[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <4572B30F.9020605@wpkg.org>
Date: Sun, 03 Dec 2006 12:20:47 +0100
From: Tomasz Chmielewski <mangoo@...g.org>
To: linux-kernel@...r.kernel.org
Subject: why can't I remove a kernel module (or: what uses a given module)?
There is something I don't understand about loading and unloading kernel
modules.
I have a SATA controller, it uses a sata_mv driver.
The drive connected to it is not used; it just "merely exists" - no one
touches it.
This is why I don't understand why I can't remove such a module:
1.
# rmmod sata_mv
ERROR: Module sata_mv is in use
The module was loaded automatically during the system boot.
mount claims no /dev/sda* partition is mounted.
2.
In a second scenario, I move the kernel:
# mv /lib/modules/2.6.19/kernel/drivers/ata/sata_mv.ko /root
# reboot
And load it later manually:
# insmod ./sata_mv
# dmesg -c
sata_mv 0000:01:00.0: version 0.7
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 23
(...)
SCSI device sda: drive cache: write back
sda: sda1
sd 24:0:0:0: Attached scsi disk sda
We can remove the module without problems:
# rmmod sata_mv
# dmesg -c
Synchronizing SCSI cache for disk sda:
ACPI: PCI interrupt for device 0000:01:00.0 disabled
Now I could remove the module without problems.
What was using the module in the first scenario (I couldn't remove the
module)?
--
Tomasz Chmielewski
http://wpkg.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists