| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1061208010531.21294@suse.de>
Date: Fri, 8 Dec 2006 12:05:31 +1100
From: NeilBrown <neilb@...e.de>
To: Andrew Morton <akpm@...l.org>
Cc: linux-raid@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 001 of 5] md: Remove some old ifdefed-out code from raid5.c
There are some vestiges of old code that was used for bypassing the
stripe cache on reads in raid5.c. This was never updated after the
change from buffer_heads to bios, but was left as a reminder.
That functionality has nowe been implemented in a completely different
way, so the old code can go.
Signed-off-by: Neil Brown <neilb@...e.de>
### Diffstat output
./drivers/md/raid5.c | 63 ---------------------------------------------------
1 file changed, 63 deletions(-)
diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c 2006-12-06 14:23:10.000000000 +1100
+++ ./drivers/md/raid5.c 2006-12-06 14:31:26.000000000 +1100
@@ -544,35 +544,7 @@ static int raid5_end_read_request(struct
}
if (uptodate) {
-#if 0
- struct bio *bio;
- unsigned long flags;
- spin_lock_irqsave(&conf->device_lock, flags);
- /* we can return a buffer if we bypassed the cache or
- * if the top buffer is not in highmem. If there are
- * multiple buffers, leave the extra work to
- * handle_stripe
- */
- buffer = sh->bh_read[i];
- if (buffer &&
- (!PageHighMem(buffer->b_page)
- || buffer->b_page == bh->b_page )
- ) {
- sh->bh_read[i] = buffer->b_reqnext;
- buffer->b_reqnext = NULL;
- } else
- buffer = NULL;
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (sh->bh_page[i]==bh->b_page)
- set_buffer_uptodate(bh);
- if (buffer) {
- if (buffer->b_page != bh->b_page)
- memcpy(buffer->b_data, bh->b_data, bh->b_size);
- buffer->b_end_io(buffer, 1);
- }
-#else
set_bit(R5_UPTODATE, &sh->dev[i].flags);
-#endif
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
@@ -618,14 +590,6 @@ static int raid5_end_read_request(struct
}
}
rdev_dec_pending(conf->disks[i].rdev, conf->mddev);
-#if 0
- /* must restore b_page before unlocking buffer... */
- if (sh->bh_page[i] != bh->b_page) {
- bh->b_page = sh->bh_page[i];
- bh->b_data = page_address(bh->b_page);
- clear_buffer_uptodate(bh);
- }
-#endif
clear_bit(R5_LOCKED, &sh->dev[i].flags);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
@@ -1619,15 +1583,6 @@ static void handle_stripe5(struct stripe
} else if (test_bit(R5_Insync, &dev->flags)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
-#if 0
- /* if I am just reading this block and we don't have
- a failed drive, or any pending writes then sidestep the cache */
- if (sh->bh_read[i] && !sh->bh_read[i]->b_reqnext &&
- ! syncing && !failed && !to_write) {
- sh->bh_cache[i]->b_page = sh->bh_read[i]->b_page;
- sh->bh_cache[i]->b_data = sh->bh_read[i]->b_data;
- }
-#endif
locked++;
PRINTK("Reading block %d (sync=%d)\n",
i, syncing);
@@ -1645,9 +1600,6 @@ static void handle_stripe5(struct stripe
dev = &sh->dev[i];
if ((dev->towrite || i == sh->pd_idx) &&
(!test_bit(R5_LOCKED, &dev->flags)
-#if 0
-|| sh->bh_page[i]!=bh->b_page
-#endif
) &&
!test_bit(R5_UPTODATE, &dev->flags)) {
if (test_bit(R5_Insync, &dev->flags)
@@ -1659,9 +1611,6 @@ static void handle_stripe5(struct stripe
/* Would I have to read this buffer for reconstruct_write */
if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx &&
(!test_bit(R5_LOCKED, &dev->flags)
-#if 0
-|| sh->bh_page[i] != bh->b_page
-#endif
) &&
!test_bit(R5_UPTODATE, &dev->flags)) {
if (test_bit(R5_Insync, &dev->flags)) rcw++;
@@ -2197,15 +2146,6 @@ static void handle_stripe6(struct stripe
} else if (test_bit(R5_Insync, &dev->flags)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
-#if 0
- /* if I am just reading this block and we don't have
- a failed drive, or any pending writes then sidestep the cache */
- if (sh->bh_read[i] && !sh->bh_read[i]->b_reqnext &&
- ! syncing && !failed && !to_write) {
- sh->bh_cache[i]->b_page = sh->bh_read[i]->b_page;
- sh->bh_cache[i]->b_data = sh->bh_read[i]->b_data;
- }
-#endif
locked++;
PRINTK("Reading block %d (sync=%d)\n",
i, syncing);
@@ -2224,9 +2164,6 @@ static void handle_stripe6(struct stripe
if (!test_bit(R5_OVERWRITE, &dev->flags)
&& i != pd_idx && i != qd_idx
&& (!test_bit(R5_LOCKED, &dev->flags)
-#if 0
- || sh->bh_page[i] != bh->b_page
-#endif
) &&
!test_bit(R5_UPTODATE, &dev->flags)) {
if (test_bit(R5_Insync, &dev->flags)) rcw++;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists