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7120 On node 0 totalpages: 524160 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294784 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 PTLTD ) @ 0x000f70b0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7fefcf55 ACPI: FADT (v001 AMD TECATE 0x06040000 PTL 0x000f4240) @ 0x7fefef2e ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7fefefa2 ACPI: DSDT (v001 AMD AMDACPI 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled) Processor #1 6:10 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Detected 2000.112 MHz processor. Built 1 zonelists. Total pages: 524160 Kernel command line: auto BOOT_IMAGE=Linux rw root=900 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2074972k/2096640k available (2082k kernel code, 20392k reserved, 593k data, 200k init, 1179072k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4005.48 BogoMIPS (lpj=8010975) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 12k freed ACPI: Core revision 20060707 CPU0: AMD Athlon(tm) MP 2600+ stepping 00 Booting processor 1/0 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4000.29 BogoMIPS (lpj=8000594) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 CPU1: AMD Athlon(tm) Processor stepping 00 Total of 2 processors activated (8005.78 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=1042 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd7c0, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:01:05.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.OP2P._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 *10 11) AMD768 RNG detected PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: e8000000-e80fffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:00:10.0 IO window: 3000-3fff MEM window: e8100000-e81fffff PREFETCH window: 88000000-880fffff NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered highmem bounce pool size: 64 pages SGI XFS with no debug enabled io scheduler noop registered io scheduler deadline registered (default) BIOS failed to enable PCI standards compliance, fixing this error. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Power Button (CM) [PWRB] Real Time Clock Driver v1.12ac Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 16 e100: eth0: e100_probe: addr 0xe8121000, irq 16, MAC addr 00:0E:0C:9C:BA:95 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller at PCI slot 0000:00:07.1 AMD7441: chipset revision 4 AMD7441: not 100% native mode: will probe irqs later AMD7441: 0000:00:07.1 (rev 04) UDMA100 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: WDC WD800JB-00FMA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: WDC WD800JB-00FMA0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: max request size: 128KiB hdc: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice w83781d 0-002c: Subclient 0 registration at address 0x49 failed. md: raid1 personality registered for level 1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 ip_conntrack version 2.4 (8192 buckets, 65536 max) - 224 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode Time: acpi_pm clocksource has been installed. md: Autodetecting RAID arrays. md: autorun ... md: considering hdc3 ... md: adding hdc3 ... md: hdc2 has different UUID to hdc3 md: hdc1 has different UUID to hdc3 md: adding hda3 ... md: hda2 has different UUID to hdc3 md: hda1 has different UUID to hdc3 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering hdc2 ... md: adding hdc2 ... md: hdc1 has different UUID to hdc2 md: adding hda2 ... md: hda1 has different UUID to hdc2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering hdc1 ... md: adding hdc1 ... md: adding hda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. Filesystem "md0": Disabling barriers, not supported by the underlying device XFS mounting filesystem md0 Ending clean XFS mount for filesystem: md0 VFS: Mounted root (xfs filesystem). Freeing unused kernel memory: 200k freed Filesystem "md0": Disabling barriers, not supported by the underlying device Filesystem "md1": Disabling barriers, not supported by the underlying device XFS mounting filesystem md1 Ending clean XFS mount for filesystem: md1 Filesystem "md2": Disabling barriers, not supported by the underlying device XFS mounting filesystem md2 Ending clean XFS mount for filesystem: md2 e100: eth0: e100_watchdog: link up, 10Mbps, full-duplex