linux-kernel - Re: 2.6.19-rc6-mm2: uli526x only works after reload

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20061129181809.c55da5e8.akpm@osdl.org>
Date:	Wed, 29 Nov 2006 18:18:09 -0800
From:	Andrew Morton <akpm@...l.org>
To:	"Rafael J. Wysocki" <rjw@...k.pl>
Cc:	linux-kernel@...r.kernel.org, tulip-users@...ts.sourceforge.net,
	netdev@...r.kernel.org, Jeff Garzik <jeff@...zik.org>,
	Valerie Henson <val_henson@...ux.intel.com>
Subject: Re: 2.6.19-rc6-mm2: uli526x only works after reload

On Thu, 30 Nov 2006 02:04:15 +0100
"Rafael J. Wysocki" <rjw@...k.pl> wrote:

> > > 
> > > git-netdev-all.patch
> > > git-netdev-all-fixup.patch
> > > libphy-dont-do-that.patch
> > 
> > Are you able to eliminate libphy-dont-do-that.patch?
> > 
> > > Is a broken-out version of git-netdev-all.patch available from somewhere?
> > 
> > Nope, and my few fumbling attempts to generate the sort of patch series
> > which you want didn't work out too well.  One has to downgrade to
> > git-bisect :(
> > 
> > What does "doesn't work" mean, btw?
> 
> Well, it turns out not to be 100% reproducible.  I can only reproduce it after
> a soft reboot (eg. shutdown -r now).
> 
> Then, while configuring network interfaces the system says the interface name
> is ethxx0, but it should be eth1 (eth0 is an RTL-8139, which is not used).  Now
> if I run ifconfig, it says:
> 
> eth0: error fetching interface information: Device not found
> 
> and that's all (normally, ifconfig would show the information for lo and eth1,
> without eth0).  Moreover, 'ifconfig eth1' says:
> 
> eth1: error fetching interface information: Device not found
> 
> Next, I run 'rmmod uli526x' and 'modprobe uli526x' and then 'ifconfig' is
> still saying the above (about eth0), but 'ifconfig eth1' seems to work as
> it should.  However, the interface often fails to transfer anything after
> that.

Lovely.  Sounds like some startup race, perhaps against userspace.

Is CONFIG_PCI_MULTITHREAD_PROBE set?  (err, we meant to disable that for
2.6.19 but forgot).

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/