linux-kernel - Re: single bit errors on files stored on USB-HDDs via USB2/usb

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20061208093232.GA8065@DervishD>
Date:	Fri, 8 Dec 2006 10:32:32 +0100
From:	DervishD <lkml@...vishd.net>
To:	Matthias Schniedermeyer <ms@...d.de>
Cc:	linux-kernel@...r.kernel.org, usb-storage@...ts.one-eyed-alien.net
Subject: Re: single bit errors on files stored on USB-HDDs via USB2/usb_storage

    Hi Matthias :)

 * Matthias Schniedermeyer <ms@...d.de> dixit:
> >  * Matthias Schniedermeyer <ms@...d.de> dixit:
> > 
> >>Today i copied a few files back and checked them against the stored
> >>MD5 sums and 5 files of 86 (each about 700 MB) had errors. So i
> >>copied the 5 files again. 4 of the files were OK after that and
> >>coping the last file the third time also resulted in the correct
> >>MD5.
> > 
> > I had more or less the same issue a week or two ago. I performed
> > lots of tests and only by replacing the USB2.0 PCI card, the USB
> > cable and the power supply of the usb-hdd adapter got the
> > problem solved.
> > 
> The 38 HDDs are in 38 enclosures, so each has it's own power supply. I
> have used different cables and i replaced the USB-Controller once.
> 
> So it can't be a single faulty component. Except when the computer
> itself would be the culprit.

    In my case, the same applied: the problem didn't seem to be a single
faulty component, but a combination. Since I finally wasn't able to
check in another computer where I could carry tests, or check under
windows in the same machine, I don't know if the problem was a faulty
device driver, a faulty motherboard, RAM problems (although memtest said
my RAM was OK), etc.

> >     The best advice I can give you, from my limited experience with the
> > problem, is: replace the cable. This minimizes the chance of corrupted
> > data getting into the adapter. If that doesn't solve the problem, try
> > removing any unconnected cable that is plugged into the USB card.
> 
> Hmmm. That's the only thing that i currently may be doing wrong.
> I have a 1,5 Meter and a 4,5 Meter cable connected to the USB-Controller
> and i only use of them depending on where the HDD is placed in my room,
> the other one is dangling unconnected.

    I don't know why the heck this was causing problems, since any
electric noise that could be picked from the dangling cable shouldn't
affect neither the card nor the other USB ports, but...

    Raúl Núñez de Arenas Coronado

-- 
Linux Registered User 88736 | http://www.dervishd.net
It's my PC and I'll cry if I want to... RAmen!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/