| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <45703223.7030000@hi.eclipse.co.uk>
Date: Fri, 01 Dec 2006 13:46:11 +0000
From: Per Börjesson <sky@...eclipse.co.uk>
To: linux-kernel@...r.kernel.org
Subject: PROBLEM: "PCI: Bus #03 (-#06) is hidden behind transparent bridge
#01 (-#03)"
Hi,
I'm sending this because the kernel message said I should :)
[1.] PCI: Bus #03 (-#06) is hidden behind transparent bridge #01 (-#03)
[2.] I recently compiled 2.6.18.3 for my laptop, and when I inspected the logs I found this:
Nov 27 14:46:41 m03r21a2905 kernel: PCI: Bus #03 (-#06) is hidden behind transparent bridge #01 (-#03) (try 'pci=assign-busses')
Nov 27 14:46:41 m03r21a2905 kernel: Please report the result to linux-kernel to fix this permanently
OK, so I added
append="pci=assign-busses"
in lilo.conf and now I see:
Nov 27 14:59:09 m03r21a2905 kernel: PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[3.] Keywords (i.e., modules, networking, kernel): PCI Bus
[4.] linux-2.6.18.3 11% cat /proc/version
Linux version 2.6.18.3 (perbo@...mos) (gcc version 3.4.6) #1 SMP Mon Nov 20 01:29:03 GMT 2006
[5.] Most recent kernel version which did not have the bug: N/A
[6.] Output of Oops.. message: N/A
[7.] A small shell script or example program: N/A
[8.] Environment
[8.1.] Output from scripts/ver_linux:
linux-2.6.18.3 4% sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux m03r21a2905 2.6.18.3 #1 SMP Mon Nov 20 01:29:03 GMT 2006 i686 i686 i386 GNU/Linux
Gnu C 3.4.6
Gnu make 3.81
binutils 2.15.92.0.2
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.38
jfsutils 1.1.11
reiserfsprogs 3.6.19
xfsprogs 2.8.10
pcmcia-cs 3.2.8
quota-tools 3.13.
PPP 2.4.4b1
Linux C Library 2.3.6
Dynamic linker (ldd) 2.3.6
Linux C++ Library 6.0.3
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
Sh-utils 5.97
udev 097
Modules Loaded nfs lockd sunrpc snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ipv6
cm4000_cs usbhid pcmcia usb_storage snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm yenta_socket intel_agp rsrc_nonstatic snd_timer snd_page_alloc
agpgart pcmcia_core ehci_hcd uhci_hcd
[8.2.] Processor information (from /proc/cpuinfo):
linux-2.6.18.3 5% cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 9
model name : Intel(R) Pentium(R) M processor 1400MHz
stepping : 5
cpu MHz : 1400.002
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe up est tm2
bogomips : 2801.73
[8.3.] Module information (from /proc/modules):
linux-2.6.18.3 6% cat /proc/modules
nfs 118064 1 - Live 0xe0439000
lockd 64456 2 nfs, Live 0xe03c3000
sunrpc 157884 3 nfs,lockd, Live 0xe03ee000
snd_seq_dummy 3972 0 - Live 0xe026a000
snd_seq_oss 35520 0 - Live 0xe02da000
snd_seq_midi_event 7488 1 snd_seq_oss, Live 0xe023e000
snd_seq 53584 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live 0xe02b2000
snd_seq_device 8588 3 snd_seq_dummy,snd_seq_oss,snd_seq, Live 0xe0266000
snd_pcm_oss 47584 0 - Live 0xe02c1000
snd_mixer_oss 17856 1 snd_pcm_oss, Live 0xe029e000
ipv6 262944 12 - Live 0xe0381000
cm4000_cs 18136 1 - Live 0xe0298000
usbhid 42272 0 - Live 0xe02a6000
pcmcia 37628 1 cm4000_cs, Live 0xe0275000
usb_storage 28932 0 - Live 0xe026c000
snd_intel8x0 33500 0 - Live 0xe0241000
snd_ac97_codec 92064 1 snd_intel8x0, Live 0xe0280000
snd_ac97_bus 2368 1 snd_ac97_codec, Live 0xe0233000
snd_pcm 82948 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xe024c000
yenta_socket 27404 4 - Live 0xe021b000
intel_agp 22556 1 - Live 0xe022c000
rsrc_nonstatic 13568 1 yenta_socket, Live 0xe0201000
snd_timer 25092 2 snd_seq,snd_pcm, Live 0xe0224000
snd_page_alloc 10376 2 snd_intel8x0,snd_pcm, Live 0xe0206000
agpgart 34824 2 intel_agp, Live 0xe0072000
pcmcia_core 42068 4 cm4000_cs,pcmcia,yenta_socket,rsrc_nonstatic, Live 0xe020f000
ehci_hcd 31624 0 - Live 0xe0060000
uhci_hcd 24524 0 - Live 0xe0069000
[8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
linux-2.6.18.3 7% cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-10ff : PCI CardBus #06
1800-1807 : 0000:00:02.0
1810-181f : 0000:00:1f.1
1810-1817 : ide0
1818-181f : ide1
1820-183f : 0000:00:1d.0
1820-183f : uhci_hcd
1840-185f : 0000:00:1d.1
1840-185f : uhci_hcd
1860-187f : 0000:00:1d.2
1860-187f : uhci_hcd
1880-189f : 0000:00:1f.3
1880-189f : i801_smbus
18c0-18ff : 0000:00:1f.5
18c0-18ff : Intel 82801DB-ICH4
1c00-1cff : 0000:00:1f.5
1c00-1cff : Intel 82801DB-ICH4
2000-207f : 0000:00:1f.6
2400-24ff : 0000:00:1f.6
3000-3fff : PCI Bus #01
3000-30ff : 0000:01:0c.0
3000-30ff : 8139too
32a0-32a8 : pcmcia_socket0
3400-34ff : PCI CardBus #02
3800-38ff : PCI CardBus #02
3c00-3cff : PCI CardBus #06
f800-f87f : motherboard
f880-f8ff : motherboard
fc00-fc7f : 0000:00:1f.0
fc00-fc7f : motherboard
fc00-fc03 : ACPI PM1a_EVT_BLK
fc04-fc05 : ACPI PM1a_CNT_BLK
fc08-fc0b : ACPI PM_TMR
fc10-fc15 : ACPI CPU throttle
fc20-fc20 : ACPI PM2_CNT_BLK
fc28-fc2f : ACPI GPE0_BLK
fc80-fcbf : 0000:00:1f.0
fc80-fcbf : motherboard
fd00-fd6f : motherboard
fe00-fe01 : motherboard
linux-2.6.18.3 8% cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccbff : Video ROM
000cd000-000cdfff : Adapter ROM
000ce000-000cffff : reserved
000f0000-000fffff : System ROM
00100000-1f6effff : System RAM
00100000-0036d7d6 : Kernel code
0036d7d7-004456a3 : Kernel data
1f6f0000-1f6f7fff : ACPI Tables
1f6f8000-1f6fffff : ACPI Non-volatile Storage
1f700000-1fffffff : reserved
30000000-33ffffff : PCI Bus #01
30000000-31ffffff : PCI CardBus #02
32000000-33ffffff : PCI CardBus #06
34000000-340003ff : 0000:00:1f.1
36000000-37ffffff : PCI CardBus #02
38000000-39ffffff : PCI CardBus #06
d0000000-d007ffff : 0000:00:02.0
d0080000-d00fffff : 0000:00:02.1
d0100000-d01003ff : 0000:00:1d.7
d0100000-d01003ff : ehci_hcd
d0100800-d01008ff : 0000:00:1f.5
d0100800-d01008ff : Intel 82801DB-ICH4
d0100c00-d0100dff : 0000:00:1f.5
d0100c00-d0100dff : Intel 82801DB-ICH4
d0200000-d02fffff : PCI Bus #01
d0200000-d02000ff : 0000:01:0c.0
d0200000-d02000ff : 8139too
d0201000-d0201fff : 0000:01:0a.0
d0201000-d0201fff : yenta_socket
d0202000-d0202fff : 0000:01:0a.1
d0202000-d0202fff : yenta_socket
d0210000-d0210fff : pcmcia_socket0
d8000000-dfffffff : 0000:00:02.0
d8000000-d87cffff : vesafb
e0000000-e7ffffff : 0000:00:02.1
fec10000-fec1ffff : reserved
ffb00000-ffbfffff : reserved
fff00000-ffffffff : reserved
[8.5.] PCI information ('lspci -vvv' as root)
linux-2.6.18.3 9% lspci -vvv
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Limited. Unknown device 11d5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] Vendor Specific Information
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Limited. Unknown device 11d5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Limited. Unknown device 11d5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Fujitsu Limited. Unknown device 120e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Fujitsu Limited. Unknown device 120e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Unknown device 11ab
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Unknown device 11ab
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Unknown device 11ab
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. Unknown device 11ab
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=09, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0200000-d02fffff
Prefetchable memory behind bridge: 30000000-33ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Limited. Unknown device 11ab
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 34000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Fujitsu Limited. Unknown device 11ab
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1880 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Fujitsu Limited. Unknown device 11c3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Fujitsu Limited. Unknown device 10d1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 2400 [disabled] [size=256]
Region 1: I/O ports at 2000 [disabled] [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 20)
Subsystem: Fujitsu Limited. Unknown device 10e6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0201000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 36000000-37fff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 20)
Subsystem: Fujitsu Limited. Unknown device 10e6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0202000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 32000000-33fff000 (prefetchable)
Memory window 1: 38000000-39fff000
I/O window 0: 00003c00-00003cff
I/O window 1: 00001000-000010ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Fujitsu Limited. Unknown device 11bd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[8.6.] SCSI information (from /proc/scsi/scsi)
linux-2.6.18.3 10% cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: NEC Model: USB UF000x Rev: 1.50
Type: Direct-Access ANSI SCSI revision: 02
[8.7.] Other information that might be relevant to the problem
I have attached .config used to compile the kernel and also a copy of /var/log/syslog
with boot messages before and after the "append message".
Regards
Per Börjesson
View attachment "config.m03r21a2905" of type "text/plain" (39610 bytes)
View attachment "syslog" of type "text/plain" (12817 bytes)
Powered by blists - more mailing lists