[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <m17ix24ywj.fsf@ebiederm.dsl.xmission.com>
Date: Fri, 08 Dec 2006 00:42:04 -0700
From: ebiederm@...ssion.com (Eric W. Biederman)
To: "Lu, Yinghai" <yinghai.lu@....com>
Cc: "Greg KH" <gregkh@...e.de>,
"Peter Stuge" <stuge-linuxbios@....org>,
linux-usb-devel@...ts.sourceforge.net,
"Stefan Reinauer" <stepan@...esystems.de>,
linux-kernel@...r.kernel.org, linuxbios@...uxbios.org,
"Andi Kleen" <ak@...e.de>, "David Brownell" <david-b@...bell.net>
Subject: Re: [LinuxBIOS] [linux-usb-devel] [RFC][PATCH 0/2] x86_64 Early usb debug port support.
"Lu, Yinghai" <yinghai.lu@....com> writes:
> -----Original Message-----
> From: linuxbios-bounces@...uxbios.org
> [mailto:linuxbios-bounces@...uxbios.org] On Behalf Of
> ebiederm@...ssion.com
>
>
>>Ok due to popular demands here is the slightly fixed patch that works
>>on both i386 and x86_64. For the i386 version you must not have
>>HIGHMEM64G enabled.
>
>>I just rolled it all into one patch as I'm to lazy to transmit all
>>3 of them.
>
>
> I got
>
> Firmware type: LinuxBIOS
> Linux version 2.6.19-smp-gc9976797-dirty (root@...rv) (gcc version
> 4.0.2) #196 6
> Command line: earlyprintk=ttyS0,115200 apic=debug pci=noacpi,routeirq
> snd-hda-i
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000001000 (reserved)
> BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
> BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
> dbgp_num: 0
> Found EHCI debug port
> bar: 10 offset: 098
> bar: 10 offset: 098
> dbgp pre-set_fixmap_nocache
> PANIC: early exception rip ffffffff809c24b4 error 0 cr2 ffff810000203ff8
>
> Call Trace:
> [<ffffffff809c24b4>] __set_fixmap+0x84/0x202
> [<ffffffff809c05bb>] early_dbgp_init+0x259/0x55c
> [<ffffffff8022d958>] __call_console_drivers+0x64/0x72
> [<ffffffff809b242b>] do_early_param+0x0/0x57
> [<ffffffff809c0a20>] setup_early_printk+0x162/0x17e
> [<ffffffff809b2459>] do_early_param+0x2e/0x57
> [<ffffffff8023d051>] parse_args+0x159/0x1f3
> [<ffffffff809b24c2>] parse_early_param+0x40/0x4c
> [<ffffffff809b88ca>] setup_arch+0x1c1/0x636
> [<ffffffff809b2534>] start_kernel+0x55/0x208
> [<ffffffff809b2173>] _sinittext+0x173/0x177
>
> RIP __set_fixmap+0x84/0x202
Ugh. I'd check the code. But it looks like my tweak to the
early fixmap code. But my hunch is that my tweak to __fixmap
so that it's pud and pmd were prepopulated didn't take on
your build.
> With Eric code in LinuxBIOS, it will report "No device found in debug
> port"
Hmm. At least this is partial progress :)
Eric
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists