| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20061129170253.GH2418@jukie.net>
Date: Wed, 29 Nov 2006 12:02:53 -0500
From: Bart Trojanowski <bart@...ie.net>
To: linux-kernel@...r.kernel.org
Subject: 2.6.18.3 SMP PREEMPT crashes (x86-64)
Hi all,
I've been getting spurious hangs in 2.6.18 lately... first I thought it
was hardware but tried different replacement parts and memtest. Nothing
showed any problems.
I finally hooked up a serial console to the box and I see the following.
I include the initial dmesg output to show what's in the machine.
- Nforce4 based Shuttle XPC (PCIe, forcedeth, etc)
- Opteron 170 (dual core)
- ATI X300 video card (OSS drivers)
- 2 software raided SATA disks
The last crash occurred while I was building 2.6.19-rc5 to see if it
would make a difference. I've had it hang this way while typing into an
xterm... I don't think it required any particular load.
My .config is attached.
Any help would be appreciated.
Thanks in advance.
-Bart
[ 0.000000] Bootdata ok (command line is BOOT_IMAGE=v2.6.18.3 ro root=900 console=ttyS0,115200n8 console=tty0)
[ 0.000000] Linux version 2.6.18.3-xenon64-smp.9 (root@...on) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 SMP PREEMPT Wed Nov 29 10:20:42 EST 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:3 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:3 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257927
[ 0.000000] Kernel command line: BOOT_IMAGE=v2.6.18.3 ro root=900 console=ttyS0,115200n8 console=tty0
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Disabling vsyscall due to use of PM timer
[ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 0.000000] time.c: Detected 2010.319 MHz processor.
[ 42.677836] Console: colour VGA+ 80x50
[ 42.912332] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 42.920112] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 42.927135] Checking aperture...
[ 42.930408] CPU 0: aperture @ 4000000 size 32 MB
[ 42.935065] Aperture too small (32 MB)
[ 42.944006] No AGP bridge found
[ 42.947189] Your BIOS doesn't leave a aperture memory hole
[ 42.952715] Please enable the IOMMU option in the BIOS setup
[ 42.958413] This costs you 64 MB of RAM
[ 43.009987] Mapping aperture over 65536 KB of RAM @ 4000000
[ 43.028343] Memory: 958304k/1048512k available (3486k kernel code, 89540k reserved, 1521k data, 216k init)
[ 43.097928] Calibrating delay using timer specific routine.. 4022.42 BogoMIPS (lpj=2011214)
[ 43.106529] Security Framework v1.0.0 initialized
[ 43.111280] SELinux: Disabled at boot.
[ 43.115222] Mount-cache hash table entries: 256
[ 43.120158] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 43.127334] CPU: L2 Cache: 1024K (64 bytes/line)
[ 43.131992] CPU: Physical Processor ID: 0
[ 43.136043] CPU: Processor Core ID: 0
[ 43.139769] Freeing SMP alternatives: 28k freed
[ 43.144363] ACPI: Core revision 20060707
[ 43.167580] Using local APIC timer interrupts.
[ 43.221777] result 12564513
[ 43.224616] Detected 12.564 MHz APIC timer.
[ 43.230362] Booting processor 1/2 APIC 0x1
[ 43.244505] Initializing CPU#1
[ 43.305454] Calibrating delay using timer specific routine.. 4020.05 BogoMIPS (lpj=2010027)
[ 43.305461] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 43.305463] CPU: L2 Cache: 1024K (64 bytes/line)
[ 43.305465] CPU: Physical Processor ID: 0
[ 43.305467] CPU: Processor Core ID: 1
[ 43.305582] Dual Core AMD Opteron(tm) Processor 170 stepping 02
[ 43.306458] CPU 1: Syncing TSC to CPU 0.
[ 43.306830] CPU 1: synchronized TSC with CPU 0 (last diff 21 cycles, maxerr 434 cycles)
[ 43.306836] Brought up 2 CPUs
[ 43.359153] testing NMI watchdog ... OK.
[ 44.505548] migration_cost=457
[ 44.509877] NET: Registered protocol family 16
[ 44.514532] ACPI: bus type pci registered
[ 44.521996] PCI: Using MMCONFIG at e0000000
[ 44.526247] PCI: No mmconfig possible on device 0:18
[ 44.542156] ACPI: Interpreter enabled
[ 44.545861] ACPI: Using IOAPIC for interrupt routing
[ 44.551990] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 44.562340] PCI: Transparent bridge - 0000:00:09.0
[ 44.681143] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 44.690490] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 44.699847] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 44.707955] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 44.716065] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 44.725379] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 44.733466] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 44.742815] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 44.750920] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 44.760263] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 44.769593] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 44.777698] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 44.785806] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 44.795156] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 44.803257] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 44.811370] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 44.820793] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 44.827879] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 44.834961] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 44.842048] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 44.849001] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 44.855911] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 44.863953] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 44.871965] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 44.879984] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 44.888007] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 44.896024] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 44.904045] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 44.912066] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 44.920094] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 44.928112] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 44.936144] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 44.948033] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 44.953756] pnp: PnP ACPI init
[ 44.964277] pnp: PnP ACPI: found 11 devices
[ 44.968612] Generic PHY: Registered new driver
[ 44.974234] SCSI subsystem initialized
[ 44.978129] usbcore: registered new driver usbfs
[ 44.982879] usbcore: registered new driver hub
[ 44.988747] PCI: Using ACPI for IRQ routing
[ 44.992978] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 45.001487] PCI-DMA: Disabling AGP.
[ 45.005070] PCI-DMA: aperture base @ 4000000 size 65536 KB
[ 45.010599] PCI-DMA: using GART IOMMU.
[ 45.014394] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 45.021692] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[ 45.028431] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[ 45.034824] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
[ 45.041214] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
[ 45.047952] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
[ 45.054341] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
[ 45.061527] PCI: Bridge: 0000:00:09.0
[ 45.065239] IO window: a000-afff
[ 45.068684] MEM window: d8100000-d81fffff
[ 45.072909] PREFETCH window: disabled.
[ 45.076876] PCI: Bridge: 0000:00:0b.0
[ 45.080580] IO window: disabled.
[ 45.084027] MEM window: disabled.
[ 45.087562] PREFETCH window: disabled.
[ 45.091528] PCI: Bridge: 0000:00:0c.0
[ 45.095234] IO window: disabled.
[ 45.098682] MEM window: disabled.
[ 45.102215] PREFETCH window: disabled.
[ 45.106182] PCI: Bridge: 0000:00:0d.0
[ 45.109888] IO window: disabled.
[ 45.113335] MEM window: disabled.
[ 45.116868] PREFETCH window: disabled.
[ 45.120837] PCI: Bridge: 0000:00:0e.0
[ 45.124540] IO window: 9000-9fff
[ 45.127989] MEM window: d8000000-d80fffff
[ 45.132215] PREFETCH window: d0000000-d7ffffff
[ 45.136980] NET: Registered protocol family 2
[ 45.151451] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 45.159110] TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
[ 45.169673] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 45.177929] TCP: Hash tables configured (established 131072 bind 65536)
[ 45.184584] TCP reno registered
[ 45.193267] audit: initializing netlink socket (disabled)
[ 45.198735] audit(1160191405.089:1): initialized
[ 45.203720] VFS: Disk quotas dquot_6.5.1
[ 45.207722] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 45.214341] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 45.224362] SGI XFS Quota Management subsystem
[ 45.228922] Initializing Cryptographic API
[ 45.233070] io scheduler noop registered
[ 45.237101] io scheduler anticipatory registered (default)
[ 45.242726] io scheduler deadline registered
[ 45.247134] io scheduler cfq registered
[ 45.265842] PCI: Linking AER extended capability on 0000:00:0b.0
[ 45.271910] PCI: Linking AER extended capability on 0000:00:0c.0
[ 45.277953] PCI: Linking AER extended capability on 0000:00:0d.0
[ 45.283997] PCI: Linking AER extended capability on 0000:00:0e.0
[ 45.290391] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 45.297947] assign_interrupt_mode Found MSI capability
[ 45.303373] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 45.310925] assign_interrupt_mode Found MSI capability
[ 45.316307] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 45.323868] assign_interrupt_mode Found MSI capability
[ 45.329257] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 45.336810] assign_interrupt_mode Found MSI capability
[ 45.342220] ACPI: Power Button (FF) [PWRF]
[ 45.346370] ACPI: Power Button (CM) [PWRB]
[ 45.350530] ACPI: Fan [FAN] (on)
[ 45.353930] Using specific hotkey driver
[ 45.359101] ACPI: Thermal Zone [THRM] (40 C)
[ 45.416089] DoubleTalk PC - not found
[ 45.419902] Linux agpgart interface v0.101 (c) Dave Jones
[ 45.425355] [drm] Initialized drm 1.0.1 20051102
[ 45.430475] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 45.436263] GSI 16 sharing vector 0xD9 and IRQ 16
[ 45.441006] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 217
[ 45.450089] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 45.456053] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, mar8126] hda: PLEXTOR DVDR PX-716AL, ATAPI CD/DVD-ROM drive
[ 47.682452] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 47.688236] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
[ 47.694025] GSI 18 sharing vector 0xE9 and IRQ 18
[ 47.698771] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 233
[ 47.708344] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 233
[ 47.715516] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 233
[ 47.722622] scsi0 : sata_nv
[ 48.179012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 48.185786] ata1.00: ATA-7, max UDMA/133, 320170943 sectors: LBA48
[ 48.192092] ata1.00: ata1: dev 0 multi count 16
[ 48.197350] ata1.00: configured for UDMA/133
[ 48.201666] scsi1 : sata_nv
[ 48.658642] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 48.665426] ata2.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48
[ 48.671729] ata2.00: ata2: dev 0 multi count 16
[ 48.677011] ata2.00: configured for UDMA/133
[ 48.681442] Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
[ 48.688962] Type: Direct-Access ANSI SCSI revision: 05
[ 48.696766] Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
[ 48.704266] Type: Direct-Access ANSI SCSI revision: 05
[ 48.712743] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
[ 48.718535] GSI 19 sharing vector 0x32 and IRQ 19
[ 48.723277] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 50
[ 48.732468] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 50
[ 48.739559] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 50
[ 48.746569] scsi2 : sata_nv
[ 49.052326] ata3: SATA link down (SStatus 0 SControl 300)
[ 49.057767] scsi3 : sata_nv
[ 49.364085] ata4: SATA link down (SStatus 0 SControl 300)
[ 49.369818] SCSI device sda: 320170943 512-byte hdwr sectors (163928 MB)
[ 49.376571] sda: Write Protect is off
[ 49.380346] SCSI device sda: drive cache: write back
[ 49.385456] SCSI device sda: 320170943 512-byte h04] usbmon: debugfs is not available
[ 49.580828] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 49.586619] GSI 20 sharing vector 0x3A and IRQ 20
[ 49.591362] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 58
[ 49.600488] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 49.605980] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 49.613499] ehci_hcd 0000:00:02.1: debug port 1
[ 49.618083] ehci_hcd 0000:00:02.1: irq 58, io mem 0xd8205000
[ 49.623781] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 49.631593] usb usb1: configuration #1 chosen from 1 choice
[ 49.637309] hub 1-0:1.0: USB hub found
[ 49.641112] hub 1-0:1.0: 10 ports detected
[ 49.747731] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 49.753517] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 225
[ 49.762686] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 49.768136] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 49.775629] ohci_hcd 0000:00:02.0: irq 225, io mem 0xd8204000
[ 49.834982] usb usb2: configuration #1 chosen from 1 choice
[ 49.840699] hub 2-0:1.0: USB hub found
[ 49.844503] hub 2-0:1.0: 10 ports detected
[ 49.949873] USB Universal Host Controller Interface driver v3.0
[ 49.955832] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 50.081412] usb 1-2: configuration #1 chosen from 1 choice
[ 50.605132] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 50.741923] usb 1-6: configuration #1 chosen from 1 choice
[ 50.965854] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 51.118991] usb 2-3: configuration #1 chosen from 1 choice
[ 51.343563] usb 2-4: new full speed USB device using ohci_hcd and address 3
[ 51.494714] usb 2-4: configuration #1 chosen from 1 choice
[ 51.501587] hub 2-4:1.0: USB hub found
[ 51.506489] hub 2-4:1.0: 3 ports detected
[ 51.808264] usb 2-4.1: new full speed USB device using ohci_hcd and address 4
[ 51.912394] usb 2-4.1: configuration #1_MD_DEVS=256, MD_SB_DISKS=27
[ 52.040132] md: bitmap version 4.39
[ 52.044006] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@...hat.com
[ 52.052486] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 52.062048] ALSA device list:
[ 52.065065] No soundcards found.
[ 52.068580] TCP bic registered
[ 52.071700] NET: Registered protocol family 1
[ 52.076497] md: Autodetecting RAID arrays.
[ 52.133378] md: autorun ...
[ 52.136222] md: considering sdb3 ...
[ 52.139871] md: adding sdb3 ...
[ 52.143140] md: sdb1 has different UUID to sdb3
[ 52.147737] md: adding sda3 ...
[ 52.151014] md: sda1 has different UUID to sdb3
[ 52.155722] md: created md1
[ 52.158567] md: bind<sda3>
[ 52.161333] md: bind<sdb3>
[ 52.164111] md: running: <sdb3><sda3>
[ 52.168257] raid1: raid set md1 active with 2 out of 2 mirrors
[ 52.174372] md: considering sdb1 ...
[ 52.178015] md: adding sdb1 ...
[ 52.181313] md: adding sda1 ...
[ 52.184588] md: created md0
[ 52.187431] md: bind<sda1>
[ 52.190206] md: bind<sdb1>
[ 52.192977] md: running: <sdb1><sda1>
[ 52.196832] md: md0: raid array is not clean -- starting background reconstruction
[ 52.204791] raid1: raid set md0 active with 2 out of 2 mirrors
[ 52.210707] md: syncing RAID array md0
[ 52.214504] md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
[ 52.214911] md: ... autorun DONE.
[ 52.224941] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
[ 52.235105] md: using 128k window, over a total of 29294400 blocks.
[ 52.298365] Filesystem "md0": Disabling barriers, not supported by the underlying device
[ 52.340686] XFS mounting filesystem md0
[ 52.454886] Starting XFS recovery on filesystem: md0 (logdev: internal)
[ 54.704519] Ending XFS recovery on filesystem: md0 (logdev: internal)
[ 54.711153] VFS: Mounted root (xfs filesystem) readonly.
[ 54.716593] Freeing unused kernel memory: 216k freed
[ 68.321317] lp: driver loaded but no devices found
[ 1460.922839] general protection fault: 0000 [1] PREEMPT SMP
[ 1460.928466] CPU 1
[ 1460.930492] Modules linked in: raid456 xor binfmt_misc ipv6 container battery asus_acpi ac nfs lockd sunrpc af_packet rtc parport_pc lp parport
[ 1460.943621] Pid: 27424, comm: cc1 Not tainted 2.6.18.3-xenon64-smp.9 #1
[ 1460.950228] RIP: 0010:[<ffffffff810359d0>] [<ffffffff810359d0>] cache_free_debugcheck+0x190/0x280
[ 1460.959193] RSP: 0018:ffff810022163ee8 EFLAGS: 00010046
[ 1460.964503] RAX: ffffff557fffffff RBX: ffff81003ffe9700 RCX: 0000000000000003
[ 1460.971629] RDX: ffffffff8101ae5f RSI: 0000000080042800 RDI: ffff810021921000
[ 1460.978757] RBP: ffff810021921000 R08: 0000000000000000 R09: ffff81002192100e
[ 1460.985883] R10: 000000000000000f R11: ffffffff81030160 R12: ffff81003ffe4980
[ 1460.993003] R13: 0000000000000246 R14: 89e8ae0f0054f325 R15: ffffffff8101ae5f
[ 1461.000130] FS: 00002b6778ac26d0(0000) GS:ffff81003ffac6d0(0000) knlGS:0000000000000000
[ 1461.008209] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1461.013951] CR2: 00002b6779117018 CR3: 000000001d984000 CR4: 00000000000006e0
[ 1461.021079] Process cc1 (pid: 27424, threadinfo ffff810022162000, task ffff810029d847d0)
[ 1461.029157] Stack: ffff810028be73e8 ffff81003ffe9700 ffff81003ffe4980 ffff810021921000
[ 1461.037228] 0000000000000246 ffff810022699530 0000000000000000 ffffffff81007745
[ 1461.044677] ffff810021921000 0000000000000020 ffff810021921000 ffff8100276a34b8
[ 1461.051933] Call Trace:
[ 1461.054572] [<ffffffff81007745>] kmem_cache_free+0xb5/0x110
[ 1461.060225] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.065448] [<ffffffff8106911e>] system_call+0x7e/0x83
[ 1461.070668]
[ 1461.072155]
[ 1461.072156] Code: 49 8b 7e 18 41 8b 4c 24 4c 89 e8 31 d2 29 f8 f7 f1 41 3b 44
[ 1461.081214] RIP [<ffffffff810359d0>] cache_free_debugcheck+0x190/0x280
[ 1461.087839] RSP <ffff810022163ee8>
[ 1461.091321] <3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
[ 1461.099333] in_atomic():0, irqs_disabled():1
[ 1461.103602]
[ 1461.103603] Call Trace:
[ 1461.107545] [<ffffffff810a69a5>] down_read+0x15/0x20
[ 1461.112595] [<ffffffff8109dd40>] blocking_notifier_call_chain+0x20/0x50
[ 1461.119289] [<ffffffff81015fb2>] do_exit+0x22/0x980
[ 1461.124254] [<ffffffff81204c85>] do_unblank_screen+0x85/0x140
[ 1461.130080] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.135303] [<ffffffff81077111>] die+0x51/0x60
[ 1461.139831] [<ffffffff8106ff1d>] do_general_protection+0x10d/0x130
[ 1461.146092] [<ffffffff81069e1d>] error_exit+0x0/0x84
[ 1461.151140] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.156363] [<ffffffff81030160>] dummy_inode_permission+0x0/0x10
[ 1461.162451] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.167673] [<ffffffff810359d0>] cache_free_debugcheck+0x190/0x280
[ 1461.173935] [<ffffffff8103587d>] cache_free_debugcheck+0x3d/0x280
[ 1461.180110] [<ffffffff81007745>] kmem_cache_free+0xb5/0x110
[ 1461.185765] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.190988] [<ffffffff8106911e>] system_call+0x7e/0x83
[ 1461.196208]
[ 1461.197744] general protection fault: 0000 [2] PREEMPT SMP
[ 1461.203359] CPU 1
[ 1461.205385] Modules linked in: raid456 xor binfmt_misc ipv6 container battery asus_acpi ac nfs lockd sunrpc af_packet rtc parport_pc lp parport
[ 1461.218516] Pid: 27424, comm: cc1 Not tainted 2.6.18.3-xenon64-smp.9 #1
[ 1461.225123] RIP: 0010:[<ffffffff810359d0>] [<ffffffff810359d0>] cache_free_debugcheck+0x190/0x280
[ 1461.234086] RSP: 0018:ffff81003ff1fe90 EFLAGS: 00010002
[ 1461.239387] RAX: ffff81003f1d3ea0 RBX: 00000000170fc2a5 RCX: ffff81003ff1ff10
[ 1461.246515] RDX: ffffffff810a1e01 RSI: 0000000000052c00 RDI: ffff81003ffe4840
[ 1461.253642] RBP: ffff81003f1d3d78 R08: 0000000000000102 R09: ffff8100025cb680
[ 1461.260770] R10: 0000000000000001 R11: ffffffff81081a20 R12: ffff81003ffe4840
[ 1461.267897] R13: 00000000170fc2a5 R14: 480039bc3c056348 R15: ffffffff810a1e05
[ 1461.275023] FS: 00002b6778ac26d0(0000) GS:ffff81003ffac6d0(0000) knlGS:0000000000000000
[ 1461.283102] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1461.288838] CR2: 00002b6779117018 CR3: 000000001d984000 CR4: 00000000000006e0
[ 1461.295966] Process cc1 (pid: 27424, threadinfo ffff810022162000, task ffff810029d847d0)
[ 1461.304043] Stack: ffff81003ff1ff00 ffff81003ffa80d8 ffff81003ffe4840 ffff81003f1d3d80
[ 1461.312114] 0000000000000246 000000000000000a ffffffff8101ae5f ffffffff81007745
[ 1461.319563] 0000000000000282 ffff81001d1538c0 ffff8100025cbb60 0000000000000001
[ 1461.326819] Call Trace:
[ 1461.329451] <IRQ> [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.335214] [<ffffffff81007745>] kmem_cache_free+0xb5/0x110
[ 1461.340869] [<ffffffff810a1e05>] __rcu_process_callbacks+0x145/0x1e0
[ 1461.347303] [<ffffffff810a1ec3>] rcu_process_callbacks+0x23/0x50
[ 1461.353393] [<ffffffff81096226>] tasklet_action+0x66/0xb0
[ 1461.358873] [<ffffffff810128cb>] __do_softirq+0x5b/0xd0
[ 1461.364185] [<ffffffff8106a324>] call_softirq+0x1c/0x28
[ 1461.369490] [<ffffffff81077edc>] do_softirq+0x2c/0x90
[ 1461.374626] [<ffffffff810961af>] irq_exit+0x3f/0x50
[ 1461.379588] [<ffffffff81069cc2>] apic_timer_interrupt+0x66/0x6c
[ 1461.385589] <EOI> [<ffffffff81081a20>] flat_send_IPI_mask+0x0/0x50
[ 1461.391870] [<ffffffff8106f24f>] _spin_unlock_irq+0xf/0x40
[ 1461.397439] [<ffffffff8106f249>] _spin_unlock_irq+0x9/0x40
[ 1461.403007] [<ffffffff8106e701>] __down_read+0x31/0xa3
[ 1461.408227] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.413449] [<ffffffff81076ea2>] dump_stack+0x12/0x20
[ 1461.418586] [<ffffffff8100b830>] __might_sleep+0xb0/0xc0
[ 1461.423982] [<ffffffff8109dd40>] blocking_notifier_call_chain+0x20/0x50
[ 1461.430677] [<ffffffff81015fb2>] do_exit+0x22/0x980
[ 1461.435638] [<ffffffff81204c85>] do_unblank_screen+0x85/0x140
[ 1461.441467] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.446688] [<ffffffff81077111>] die+0x51/0x60
[ 1461.451219] [<ffffffff8106ff1d>] do_general_protection+0x10d/0x130
[ 1461.457479] [<ffffffff81069e1d>] error_exit+0x0/0x84
[ 1461.462528] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xfsion+0x0/0x10
[ 1461.473838] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.479062] [<ffffffff810359d0>] cache_free_debugcheck+0x190/0x280
[ 1461.485323] [<ffffffff8103587d>] cache_free_debugcheck+0x3d/0x280
[ 1461.491496] [<ffffffff81007745>] kmem_cache_free+0xb5/0x110
[ 1461.497152] [<ffffffff8101ae5f>] do_sys_open+0xcf/0xf0
[ 1461.502373] [<ffffffff8106911e>] system_call+0x7e/0x83
[ 1461.507597]
[ 1461.509093]
[ 1461.509093] Code: 49 8b 7e 18 41 8b 4c 24 4c 89 e8 31 d2 29 f8 f7 f1 41 3b 44
[ 1461.518151] RIP [<ffffffff810359d0>] cache_free_debugcheck+0x190/0x280
[ 1461.524777] RSP <ffff81003ff1fe90>
[ 1461.528267] <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
--
WebSig: http://www.jukie.net/~bart/sig/
View attachment "config-2.6.18.3" of type "text/plain" (53984 bytes)
Powered by blists - more mailing lists